Palworld

Palworld

AVERAGE FPS
75
good

This combination provides smooth gameplay with an average of 75 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 56 60 96
1440p QHD 54 65 70 113
1080p Full HD 61 73 79 126

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 96
3840x2160 Medium 60
3840x2160 High 56
3840x2160 Ultra 46
2560x1440 Low 113
2560x1440 Medium 70
2560x1440 High 65
2560x1440 Ultra 54
1920x1080 Low 126
1920x1080 Medium 79
1920x1080 High 73
1920x1080 Ultra 61

Palworld with AMD Ryzen 5 7600 + AMD Radeon RX 5700 XT, In-Depth Analysis

The AMD Ryzen 5 7600 paired with the AMD Radeon RX 5700 XT produces a set of Palworld results that clearly illustrate where the performance ceiling lies for this combination. Across all measured settings, the data indicates a system that is firmly GPU-bound at higher resolutions, with the CPU only becoming a relevant factor at 1080p. The following analysis breaks down the measured frame rates, scaling behavior, and component roles based exclusively on the provided dataset.

Resolution Scaling

The frame rate progression from 1920x1080 to 3840x2160 reveals a textbook case of GPU-limited scaling. At High settings, the average frame rate drops from 73 FPS at 1080p to 65 FPS at 1440p, then further to 56 FPS at 4K. This represents a 23% reduction in performance from 1080p to 4K, which is a relatively modest decline compared to what a purely GPU-bound scenario would typically show. The RX 5700 XT, with its 8 GB of GDDR6 memory on a 256-bit bus, is clearly the constraining factor as pixel count increases.

The Low preset tells a more interesting story. At 1080p Low, the system achieves 126 FPS, which drops to 113 FPS at 1440p and 96 FPS at 4K. The 4K Low result being only 24% lower than the 1080p Low result suggests that even at the lowest settings, the GPU is still the primary bottleneck. However, the gap between Low and Medium at 1080p (126 vs 79 FPS) is substantial, indicating that the Medium preset introduces enough additional GPU workload to significantly impact frame rates.

Examining the scaling ratios more closely, the 4K to 1080p performance ratio is remarkably consistent across presets: 0.77 for High (56/73), 0.76 for Low (96/126), and 0.76 for Medium (60/79). This uniformity strongly suggests that resolution scaling is purely a function of GPU rasterization throughput, with no CPU limitation emerging even at 1080p. The Ultra preset follows the same pattern, with 61 FPS at 1080p dropping to 54 FPS at 1440p and 46 FPS at 4K.

The data shows that the Ryzen 5 7600's six Zen 4 cores are never the limiting factor in this game. Even at 1080p Low, where the CPU would have the best chance to become a bottleneck, the system still delivers 126 FPS. The 3DMark single-thread score of 999 and multi-thread scores up to 6503 indicate a processor with ample headroom for Palworld's threading model. The consistent frame rates across resolutions point to the RX 5700 XT's 9.754 TFLOPS of FP32 compute and 448.0 GB/s of memory bandwidth as the definitive performance ceiling.

Settings Recommendations

The measured data provides clear guidance on which preset offers the optimal balance between visual quality and frame rate for this hardware combination. At 1080p, the Medium preset delivers 79 FPS average with a minimum of 67 FPS and maximum of 91 FPS. This provides a smooth experience that stays well above typical 60 FPS thresholds while offering better visual fidelity than Low. The jump from Low to Medium at 1080p costs 47 FPS (from 126 to 79), which is a significant trade-off, but the resulting 79 FPS average remains highly playable.

At 1440p, the Medium preset again proves to be the sweet spot, producing 70 FPS average with a minimum of 60 FPS and maximum of 81 FPS. This is particularly notable because the minimum frame rate of exactly 60 FPS indicates that the system can hold a stable 60 FPS experience at this resolution and settings combination. The High preset at 1440p drops to 65 FPS average, which is still playable but leaves less headroom for demanding scenes. The Ultra preset at 1440p falls to 54 FPS, which may be acceptable for some players but falls below the 60 FPS threshold.

For 4K gaming, the data suggests that only the Low preset provides a comfortable experience, with 96 FPS average. The Medium preset at 4K produces 60 FPS average but with a minimum of 51 FPS, indicating that frame pacing could become inconsistent during intense gameplay moments. The High preset at 4K averages 56 FPS, while Ultra drops to 46 FPS. Given these numbers, 4K players should either accept Low settings for consistent performance or use Medium with the understanding that some scenes will dip below 60 FPS.

The Ultra preset appears to be the least efficient choice across all resolutions. At 1080p Ultra, the system produces 61 FPS, which is only 22% lower than High but likely offers diminishing visual returns. The gap between Medium and Ultra at 1080p is 18 FPS (79 vs 61), while the gap between Low and Medium is 47 FPS. This non-linear scaling suggests that the Ultra preset imposes significant additional GPU load without a proportional frame rate penalty relative to High.

How This Combo Ranks

The combination of the Ryzen 5 7600 and RX 5700 XT achieves a rank of 2549 out of 3711 tested combinations in Palworld. This places the system in the lower third of all tested configurations, which is consistent with the RX 5700 XT being an older, end-of-life GPU. The GPU's percentile ranking of 59 among all GPUs indicates that it performs better than the median but is far from top-tier hardware.

The CPU component of this combo, however, is significantly stronger. The Ryzen 5 7600 ranks in the 78th percentile among all CPUs, with an average benchmark score of 26324. Its nearest rivals include the AMD Ryzen 9 6900HX (0.2% higher score), AMD Ryzen 7 7435HS (0.3% lower), Intel Core i9-11900KF (0.4% higher), and AMD Ryzen 5 8540U (0.5% higher). These extremely small deltas indicate that the 7600 is well-matched against these alternatives, but none of these CPUs would meaningfully change Palworld performance given the GPU bottleneck.

The GPU's nearest rivals in the benchmark database include the AMD Radeon Pro 5600M (0.1% higher), NVIDIA RTX PRO 6000 Blackwell (0.3% lower), AMD Radeon PRO W7500 (0.3% lower), and NVIDIA GeForce RTX 5090 D V2 (0.9% lower). These comparisons are interesting because they show the RX 5700 XT performing within 1% of much newer and more expensive GPUs in synthetic benchmarks, though the Palworld results may differ due to driver optimization and game-specific factors.

The rank of 2549 out of 3711 suggests that this combo is roughly in the 31st percentile for Palworld specifically. This is notably lower than the GPU's 59th percentile and the CPU's 78th percentile, indicating that Palworld is particularly demanding on the GPU relative to other workloads. The game's open-world survival genre with many simultaneous entities likely stresses the rasterization pipeline more than typical benchmarks.

Measured FPS Breakdown

At 1920x1080, the full range of settings produces the following average frame rates: Low delivers 126 FPS, Medium delivers 79 FPS (minimum 67, maximum 91), High delivers 73 FPS, and Ultra delivers 61 FPS. The 1080p results show a clear hierarchy where each step up in settings costs approximately 15-47 FPS. The largest single drop occurs between Low and Medium, suggesting that the Medium preset introduces significant additional rendering features that heavily impact the RX 5700 XT.

Moving to 2560x1440, the measured averages are: Low at 113 FPS, Medium at 70 FPS (minimum 60, maximum 81), High at 65 FPS, and Ultra at 54 FPS. The 1440p results maintain the same relative ordering as 1080p but with compressed differences between presets. The gap between Low and Medium narrows to 43 FPS, while the gap between Medium and High is only 5 FPS, and between High and Ultra is 11 FPS. This compression indicates that at higher resolutions, the GPU is becoming saturated even at lower settings.

At 3840x2160, the results are: Low at 96 FPS, Medium at 60 FPS (minimum 51, maximum 69), High at 56 FPS, and Ultra at 46 FPS. The 4K results show the most dramatic compression between presets, with only 4 FPS separating Medium and High. The 4K Medium minimum of 51 FPS is particularly noteworthy as it represents the lowest minimum frame rate recorded across all tested configurations, indicating that this setting/resolution combination can experience noticeable stuttering during demanding scenes.

The complete dataset shows that the RX 5700 XT can deliver playable frame rates at all tested resolutions, but only at Low settings for 4K. For 1440p, Medium settings provide a comfortable 70 FPS average with a 60 FPS minimum. At 1080p, even Ultra settings maintain 61 FPS average, though players seeking higher refresh rates would need to drop to Low or Medium settings.

GPU Role

The AMD Radeon RX 5700 XT, built on the RDNA 1.0 architecture with the Navi 10 chip, is the definitive performance limiter in this Palworld configuration. Its 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is adequate for 1080p and 1440p gaming but becomes strained at 4K. The GPU's 2560 shading units and 64 ROPs deliver a pixel rate of 121.9 GPixel/s and a texture rate of 304.8 GTexel/s, which directly impacts how quickly the game can fill the screen with rendered geometry and textures.

The clock speeds of 1605 MHz base, 1755 MHz game, and 1905 MHz boost show that the GPU operates within a typical range for this architecture. The boost clock of 1905 MHz is 18.7% higher than the base clock, indicating that the GPU can dynamically increase its performance when thermal and power headroom allow. The 225 W TDP and suggested 550 W PSU requirement position this as a power-hungry card, but the measured frame rates suggest that power delivery is not a limiting factor in Palworld.

The 7 nm process node from TSMC, with 10,300 million transistors on a 251 mm² die, represents the first generation of RDNA architecture. This older design shows its age in Palworld's demanding rendering workload. The FP32 compute of 9.754 TFLOPS is modest by modern standards, and the lack of dedicated ray tracing cores means that any RT features would fall back to compute shaders, though Palworld does not appear to require such features based on the measured data.

The GPU's VRAM capacity of 8 GB is sufficient for the tested settings, as evidenced by the consistent frame rates across settings presets. However, the 4K Medium result with a 51 FPS minimum suggests that memory bandwidth may be contributing to the performance ceiling at higher resolutions. The 448.0 GB/s bandwidth is shared across all rendering tasks, and Palworld's open-world nature with many draw calls likely stresses this resource.

CPU Role

The AMD Ryzen 5 7600 provides ample computational headroom for Palworld, with its six Zen 4 cores and twelve threads operating at base and boost clocks of 3.80 GHz and 5.10 GHz respectively. The CPU's benchmark results confirm its capability: a Cinebench R23 multi-core score of 12735 and single-core score of 1852, along with a Geekbench multi-core score of 13413 and single-core score of 2521. These numbers indicate strong per-core performance that is well-suited for game logic and physics calculations.

The 32 MB of shared L3 cache, along with 64 KB L1 and 1 MB L2 per core, provides the low-latency memory access that game engines require. The DDR5 memory support with dual-channel configuration and 83.2 GB/s bandwidth ensures that the CPU can feed data to the GPU without creating a bottleneck. The 5 nm process node from TSMC, with 6,570 million transistors on a 71 mm² die, represents a modern, efficient design that maintains high clock speeds without excessive power draw (65 W TDP).

In Palworld specifically, the CPU's role appears to be secondary to the GPU. The measured frame rates show consistent scaling with resolution and settings, which would not occur if the CPU were a limiting factor. Even at 1080p Low (126 FPS), the system is likely GPU-bound, as the CPU's single-thread score of 999 in 3DMark and PassMark single-thread score of 3910 indicate it can handle frame generation well above the measured rates.

The CPU's benchmark comparisons show it performing within 0.5% of its nearest rivals, including the AMD Ryzen 9 6900HX, AMD Ryzen 7 7435HS, Intel Core i9-11900KF, and AMD Ryzen 5 8540U. This tight clustering in synthetic benchmarks suggests that any of these alternatives would produce nearly identical Palworld results when paired with the RX 5700 XT, further confirming the GPU as the performance bottleneck.

FAQ

Q: What is the best resolution and settings combination for this hardware in Palworld?

A: Based on the measured data, 2560x1440 with Medium settings provides the best balance, delivering 70 FPS average with a 60 FPS minimum and 81 FPS maximum. This stays above the 60 FPS threshold while offering better visual quality than Low settings.

Q: Can this combo handle 4K gaming in Palworld?

A: Yes, but only at Low settings, which produces 96 FPS average. At Medium settings, the 4K average drops to 60 FPS with a 51 FPS minimum, which may cause noticeable stuttering. High and Ultra settings at 4K produce 56 FPS and 46 FPS respectively.

Q: Is the CPU or GPU the bottleneck in this system for Palworld?

A: The GPU is the definitive bottleneck. The frame rates scale consistently with resolution and settings changes, with no evidence of CPU limitation even at 1080p Low (126 FPS). The CPU's benchmark scores are far higher than what Palworld requires for the measured frame rates.

Q: How does the RX 5700 XT compare to its nearest rivals in synthetic benchmarks?

A: The RX 5700 XT scores 16361 on average, which is within 0.9% of its nearest rivals: AMD Radeon Pro 5600M (0.1% higher), NVIDIA RTX PRO 6000 Blackwell (0.3% lower), AMD Radeon PRO W7500 (0.3% lower), and NVIDIA GeForce RTX 5090 D V2 (0.9% lower). These small differences in synthetic tests may not translate to identical Palworld performance due to driver and game-specific optimizations.

Q: What frame rates can be expected at 1080p with Ultra settings?

A: The system produces an average of 61 FPS at 1080p Ultra, which is 12 FPS lower than High settings (73 FPS) and 18 FPS lower than Medium settings (79 FPS). This suggests that Ultra may not be worth the performance cost for most players.

Q: Does the 8 GB VRAM on the RX 5700 XT limit performance in Palworld?

A: The measured data does not show VRAM capacity as a limiting factor, since the frame rates drop consistently with resolution increases. However, the 4K Medium minimum of 51 FPS suggests that memory bandwidth (448.0 GB/s) may contribute to performance degradation at higher resolutions.

Hardware Specifications

AMD Ryzen 5 7600

Cores / Threads 6 / 12
Base Clock 3800 MHz
Boost Clock 5100 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 5700 XT

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1905 MHz MHz
TDP 225 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7600 + AMD Radeon RX 5700 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 96.0
3840x2160 Medium 60.0
3840x2160 High 56.0
3840x2160 Ultra 46.0
2560x1440 Low 113.0
2560x1440 Medium 70.0
2560x1440 High 65.0
2560x1440 Ultra 54.0
1920x1080 Low 126.0
1920x1080 Medium 79.0
1920x1080 High 73.0
1920x1080 Ultra 61.0

Palworld with Ryzen 5 7600 + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 5700 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 7600 + RX 5700 XT

Explore FPS benchmarks for other games using this same hardware combination.