Palworld

Palworld

AVERAGE FPS
74
good

This combination provides smooth gameplay with an average of 74 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 35 45 55
1440p QHD 47 62 81 100
1080p Full HD 72 95 123 152

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 55
3840x2160 Medium 45
3840x2160 High 35
3840x2160 Ultra 26
2560x1440 Low 100
2560x1440 Medium 81
2560x1440 High 62
2560x1440 Ultra 47
1920x1080 Low 152
1920x1080 Medium 123
1920x1080 High 95
1920x1080 Ultra 72

Palworld with AMD Ryzen 7 9700F + AMD Radeon RX 6600 XT, In-Depth Analysis

Palworld, the survival-crafting phenomenon, places unique demands on hardware, blending a vast open world with physics-driven base building. This analysis examines the measured performance of the AMD Ryzen 7 9700F paired with the AMD Radeon RX 6600 XT across three resolutions and four quality presets. The data reveals a configuration that is highly capable at mainstream resolutions, but which faces clear limitations at 4K, where the GPU becomes the definitive bottleneck.

Resolution Scaling

The measured FPS data shows a steep and predictable performance curve as resolution scales from 1920x1080 up to 3840x2160. At the High preset, the average frame rate drops from 95 FPS at 1080p to 62 FPS at 1440p, and finally to 35 FPS at 4K. This represents a 63% reduction in average FPS from 1080p to 4K. The pattern holds across all settings, but the severity of the drop is most pronounced at the Ultra preset, which falls from 72 FPS at 1080p to 47 FPS at 1440p, and then plummets to 26 FPS at 4K. The 1080p to 1440p transition costs roughly one-third of the performance, while the jump to 4K from 1440p is even more punishing, often cutting frame rates nearly in half.

This scaling behavior is a classic indicator of a GPU-bound scenario. As resolution increases, the number of pixels the AMD Radeon RX 6600 XT must fill expands exponentially. The data shows that the gap between the Low and Ultra presets widens significantly at higher resolutions. At 1080p, the difference between Low (152 FPS) and Ultra (72 FPS) is 80 FPS. At 4K, the same comparison yields only a 29 FPS difference (55 FPS vs 26 FPS). This compression of the performance spread at 4K suggests that the GPU is saturated with pixel throughput work, leaving less headroom for the additional shading and texture work that higher presets demand.

The 1440p results provide the most balanced picture of the system's capability. The average scores of 100 FPS on Low and 62 FPS on High demonstrate that the GPU still has enough bandwidth to respond to settings changes effectively. However, the 4K results, particularly the 26 FPS average on Ultra, indicate that this resolution is not viable for a smooth experience with this combination. The limiting component at 4K is unequivocally the graphics card, as the CPU's role diminishes when the GPU is struggling to maintain even 35 FPS on High. The data suggests that players targeting 4K would need to drastically reduce settings or accept a sub-30 FPS experience, as even the Low preset only manages to reach 55 FPS.

GPU Role

The AMD Radeon RX 6600 XT is the central figure in this performance analysis, and its characteristics directly explain the observed frame rates. The GPU is built on the RDNA 2.0 architecture with a 7 nm process and features 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 256.0 GB/s. Its boost clock is rated at 2589 MHz, with a game clock of 2359 MHz. These specifications position the card firmly in the mid-range segment, a fact corroborated by its benchmark percentile of 70, meaning it outperforms 70% of all GPUs in the database.

In Palworld, the GPU's role is paramount. The game's visual style, with dense foliage and expansive vistas, relies heavily on pixel throughput and texture bandwidth. The data shows that the RX 6600 XT delivers playable frame rates at 1080p across all presets, with an average of 95 FPS on High. The card's 8 GB VRAM appears sufficient for these settings, as no min FPS data is recorded for High, suggesting stable performance. However, the strain becomes evident at 4K Ultra, where the average FPS drops to 26. This is not merely a function of raw compute power but also of memory bandwidth; the 256.0 GB/s bus is likely saturated by the massive texture loads at 4K resolution.

Comparing the RX 6600 XT to its nearest rivals contextualizes its performance. In the database, it sits just 0.7% above the NVIDIA GeForce GTX 1630, and 1.1% above the NVIDIA GeForce RTX 2080 SUPER. The close margin to the GTX 1630 is surprising, but the deltaPct values are based on average benchmark scores, not specific game performance. The 1.1% lead over the RTX 2080 SUPER, a card from a higher tier, suggests that the RX 6600 XT is well-optimized in synthetic tests. The GPU's compute capabilities, measured at 10.60 TFLOPS FP32, are respectable, but the data indicates that Palworld's real-world load is more dependent on memory subsystem efficiency and raw fill rate, where the card's 165.7 GPixel/s pixel rate comes into play.

The lack of min FPS data for most settings, except for Medium, makes it difficult to judge frame time consistency. However, the Medium preset provides a clear picture: at 1440p, the average is 81 FPS with a min of 69 FPS and a max of 93 FPS. This 12 FPS variance between average and minimum suggests occasional dips, likely during scene transitions or when many objects are on screen. The GPU's 32 RT cores are present, but Palworld does not heavily utilize ray tracing, so their impact on the measured results is minimal. Overall, the RX 6600 XT is the primary driver of performance scaling, and its 8 GB VRAM and 256.0 GB/s bandwidth are the key constraints at higher resolutions.

CPU Role

The AMD Ryzen 7 9700F provides the computational foundation for this configuration, and its specifications are well-suited to Palworld's CPU-intensive simulation logic. This processor is part of the 9000 series, built on the Zen 5 architecture (Granite Ridge) using a 4 nm process. It features 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. The 65 W TDP is notably efficient, and the CPU sits in the 94th percentile of all CPUs, indicating top-tier performance in general benchmarks.

In the context of Palworld, the CPU is responsible for managing the game's world simulation, including the AI of Pals, item physics, and base-building logic. The benchmark results show a strong single-threaded performance, with a Passmark single-thread score of 4691. This is crucial for a game like Palworld, which often has a primary game thread that cannot be fully parallelized. The multi-threaded score of 36470 indicates that the 8-core, 16-thread configuration has ample headroom for background tasks and the game's secondary threads. The data suggests that the CPU is not the limiting factor in this configuration, as the frame rates scale so heavily with resolution, which is a GPU-centric workload.

The CPU's nearest rivals in the database reinforce its strong standing. It scores 0.2% higher than the AMD Ryzen 9 7940HX and 0.7% higher than the AMD Ryzen 9 7950X. Interestingly, it is 0.2% lower than the Intel Core i7-14700KF. These marginal differences (all within 1%) suggest that for gaming, the Ryzen 7 9700F is effectively on par with these high-end alternatives. The 32 MB of shared L3 cache is also a positive indicator for gaming performance, as it can store frequently accessed game data, reducing latency. The CPU's memory bandwidth of 89.6 GB/s via dual-channel DDR5 support ensures that the GPU is fed with data without a significant bottleneck.

Given that the GPU is clearly the limiting factor at 4K, the CPU's role is to ensure that frame rates do not drop further due to processing overhead. The data shows that at 1080p Low, where the GPU load is lighter, the system achieves 152 FPS. This high frame rate indicates that the CPU can handle the game's logic at a very high speed, and it is not holding back the GPU at lower resolutions. The Ryzen 7 9700F's performance headroom means that players can expect consistent performance as long as the GPU is not overwhelmed. In summary, the CPU provides a robust platform that allows the RX 6600 XT to operate at its full potential, and its high percentile ranking suggests it will remain relevant for future titles.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this configuration depend heavily on the target resolution and desired frame rate. The data provides a clear matrix of performance across all four presets, allowing for specific recommendations. For a smooth 60 FPS experience, the Medium preset is the safest choice at 1440p, where it delivers an average of 81 FPS with a minimum of 69 FPS. This provides a comfortable margin above the 60 FPS threshold, ensuring that dips do not become noticeable. At 1080p, the High preset is recommended, as it achieves 95 FPS on average, offering a significant visual upgrade over Medium with still-excellent performance.

For players prioritizing maximum visual fidelity, the Ultra preset is only viable at 1080p, where it hits an average of 72 FPS. This is playable, but it does not leave much headroom for demanding scenes, and the lack of min FPS data for this setting makes it difficult to guarantee consistency. The 1440p Ultra setting, at 47 FPS, is borderline and may be acceptable for those who prefer visuals over smoothness, but it is not recommended for fast-paced gameplay. At 4K, the options are severely limited. The Low preset is the only one that offers a semi-playable experience at 55 FPS, but this comes with a significant visual compromise. The High preset at 4K (35 FPS) and Ultra (26 FPS) are not recommended for any serious gaming session.

The data suggests that the "sweet spot" for this hardware is 1440p with Medium settings. This combination yields an average of 81 FPS, which is smooth enough for most players, while the Medium preset typically retains the core visual identity of the game without the extreme demands of Ultra. The min FPS of 69 for this setting is also reassuring, indicating that the system does not suffer from severe frame drops. For 1080p users, High is the clear winner, providing a high frame rate that takes advantage of higher refresh rate monitors. Ultimately, players should avoid 4K unless they are willing to accept Low settings and a frame rate that hovers near 55 FPS. The performance gap between Medium and Ultra is substantial in this game, and the measured data shows that the RX 6600 XT is best utilized with settings that balance load between the GPU and CPU.

FAQ

Q: Can this system run Palworld at 4K 60 FPS?

A: No. The measured data shows the highest average FPS at 4K is 55 FPS on the Low preset. The High and Ultra presets only reach 35 FPS and 26 FPS respectively, making 60 FPS at 4K unattainable with this configuration.

Q: What is the best resolution and settings combination for a consistent 60 FPS experience?

A: The 1440p Medium preset is the best option, delivering an average of 81 FPS with a minimum of 69 FPS. This provides a stable experience above the 60 FPS target. At 1080p, the High preset achieves 95 FPS on average, which is also an excellent choice.

Q: How does the RX 6600 XT compare to its closest rivals in terms of benchmark scores?

A: The RX 6600 XT has an average benchmark score of 24442. It is 0.7% higher than the NVIDIA GeForce GTX 1630 and 1.1% higher than the NVIDIA GeForce RTX 2080 SUPER. It is 0.8% lower than the Intel Arc A350M.

Q: Is the AMD Ryzen 7 9700F a bottleneck for the RX 6600 XT in Palworld?

A: No, the data indicates the CPU is not the limiting factor. The system achieves 152 FPS at 1080p Low, showing high CPU capability. The frame rates drop significantly with resolution, which points to the GPU as the primary bottleneck.

Q: What is the performance difference between the Low and Ultra presets at 1080p?

A: At 1920x1080, the Low preset averages 152 FPS, while the Ultra preset averages 72 FPS. This is a difference of 80 FPS, showing that the Ultra preset imposes a significant performance cost.

Q: What is the average FPS for the Medium preset at 1440p, and what are the min and max values?

A: At 2560x1440 with Medium settings, the average FPS is 81. The minimum recorded FPS is 69, and the maximum recorded FPS is 93.

Measured FPS Breakdown

The following data represents the exact measured averages for the AMD Ryzen 7 9700F and AMD Radeon RX 6600 XT combination in Palworld.

1920x1080 (1080p)

  • Ultra: Average 72 FPS
  • High: Average 95 FPS
  • Medium: Average 123 FPS (Min 104 FPS, Max 141 FPS)
  • Low: Average 152 FPS

2560x1440 (1440p)

  • Ultra: Average 47 FPS
  • High: Average 62 FPS
  • Medium: Average 81 FPS (Min 69 FPS, Max 93 FPS)
  • Low: Average 100 FPS

3840x2160 (4K)

  • Ultra: Average 26 FPS
  • High: Average 35 FPS
  • Medium: Average 45 FPS (Min 38 FPS, Max 52 FPS)
  • Low: Average 55 FPS

The data clearly shows a linear progression of performance from 1080p to 4K, with the Medium preset providing the only complete min/max data across all resolutions. The system ranks 2066 out of 2944 total combinations for this game, indicating that while it is not a top-tier setup for Palworld, it offers a solid mid-range experience, particularly at 1080p and 1440p.

Hardware Specifications

AMD Ryzen 7 9700F

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 5500 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 6600 XT

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2589 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 9700F + AMD Radeon RX 6600 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 55.0
3840x2160 Medium 45.0
3840x2160 High 35.0
3840x2160 Ultra 26.0
2560x1440 Low 100.0
2560x1440 Medium 81.0
2560x1440 High 62.0
2560x1440 Ultra 47.0
1920x1080 Low 152.0
1920x1080 Medium 123.0
1920x1080 High 95.0
1920x1080 Ultra 72.0

Palworld with Ryzen 7 9700F + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 6600 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 7 9700F + RX 6600 XT

Explore FPS benchmarks for other games using this same hardware combination.