Palworld

FAQ

Q: What is the combo rank of the AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce RTX 4090 in Palworld?

A: This combination ranks 167th out of 3711 tested combos in Palworld, placing it in the top 4.5% of all configurations tested for this game.

Q: What are the core and thread counts of the AMD Ryzen 7 5800X3D?

A: The CPU features 8 cores and 16 threads, with a base clock of 3.40 GHz and a boost clock of 4.50 GHz. It draws a 105W TDP and uses the AMD Socket AM4 platform.

Q: What is the VRAM capacity and memory type of the RTX 4090?

A: The GPU comes with 24 GB of GDDR6X memory on a 384-bit bus, delivering a memory bandwidth of 1.01 TB/s. Its base clock is 2235 MHz with a boost clock of 2520 MHz.

Q: What is the average FPS at 1440p with High settings in Palworld?

A: At 2560x1440 with High settings, the combo produces an average of 144 FPS. For comparison, at 1080p High the average rises to 219 FPS, and at 4K High it drops to 80 FPS.

Q: How does the CPU's multi-threaded performance compare to its nearest rivals?

A: The Ryzen 7 5800X3D's average benchmark score is 27896, essentially matching the AMD Ryzen 7 6800U (27887, 0% delta) and the Intel Core i9-10900K (27872, 0.1% delta). It sits slightly behind the AMD Ryzen AI 5 PRO 340 (27932, -0.1% delta) and ahead of the Intel Core i5-12600KF (27799, 0.3% delta).

Q: What does the data show about performance scaling from Low to Ultra at 4K?

A: At 3840x2160, average FPS drops from 128 on Low to 104 on Medium, then to 80 on High, and finally to 61 on Ultra. This represents a 52% reduction from Low to Ultra, indicating the GPU becomes the primary limiter at higher settings.

How This Combo Ranks

The data places this Ryzen 7 5800X3D + RTX 4090 pairing at rank 167 out of 3711 tested combinations in Palworld. That positions it in the 95.5th percentile of all combos tested for this survival game. The ranking reflects a system that is near the top of the performance hierarchy, though not the absolute fastest configuration available.

The gap between this rank and the top of the list is largely attributable to the CPU's single-thread performance ceiling relative to newer architectures. The Ryzen 7 5800X3D's single-thread benchmark scores sit at 884 in 3DMark single-thread and 1452 in Cinebench R23 single-core, which are respectable but not class-leading numbers. The RTX 4090, by contrast, dominates in GPU benchmarks with a Passmark G3D score of 38194 and a 3DMark Steel Nomad DX12 score of 9223, placing it in the 88th percentile of all GPUs.

The combination's rank is particularly strong considering the CPU's overall percentile of 80 among all processors. The GPU's 88th percentile ranking compensates for the CPU's relative position, resulting in a combo that outperforms the majority of tested systems. The 0% delta to the AMD Ryzen 7 6800U and the 0.1% delta to the Intel Core i9-10900K in CPU average score suggest that the processor is competitive with other high-end options, but the data shows the GPU carries the heavier load in achieving this combo's rank.

CPU Role

The AMD Ryzen 7 5800X3D brings 8 cores and 16 threads based on the Zen 3 architecture, codenamed Vermeer, manufactured on a 7 nm process at TSMC. The CPU's 96 MB of shared L3 cache is a defining feature, providing substantial cache capacity that benefits games with large working sets. The base clock of 3.40 GHz and boost clock of 4.50 GHz define its operational envelope, with a 105W TDP indicating moderate power requirements.

In Palworld, the CPU's role is most evident at lower resolutions where the GPU is not fully taxed. The data shows that at 1080p Low, the combo achieves 305 average FPS, while at 1080p Ultra it drops to 166 average FPS. This 46% reduction across settings at the same resolution indicates the CPU can feed frames at very high rates, but the settings load shifts the bottleneck toward the GPU. The 3DMark multi-threaded scores of 7299 (16 threads) and 5906 (8 threads) demonstrate strong scaling across cores, which supports the game's ability to use multiple threads for world simulation and creature AI.

Compared to its nearest rivals, the 5800X3D's average benchmark score of 27896 is within 0.3% of the Intel Core i5-12600KF (27799). The 0.1% delta to the Intel Core i9-10900K (27872) shows parity with a higher-core-count competitor. The CPU's 16 threads are fully utilized in Palworld's more demanding scenes, as indicated by the passmark multithread score of 28309 and the Cinebench R23 multicore score of 14317. These scores suggest the processor can handle the game's background simulation tasks while maintaining high frame rates in the foreground.

Measured FPS Breakdown

At 1920x1080, the combo delivers an average of 305 FPS on Low settings, 283 FPS on Medium (with a minimum of 241 and maximum of 325), 219 FPS on High, and 166 FPS on Ultra. The Medium setting's minimum of 241 FPS indicates that even in demanding scenes, the frame rate stays well above 240 Hz, making this resolution ideal for high-refresh-rate displays.

Moving to 2560x1440, the averages are 231 FPS on Low, 187 FPS on Medium (minimum 159, maximum 215), 144 FPS on High, and 109 FPS on Ultra. The 1440p Medium minimum of 159 FPS suggests the system can maintain smooth gameplay on 144 Hz monitors even during intense moments, while Ultra settings still clear the 100 FPS threshold.

At 3840x2160, performance scales down to 128 FPS on Low, 104 FPS on Medium (minimum 88, maximum 120), 80 FPS on High, and 61 FPS on Ultra. The 4K Medium minimum of 88 FPS indicates playable performance, but Ultra settings at 61 FPS average leave little headroom for VRR displays with 60 Hz minimum requirements. The 4K Ultra result is the only configuration where the average FPS falls below 80, highlighting the resolution's demand on the GPU.

The progression from Low to Ultra at each resolution shows a consistent pattern: the percentage drop from Low to Ultra is roughly 46% at 1080p, 53% at 1440p, and 52% at 4K. This consistency suggests the settings scaling is well-balanced across resolutions, with the GPU becoming progressively more dominant as resolution increases.

GPU Role

The NVIDIA GeForce RTX 4090 is built on the Ada Lovelace architecture with the AD102 chip, manufactured on a 5 nm process at TSMC. It packs 16,384 shading units, 512 texture mapping units, and 176 ROPs, along with 128 RT cores and 512 tensor cores. The GPU's 24 GB of GDDR6X memory on a 384-bit bus provides 1.01 TB/s of bandwidth, which is critical for Palworld's open-world textures and asset streaming.

The GPU's clock speeds of 2235 MHz base and 2520 MHz boost translate to 82.58 TFLOPS of FP32 compute, positioning it as one of the most powerful consumer GPUs available. The 450W TDP and 850W suggested PSU indicate the power demands of this card, while the triple-slot design and 304 mm length require significant case clearance.

In Palworld, the RTX 4090's role becomes dominant at higher resolutions and settings. The data shows that at 4K Ultra, the average FPS drops to 61, which is a 52% reduction from 4K Low's 128 FPS. This substantial drop indicates that Ultra settings at 4K are heavily GPU-bound, with the card's raw compute and memory bandwidth being the limiting factors. The GPU's 88th percentile ranking among all GPUs, with an average benchmark score of 60347, places it well above the vast majority of alternatives.

The nearest rival comparisons show the RTX 4090's average score is essentially tied with the Intel Arc Pro A60 (60326, 0% delta) and the AMD Radeon Pro Vega 48 (60140, 0.3% delta), though these are workstation-grade cards rather than direct gaming competitors. The 2.9% delta to the AMD Radeon PRO V710 (58657) shows the 4090 holds a clear advantage within this benchmark grouping.

Settings Recommendations

The measured data suggests that Medium settings provide the most balanced experience across all resolutions. At 1080p Medium, the combo delivers 283 average FPS with a minimum of 241, which far exceeds the refresh rate of most displays. At 1440p Medium, the 187 average FPS and 159 minimum ensure smooth gameplay on 144 Hz monitors, while still maintaining high visual quality. Even at 4K Medium, the 104 average FPS with a minimum of 88 provides a playable experience on high-refresh-rate 4K panels.

High settings offer a modest visual upgrade but come with a measurable performance cost. The data shows 219 FPS at 1080p High, 144 FPS at 1440p High, and 80 FPS at 4K High. The 1440p High result is sufficient for 144 Hz displays, while 4K High's 80 FPS average is adequate for 60 Hz panels but leaves less headroom for demanding scenes.

Ultra settings are only recommended for 1080p and 1440p, where the 166 FPS and 109 FPS averages respectively provide playable frame rates. At 4K Ultra, the 61 FPS average is borderline, particularly when considering the minimum FPS could dip below 60 in heavy combat or complex base-building scenes. For players prioritizing frame rate stability over maximum visual fidelity, Medium at 4K or High at 1440p appear to be the sweet spots in this dataset.

Low settings are included in the measurements primarily for understanding the performance ceiling. The 305 FPS at 1080p Low and 128 FPS at 4K Low demonstrate the system's raw capability, but these settings are unlikely to provide an optimal visual experience for a game like Palworld that emphasizes exploration and building.

Resolution Scaling

The data reveals a clear pattern in how performance scales from 1080p to 4K. At High settings, the average FPS drops from 219 at 1080p to 144 at 1440p (a 34% reduction) and then to 80 at 4K (a further 44% reduction from 1440p). This indicates that the GPU's workload increases significantly with resolution, as the RTX 4090 must render 2.25 times as many pixels at 1440p versus 1080p, and 4 times as many at 4K versus 1080p.

Examining Medium settings, the drop is from 283 FPS at 1080p to 187 FPS at 1440p (34% reduction) and then to 104 FPS at 4K (44% reduction from 1440p). This consistent scaling pattern suggests that the GPU is the primary limiting component across all resolutions, with the CPU maintaining sufficient headroom to avoid becoming a bottleneck even at lower resolutions.

At Low settings, the scaling is similar: 305 FPS at 1080p, 231 FPS at 1440p (24% reduction), and 128 FPS at 4K (45% reduction from 1440p). The smaller reduction from 1080p to 1440p at Low settings (24%) compared to High settings (34%) indicates that at Low, the CPU has a slightly larger influence on the frame rate at 1080p, but the GPU still dominates as resolution increases.

The 4K Ultra result of 61 FPS versus 1080p Ultra's 166 FPS represents a 63% reduction, which is the largest percentage drop in the dataset. This confirms that Ultra settings at 4K push the RTX 4090 to its limits, with the GPU's rendering load becoming the definitive constraint. The data as a whole shows a system that is balanced at 1080p and 1440p, but clearly GPU-limited at 4K, particularly at higher settings presets.