Palworld

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4070 SUPER pairing delivers a robust Palworld experience, with the benchmark data revealing a clear hierarchy across its four settings presets. For the majority of users, the Medium preset offers the most compelling balance between visual fidelity and frame rate. At 1920x1080, Medium produces 226.1 FPS, which is a substantial 93.2 FPS advantage over High while remaining visually richer than Low. This trend continues at 2560x1440, where Medium achieves 145.4 FPS, and even at 3840x2160 it maintains a playable 80.3 FPS. While High is certainly viable, the performance cost is steep; the data shows a 55 FPS drop at 1080p when moving from Medium to High, a sacrifice that may not be justifiable given the marginal visual gains typical of that step. Ultra is the most demanding, yielding 132.9 FPS at 1080p and 48.5 FPS at 4K, which is below the 60 FPS threshold many consider the baseline for smooth gameplay. Therefore, Medium stands out as the optimal preset for a consistent, high-refresh-rate experience across all resolutions, with High serving as a viable option for those who prioritize visual quality at 1440p or 1080p.

GPU Role

The NVIDIA GeForce RTX 4070 SUPER is the primary driver of Palworld's visual output, and its specifications directly correlate with the measured performance. The GPU's 12 GB of GDDR6X memory, paired with a 192-bit bus width and 504.2 GB/s of bandwidth, provides ample headroom for the game's expansive world and texture data. This is evident in the scaling from Medium to High settings, where the increased memory and bandwidth demands are met without catastrophic frame rate drops. The card's Ada Lovelace architecture, built on a 5 nm process, features 7,168 shading units and 80 ROPs, which are crucial for the rasterization-heavy rendering Palworld employs. The boost clock of 2475 MHz, up from a base of 1980 MHz, allows the GPU to dynamically increase its throughput under load, which is reflected in the high frame rates observed at lower resolutions.

The GPU's benchmark profile further contextualizes its performance. With a PassMark G3D score of 29,995, it sits in the 84th percentile of all GPUs, indicating strong overall capability. Its average benchmark score of 42,576 places it in close competition with the NVIDIA RTX A6000 (deltaPct of -0.2) and the AMD Radeon RX 7650 GRE (deltaPct of -0.3), showing that the 4070 SUPER is a high-tier performer. However, the data suggests that Palworld is not a pure GPU stress test at all settings. The substantial frame rate differences between 1080p and 4K at the same preset (e.g., 226.1 FPS to 80.3 FPS on Medium) indicate that the GPU's fill rate and memory bandwidth become increasingly critical at higher resolutions. At 4K Ultra, the GPU is clearly the limiting factor, as the 48.5 FPS result suggests it is struggling to maintain the high pixel throughput required.

How This Combo Ranks

In the broader context of tested hardware configurations for Palworld, this specific combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4070 SUPER holds a strong position. The data shows a combo rank of 291 out of 1,718 tested combos, placing it in the top 17% of all systems. This is a notable achievement, indicating that the pairing is well-balanced and capable of delivering a high-performance experience in this title. The rank reflects the synergy between the CPU and GPU, where neither component is a significant bottleneck for the other at most settings. The CPU's strong single-threaded performance, evidenced by a Geekbench single-core score of 2,759, is sufficient to feed the GPU's frame generation capabilities, especially at 1080p where the frame rates are exceptionally high.

The rank of 291 becomes more telling when considering the CPU's own benchmark standing. The Ryzen 5 7500F has an average benchmark score of 24,993 and sits in the 82nd percentile of all CPUs. Its nearest rivals, such as the Intel Core i7-11850H (deltaPct of 0.1) and AMD Ryzen 7 2700X (deltaPct of -0.3), have nearly identical average scores, suggesting the CPU is a mid-to-high-tier performer. Yet, the combo's rank in Palworld is much higher relative to its CPU percentile. This implies that Palworld is more dependent on the GPU than the CPU, allowing the powerful RTX 4070 SUPER to boost the overall system ranking. The 1,718 total combos tested provide a vast field, and being in the top 291 reflects the GPU's strength in this specific gaming workload.

Measured FPS Breakdown

The measured FPS data provides a granular look at performance across all resolutions and settings. At 1920x1080, the system is clearly GPU-bound at higher settings but shows immense headroom. The Low preset achieves a staggering 278.5 FPS, which is excellent for high-refresh-rate monitors. Medium drops to 226.1 FPS, a 52.4 FPS reduction, while High comes in at 171.1 FPS. The Ultra preset yields 132.9 FPS, which is still very playable but represents a 54.4% decrease from Low. At 2560x1440, the same pattern holds. Low produces 183.9 FPS, Medium drops to 145.4 FPS, and High is at 114.8 FPS. Ultra is the only setting that falls below 100 FPS, averaging 83.6 FPS. This resolution is likely the sweet spot for this combo, offering high frame rates on High settings that are well above the 60 FPS standard.

At 3840x2160, the GPU's workload becomes significantly heavier. The Low preset manages 104 FPS, which is still smooth, but Medium drops to 80.3 FPS and High to 64.5 FPS. The Ultra preset falls to 48.5 FPS, which is below the 60 FPS threshold and may result in noticeable stutter for some players. The data reveals a consistent performance hierarchy: Low > Medium > High > Ultra at every resolution. The delta between each preset is also consistent, with Medium being roughly 20-25% faster than High, and High being roughly 25-30% faster than Ultra. This linear scaling suggests that the game's settings have a predictable impact on the GPU's rendering load, with Ultra imposing a particularly heavy penalty that only the most powerful GPUs could handle at 4K.

Resolution Scaling

The transition from 1080p to 4K illustrates the growing burden on the GPU and clarifies the role of each component. At the High preset, the average FPS drops from 171.1 at 1080p to 114.8 at 1440p, a 32.9% decrease, and then to 64.5 at 4K, an additional 43.8% decrease from 1440p. This steep decline is characteristic of a GPU-limited scenario, as the number of pixels being rendered quadruples from 1080p to 4K. The RTX 4070 SUPER's 12 GB of VRAM and 504.2 GB/s of bandwidth are sufficient for 1440p High, but the 4K resolution pushes the GPU's pixel fill rate to its limits, resulting in the sub-60 FPS figure.

For the Low preset, the scaling is less severe but still significant. The FPS drops from 278.5 at 1080p to 183.9 at 1440p, a 34.0% decrease, and then to 104 at 4K, a 43.4% decrease from 1440p. This suggests that even at Low settings, the GPU is the limiting factor at 4K, as the CPU's 6 cores and 12 threads are not being fully taxed. The data implies that the Ryzen 5 7500F is more than capable of handling the game's logic at 1080p, as evidenced by the 278.5 FPS result, but the GPU cannot maintain that frame rate as the resolution increases. The resolution scaling analysis points to a classic GPU-bound scenario at 4K, where the RTX 4070 SUPER is the primary constraint, while at 1080p, the system is balanced enough to allow the CPU to shine.

CPU Role

The AMD Ryzen 5 7500F serves as a capable foundation for this gaming system, and its specifications align with the measured performance. With 6 cores and 12 threads based on the Zen 4 architecture, it offers a base clock of 3.70 GHz and a boost clock of 5.00 GHz. This high boost clock is critical for gaming, as it provides the single-threaded performance that many titles, including Palworld, rely on. The CPU's Geekbench single-core score of 2,759 and Cinebench R23 single-core score of 3,218 indicate strong per-core capability, which is essential for maintaining high frame rates in scenarios where the GPU is not the bottleneck. The 32 MB of shared L3 cache also helps reduce memory latency, which can be beneficial for game logic and asset streaming.

The CPU's multi-threaded performance is also robust, with a Cinebench R23 multi-core score of 22,799 and a 3DMark max-thread score of 6,379. This ensures that the CPU can handle background tasks and the game's more complex simulations without causing frame drops. The data shows that at 1080p Low, the system achieves 278.5 FPS, which is an exceptionally high number that suggests the CPU is not holding the GPU back. The CPU's percentile ranking of 82 and its average benchmark score of 24,993 place it in the upper echelon of processors, and its nearest rival, the AMD Ryzen 5 8400F, is just 0.3% behind. This indicates that the 7500F is a well-optimized gaming CPU that provides ample headroom for the RTX 4070 SUPER, ensuring that the GPU is the primary driver of frame rates in most Palworld scenarios.

FAQ

Q: What is the best settings preset for a smooth 60 FPS experience at 3840x2160?

A: The High preset at 3840x2160 achieves an average of 64.5 FPS, which is above the 60 FPS threshold. The Medium preset offers more headroom at 80.3 FPS, while the Ultra preset falls below 60 FPS at 48.5 FPS.

Q: How does this combo's rank in Palworld compare to its overall hardware percentiles?

A: The combo ranks 291 out of 1,718 tested combos, placing it in the top 17%. This is notably higher than the CPU's 82nd percentile ranking, indicating that the GPU is the primary driver of the system's high performance in this game.

Q: Is the CPU or GPU the limiting factor at 1920x1080 with the Low preset?

A: The data shows 278.5 FPS at 1080p Low, suggesting the system is well-balanced. The CPU's strong single-threaded performance is likely sufficient to feed the GPU, and neither component is a significant bottleneck at this setting.

Q: What is the performance difference between the High and Ultra presets at 2560x1440?

A: At 2560x1440, the High preset averages 114.8 FPS, while the Ultra preset averages 83.6 FPS. This represents a 31.2 FPS difference, or a 27.2% performance reduction when moving from High to Ultra.

Q: How much faster is the Low preset compared to the Ultra preset at 1080p?

A: The Low preset at 1080p achieves 278.5 FPS, while Ultra achieves 132.9 FPS. The Low preset is 145.6 FPS faster, which is a 109.6% increase in performance.

Q: Does the GPU's VRAM capacity appear sufficient for the highest settings?

A: The RTX 4070 SUPER has 12 GB of GDDR6X memory. The data shows that the Ultra preset at 4K drops to 48.5 FPS, indicating that the GPU's processing power, rather than VRAM capacity, is likely the limiting factor at that extreme setting.