Palworld

The AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4070 combination delivers a wide performance envelope in Palworld, scaling from highly competitive 1080p gaming to a playable yet demanding 4K experience. The data reveals a system where the GPU's capabilities are the primary driver at higher resolutions, while the CPU's 6-core/12-thread configuration becomes increasingly relevant as resolution drops. This analysis breaks down the measured FPS across all settings and resolutions, contextualizes the results against rival components, and explains the role each part plays in this specific title.

Resolution Scaling

The measured FPS data for Palworld shows a clear and consistent pattern of performance degradation as resolution increases, but the magnitude of that drop varies significantly depending on the quality preset. At Low settings, the transition from 1920x1080 to 2560x1440 sees average FPS fall from 247.3 to 161.3, a reduction of 86 FPS. Moving from 2560x1440 to 3840x2160 at Low settings further reduces the average to 87.4 FPS. This indicates that at Low settings and 1080p, the combination is heavily CPU-limited, as the RTX 4070 has ample headroom to render frames far faster than the Ryzen 5 5500 can feed it.

The scaling behavior changes character when moving to higher quality presets. At Ultra settings, the average FPS drops from 117.2 at 1920x1080 to 75.6 at 2560x1440, and finally to 40.7 at 3840x2160. The percentage drop from 1080p to 4K at Ultra is steeper than at Low, suggesting that the workload is shifting from a CPU-bound scenario to a GPU-bound one. The RTX 4070’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are being taxed more heavily at 4K, especially with the increased shading and texture demands of the Ultra preset.

At High settings, the system produces 154.6 FPS at 1080p, 100.3 FPS at 1440p, and 53.8 FPS at 4K. This represents a 65% drop in performance from 1080p to 4K. In contrast, the Low preset only sees a 65% drop as well, but the absolute numbers are much higher. The key takeaway is that the limiting component changes across the resolution spectrum. At 1080p, the Ryzen 5 5500, with its 3.60 GHz base and 4.20 GHz boost clock, is the bottleneck, preventing the system from reaching even higher frame rates. At 4K, the RTX 4070 becomes the primary constraint, with the data showing that even the Medium preset (71.4 FPS) can only achieve just over half the frame rate of the Low preset (87.4 FPS) at that resolution.

FAQ

Q: What is the highest average frame rate this combination can achieve in Palworld?

A: The highest measured average FPS is 247.3, recorded at 1920x1080 resolution with the Low settings preset.

Q: How does the RTX 4070’s performance in Palworld compare to its closest rivals?

A: The GPU’s average benchmark score is 37283, placing it 0.6% behind the AMD Radeon RX Vega 56 (score 37507) and 2.5% ahead of the AMD Radeon RX 5300M (score 36371). It also trails the NVIDIA GeForce RTX 4080 Mobile by 2.2%.

Q: Is the Ryzen 5 5500 a bottleneck for the RTX 4070 in this game?

A: Yes, particularly at lower resolutions. At 1080p Low, the system hits 247.3 FPS, which is a high number but likely limited by the CPU’s 6 cores and 12 threads. The CPU’s benchmark scores, such as a Cinebench R23 multi-core score of 16429, indicate its processing limits are reached before the GPU’s full potential is utilized.

Q: What is the playable 4K experience like for this combo?

A: At 3840x2160, the system achieves 53.8 FPS on High settings and 40.7 FPS on Ultra. For a smoother experience, dropping to Medium yields 71.4 FPS, while Low settings provide 87.4 FPS.

Q: How does this specific CPU+GPU combo rank among all tested combinations?

A: The combo ranks 492nd out of 1718 tested combinations in Palworld, placing it in the upper third of all systems tested.

Q: What are the CPU's key specifications for gaming?

A: The AMD Ryzen 5 5500 features 6 cores and 12 threads with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. It has 16 MB of L3 cache and supports DDR4 memory with a dual-channel bus.

CPU Role

The AMD Ryzen 5 5500 is a 6-core, 12-thread processor based on the Zen 3 architecture, manufactured on a 7 nm process. Its role in Palworld is to handle game logic, AI, and physics, which are tasks that scale with thread count and clock speed. The processor’s 3.60 GHz base clock and 4.20 GHz boost clock provide the raw speed for single-threaded performance, reflected in its Cinebench R23 single-core score of 2319. Its multi-threaded capability is demonstrated by a Cinebench R23 multi-core score of 16429, which is essential for the many simultaneous calculations a survival game like Palworld requires.

Benchmark results indicate that the CPU’s performance is nearly identical to its closest rivals. Its average benchmark score of 20875 is only 0.1% lower than the Intel Core i5-12500 and the AMD Ryzen 5 PRO 4655GE, and 0.1% higher than the AMD EPYC 7J13. This suggests that in CPU-bound scenarios, the Ryzen 5 5500 will perform on par with these alternatives. The data shows that the CPU’s impact on Palworld’s frame rate is most pronounced at 1080p. The gap between Low (247.3 FPS) and Ultra (117.2 FPS) settings at this resolution is 130 FPS, which is a much larger absolute difference than the 46.7 FPS gap seen at 4K. This indicates that at 1080p, the CPU is working to its limit to issue draw calls and process game state, and the GPU is often waiting for the next frame.

The CPU’s memory bandwidth of 51.2 GB/s, paired with DDR4 support, is a standard configuration for its generation. While not a bottleneck itself, the platform’s PCIe Gen 3 interface is an older standard. However, the RTX 4070’s PCIe 4.0 x16 interface is backward compatible, and the benchmark results in Palworld do not indicate that this is a limiting factor. The processor’s 65 W TDP classifies it as a power-efficient part, allowing for a wide range of cooling solutions. For Palworld, the data shows that the CPU is a capable partner for the RTX 4070, but it is the component that prevents the system from achieving even higher frame rates at 1080p.

How This Combo Ranks

In the comprehensive database of tested hardware combinations, this pairing of the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4070 achieves a rank of 492 out of 1718 combinations in Palworld. This places the system in the 71st percentile, meaning it outperforms the majority of other tested setups. This ranking is a reflection of the balance between the two components. The RTX 4070 is a high-end GPU, as indicated by its 81st percentile ranking among all GPUs, while the Ryzen 5 5500 is a solid mid-range CPU, ranking in the 79th percentile among all CPUs.

The combination’s rank is not at the very top due to the CPU’s limitations in highly CPU-intensive scenarios. The GPU’s nearest rival data shows it is competitive with other high-end cards, but the CPU’s performance, while close to its peers, does not push the system into the top tier. The 492nd rank out of 1718 combos suggests that while the RTX 4070 can drive high frame rates, the Ryzen 5 5500 holds it back from matching the absolute best systems, particularly at lower resolutions. However, the ranking also demonstrates that this is a well-matched pairing for high-refresh-rate 1440p gaming and solid 4K performance, as the FPS data across all resolutions and settings remains strong.

This rank is a holistic measure. It considers the entire range of resolutions and settings tested. The system’s ability to deliver 100.3 FPS at 1440p High and 154.6 FPS at 1080p High shows that it is not just a low-settings performer. The strong showing at these mainstream settings is likely what propels it to the 492nd position. The data suggests that for a user prioritizing high frame rates at 1080p and 1440p, this combo is a strong contender, while for 4K gaming, it offers a playable experience with adjustments to settings.

Measured FPS Breakdown

The following data represents the measured average FPS for the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4070 combination in Palworld, across all tested resolutions and settings.

1920x1080:

• Low: 247.3 FPS. This is the highest frame rate recorded for this combo, indicating a CPU-bound scenario where the GPU has significant headroom.
• Medium: 202.9 FPS. A substantial drop from Low, but still an exceptionally high frame rate, well beyond the refresh rate of most monitors.
• High: 154.6 FPS. This is a typical target for high-refresh-rate gaming, providing smooth gameplay with improved visual fidelity.
• Ultra: 117.2 FPS. The most demanding preset at this resolution, but still comfortably above 100 FPS, showing the system’s strength.

2560x1440:

• Low: 161.3 FPS. A significant reduction from the 1080p Low result, showing the GPU is now taking on more work.
• Medium: 131.5 FPS. This remains an excellent result for 1440p, offering high frame rates with medium quality settings.
• High: 100.3 FPS. This is a key metric for 1440p gaming, hitting the 100 FPS mark that is ideal for competitive and fast-paced play.
• Ultra: 75.6 FPS. This is still a very playable frame rate, providing a high-quality visual experience without dropping below the 60 FPS threshold.

3840x2160:

• Low: 87.4 FPS. The system proves capable of high refresh rates even at 4K when settings are lowered, making it a viable option for performance-focused play.
• Medium: 71.4 FPS. A good balance between visual quality and performance, this is a solid target for a smooth 4K experience.
• High: 53.8 FPS. This falls below the 60 FPS standard, requiring a slight compromise on settings or acceptance of a lower frame rate for higher fidelity.
• Ultra: 40.7 FPS. The most demanding configuration tested, this result shows the limit of the combo’s 4K capabilities on maximum settings, dipping below the 60 FPS target.