Palworld

Palworld

AVERAGE FPS
77
good

This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 36 47 58
1440p QHD 49 65 84 104
1080p Full HD 75 98 128 158

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 58
3840x2160 Medium 47
3840x2160 High 36
3840x2160 Ultra 27
2560x1440 Low 104
2560x1440 Medium 84
2560x1440 High 65
2560x1440 Ultra 49
1920x1080 Low 158
1920x1080 Medium 128
1920x1080 High 98
1920x1080 Ultra 75

Palworld with AMD Ryzen 5 8400F + AMD Radeon RX 6650 XT, In-Depth Analysis

The AMD Ryzen 5 8400F paired with the AMD Radeon RX 6650 XT delivers measured performance in Palworld that spans a wide range depending on resolution and preset. Across 1080p, 1440p, and 4K, the combo produces average frame rates from 27 fps at 4K Ultra to 158 fps at 1080p Low, with a combination rank of 2417 out of 3711 tested CPU‑GPU pairings. This rank means the combo outperforms 1294 of the 3711 tested combinations and falls behind the remaining 2,417, placing it in the lower half of the database for Palworld. The data is measured, not extrapolated, and the following sections dissect what each number implies about the hardware interplay.

Settings Recommendations

Given the measured rows, the optimal preset depends heavily on the target resolution and whether the player prefers smoothness over image quality.

At 1920×1080, even the Ultra preset runs above 75 fps (avg 75), which is comfortably playable for most titles. The High preset shows 98 fps avg, leaving headroom for background tasks or recording. However, the Low preset reaches 158 fps, which is ideal for high‑refresh monitors if the user prioritizes speed over visual fidelity. Since the Medium preset sits at 128 fps and the Ultra at 75 fps, the best experience for a balanced 1080p session is High: it is only 15% slower than Medium (98 vs 128) yet still 23 fps above the Ultra result, and it retains the visual improvements over Low.

At 2560x1440, the Ultra preset drops to 49 fps, making it unsuitable for 60‑Hz displays. High provides 65 fps, which is just above the 60‑fps threshold but still leaves little margin for swift motion. The Medium preset delivers 84 fps, and Low hits 104 fps. For a smooth 60+ experience, Medium is the sweet spot because it nearly doubles Ultra’s frame rate (84 vs 49) and keeps the visual quality above Low. If a 144 Hz monitor is the goal, Low is the only choice that consistently sustains over 100 fps.

For 3840x2160, even Medium cannot maintain a 60 fps average (47 fps). The ideal setting is Low, which reaches 58 fps — the only 4K preset that approaches 60. High (36 fps) and Ultra (27 fps) are clearly below playable thresholds. Thus, for 4K, Low is the recommended preset; players who prioritize fidelity might accept Medium at 47 fps, but the data shows that Low keeps the experience close to playable.

In summary, the highest quality preset that stays above 60 fps is 1080p Ultra (75 fps), 1440p Medium (84 fps), and 4K Low (58 fps). For a target of 60 FPS, these are the upper bounds of what the hardware can sustain.

GPU Role

The AMD Radeon RX 6650 XT is based on the RDNA 2 architecture, featuring 8 GB of GDDR6 memory on a 128‑bit bus, with a memory bandwidth of 280.3 GB/s. Its base clock is 2055 MHz, boost clock reaches 2635 MHz, and the game clock is listed as 2410 MHz. The GPU has 2048 shading units, 128 texture units, and 64 ROPs, with 32 ray‑tracing cores. This specific silicon occupies the performance percentile of 65 among all GPUs in the database, and its average benchmark score is 19,765.

The GPU’s nearest rivals in the database are not gaming‑oriented cards: the NVIDIA Tesla K40m trails by 0.6% (average score 19,885), which the FirePro D300 is 0.7% ahead (19,637), and the FirePro W7000 is 0.7% behind (19,905). These are professional/compute parts, so the geomean performance of the RX 6650 XT is comparable to those legacy accelerators, but the card’s 8 GB VRAM is the primary constraint for high‑resolution textures.

In Palworld, the GPU is heavily dominant. When moving from 1080p to 4K at the same High preset, the average FPS drops from 98 to 36 — a 63% reduction. This indicates that as pixel count quadruples (2.07M to 8.29M), the GPU becomes the limiting component. The 8 GB VRAM is likely exhausted at 4K Ultra, causing the 27 fps result, but the card’s compute resources also struggle with the increased load. The intra‑frame minimums are only recorded for the Medium preset: at 1080p, the min is 109 fps with a max of 147; at 1440p, the min is 72 and max 97; at 4K, the min is 40 and max 54 — this shows a typical narrow spread on the GPU‑bound Medium setting, but the GPU still cannot hold a 60 fps floor at 4K.

The GPU’s memory interface—a 128‑bit bus with 8 GB—appears to be the limiting factor at 4K, where only Low stays playable. The 17.5 Gbps effective memory speed is adequate for 1080p and 1440p, but the frame rate scaling suggests that the GPU’s rasterization power (10.79 TFLOPS FP32) cannot overcome the raw pixel load at 4K.

Resolution Scaling

The resolution scaling of the AMD Ryzen 5 8400F + RX 6650 XT pair follows a predictable pattern. At the High preset, moving from 1080p (98 fps) to 1440p (65 fps) results in a 33% loss, while moving to 4K (36 fps) brings a 63% loss from 1080p. At the Low preset, 1080p (158 fps) becomes 104 fps at 1440p (34% – reality) and 58 fps at 4K (63% loss). The drop from 1440p to 4K is approximately 44% (65→36 for High, 104→58 for Low). This is an intuitively expected behavior: the GPU load scales with pixel count, but the CPU is not providing a ceiling until 1080p High and above.

The 1080p-to-1440p loss is relatively consistent across presets: 65 fps (High) is 66% of 98; 84 (Medium) is 64% of 128; 158 (Low) is 67% of 104? Wait: 1080 Low 158, 1440 Low 104, that's 65.8% . For Medium: 1080 128, 1440 84, ratio 65.6%. For Ultra: 1080 75, 1440 49, ratio 65.3%. So all presets show about 65% of the 1080p frame rate at 1440p. From 1440p to 4K, the ratio is: High 36/65=0.55, Low 58/104=0.56, Medium 47/84=0.56, Ultra 27/49=0.55. So the scaling from 1080 to 1440 is a 35% drop, while from 1440 to 4K it's a 45% drop. This indicates that the GPU is the dominant limiting factor above 1080p. However, the fact that the 1080p Low preset achieves 158 fps while 4K Low achieves 58 fps (48% of 1080p) suggests that the game engine’s CPU load is relatively low, or the Ryzen 8400F has enough single-thread throughput to keep up even at lower resolutions.

The measured minimums for the Medium preset (the only ones recorded) show that while the average FPS drops from 128 to 84 to 47 across the three resolutions, the min frame rate follows the same pattern (109 → 72 → 40) and the gap between min and max remains about 1.4x—suggesting no stutter or memory exhaustion beyond the expected scaling.

Measured FPS Breakdown

The complete set of measured average frame rates, along with the available min/max values, is as follows:

3840x2160 (4K)

  • Low: 58
  • Medium: 47 (min 40, max 54)
  • High: 36
  • Ultra: 27

2560x1440

  • Low: 104
  • Medium: 59 (min 72, max 97)
  • High: 65
  • Ultra: 49

1920x1080

  • Low: 158
  • Medium: 128 (min 109, max 147)
  • High: 98
  • Ultra: 75

Note that the Ultra preset is listed after High in the original pack; the ordering above follows the presets as recorded. The only preset that includes min/max are those with the Medium setting, clearly the benchmark run recorded the fullest frame time distribution for that preset. The 1080p numbers are all above the playable threshold, with even the Ultra preset hitting 75 fps. For 1440p, the Low and High are above 60, but Ultra doesn't reach 50. For 4K, only Low achieve a playable 55 fps; all others fall below 50, and Ultra plummets to 27 fps, which is not suitable for constant-action gameplay.

How This Combo Ranks

The combo has a rank of 2417 out of 3711 tested CPU‑GPU combinations. Interpreting this rank: there are 3,711 total combinations, and that with a rank of 2417, the performance is worse than 2,416 combos and better than 1,294 combos. In percentage terms, the Ryzen 8400F + RX 6650 XT outperforms about 34.9% of tested combos, meaning the other 65.1% produce higher average FPS in Palworld. This low‑middle placement is consistent with the components’ individual metrics: the CPU sits at the 77th percentile of all CPUs, while the GPU is at the 65th percentile of all GPUs; however, the combination’s poor rank (below both percentiles) suggests a CPU–GPU imbalance for this title. The CPU’s single‑thread and multi‑thread performance (Cinebench R23 multi 20,851, single 2,943) are strong, yet the GPU’s relative average 19,765 score is modest. The 2417 place indicates that pairing a mid‑range CPU with a mid‑range GPU yields a frame rate that is below the median of all tested combos in Palworld.

Interestingly, the CPU’s nearest rivals include the AMD Ryzen 5 7500F (delta 0.2%), Intel Core i7-11850H (0.3%), and i7-13620H (0.4%), but the GPU’s nearest rivals are legacy compute cards, illustrating that the GPU performance is not directly comparable to those—the GPU’s percentile is only 65. The combination’s rank is only better than the bottom one tier, so optimistically the performance is acceptably for 1080p and 1440p, but for 4K it is strictly entry‑level.

CPU Role

The AMD Ryzen 5 8400F is a desktop CPU with 6 cores and 12 threads, base clock 4.20 GHz, boost 4.70 GHz, and a 65 W TDP. It is built on 4 nm TSMC technology under the Zen 4 microarchitecture (codenamed Phoenix). It supports DDR5 memory dual‑channel with 83.2 GB/s bandwidth. The processor has an L3 cache of 16 MB shared. The benchmark data reveals its strength: in 3DMark single‑thread it scores 951, in Cinebench R23 it scores 2,943 single‑core and 20,851 multi‑core, and in PassMark it scores 3,685 single‑thread and 24,389 multithread. Its average benchmark score is 25,005, ranking 77th percentile of all CPUs.

In Palworld, the CPU load is moderate at lower resolutions. Compare the 1080p Low score of 158 fps with the 1440p Low of 104 fps and the 4K Low of 58 fps. The 1080p result saturates far above the 60‑frame target, indicating that the CPU is able to feed many frames when the GPU is not stressed. At 1080p, the Ultra preset yields 75 fps, which is still well above the 60, so the CPU is not the limiting factor even at highest settings. The observed 1440p Medium quality of 84 fps is close to the 1080p High of 98 fps, so the CPU's single‑thread performance (boost 4.7 GHz) avoids any large drop. The CPU’s boosting gives it a lead over its closest rivals as seen: the CPU is only 0.2% ahead or behind its nearest list of CPUs (Ryzen 7500F 0.2% delta, Core i7-11850H 0.3%, i7-13620H 0.4%, EPYC 9474F -0.4%). Therefore, the Ryzen 5 8400F is positioned as a competent mid‑tier chip, but its main contribution here is to preserve frame rates at un‑bound resolutions (1080p).

Given the game’s performance, CPU strain only shows when the GPU is not fully saturated—at 1080p Low. At that point the CPU allows a 158 fps average, which confirms a high single‑thread/throughput capability. In VR, the 233.2 bandwidth and 20 PCIe Gen4 lanes do not hinder data flow. Overall, the Ryzen 5 8400F is a bottle‑number equal partner; the more significant limitation is the GPU.

FAQ

Q: What is the average FPS at 1080p with the Low preset?

A: The measured average FPS at 1080p Low is 158.

Q: At which preset does the combo exceed 60 fps at 1440p?

A: The Medium preset delivers an average of 84 fps at the Medium High preset. Actually, the Ultra-only 49 fails; the High preset sits at 65 fps. So the High preset also exceeds 60; the Medium and Low are 84 and 104 respectively. The answer: Low, Medium, and High all average over 60 fps, while Ultra drops below 60.

Q: Are the only min/max frame times captured for the Medium preset?

A: Yes, the dataset includes min and max values only for the Medium preset at each resolution: 1080p (109–147), 1440p (72–97), and 4K (40–54). They show typical spike margins.

Q: How much faster is 1080p High compared to 4K High?

A: 1080p High averages 98 fps; 4K High averages 36 fps, which is a 63% drop (98→36). The exact difference is 62 fps difference.

Q: Does the CPU’s strong performance translate into a high global ranking?

A: No. The CPU ranks at the 77th percentile and the GPU at the 65th, but the combination ranks can be ranked only at its own 2417 out of 3711, meaning 68% of combos perform better.

Q: What likely push limits at 4K Low?

A: At 4K Low frame rate reaches 58 fps, close to 60, indicating the GPU’s 8 GB VRAM and 280.3 GB/s bandwidth is the main limiting factor at this ultra‑pixel resolution.

Hardware Specifications

AMD Ryzen 5 8400F

Cores / Threads 6 / 12
Base Clock 4200 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 6650 XT

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2635 MHz MHz
TDP 176 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 8400F + AMD Radeon RX 6650 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 58.0
3840x2160 Medium 47.0
3840x2160 High 36.0
3840x2160 Ultra 27.0
2560x1440 Low 104.0
2560x1440 Medium 84.0
2560x1440 High 65.0
2560x1440 Ultra 49.0
1920x1080 Low 158.0
1920x1080 Medium 128.0
1920x1080 High 98.0
1920x1080 Ultra 75.0

Palworld with Ryzen 5 8400F + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 6650 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 8400F + RX 6650 XT

Explore FPS benchmarks for other games using this same hardware combination.