Outriders

The Core i7-14700F and Radeon RX 7600 XT combination produces a clear performance hierarchy in Outriders, with the measured data showing a consistent and predictable drop in frame rates as resolution increases. At 1080p, the system delivers exceptionally high frame rates across all settings, ranging from 86 FPS at Ultra to 217 FPS at Low, indicating that the CPU and GPU have ample headroom to push well beyond standard display refresh rates. Moving to 1440p, the average frame rates remain strong, with the High preset still achieving 75 FPS and Low reaching 137 FPS, while the Ultra preset drops to 54 FPS. At 4K, the performance curve steepens dramatically; the High preset manages only 39 FPS, Medium hits 52 FPS, and Ultra falls to 28 FPS, while the Low preset remains playable at 72 FPS. This pattern suggests that at 4K, the rendering load shifts heavily onto the GPU, which is the limiting component at that resolution, whereas at 1080p, the high frame rates across all presets indicate the CPU is more than capable of feeding the graphics card.

Resolution Scaling

The measured FPS data for Outriders reveals a predictable inverse relationship between resolution and frame rate, but the magnitude of the drop varies significantly depending on the graphics preset. When using the High preset, the average frame rate falls from 118 FPS at 1080p to 75 FPS at 1440p, a reduction of 43 FPS, and then further to 39 FPS at 4K, which represents a 79 FPS total decrease from the 1080p baseline. This scaling indicates that the GPU is becoming progressively more strained as pixel count increases, with the 4K result showing less than half the performance of 1080p. The Low preset follows a similar trend, starting at 217 FPS at 1080p, dropping to 137 FPS at 1440p, and reaching 72 FPS at 4K; the relative drop from 1080p to 4K is 145 FPS, which is a larger absolute gap but a smaller percentage drop compared to High. The Medium preset, which is the only one with recorded minimum and maximum frame times, shows an average of 158 FPS at 1080p, 100 FPS at 1440p, and 52 FPS at 4K, with the min/max range narrowing from 134–182 FPS at 1080p to 44–60 FPS at 4K, indicating increased frame time consistency at lower resolutions.

The Ultra preset exhibits the steepest decline, with averages of 86 FPS at 1080p, 54 FPS at 1440p, and 28 FPS at 4K. This scaling behavior suggests that at 1080p, the system is not fully GPU-bound, as even the Ultra preset maintains an average above 60 FPS, which is typically the minimum target for smooth gameplay. However, at 1440p and especially 4K, the GPU becomes the primary bottleneck, as evidenced by the Ultra preset falling to 54 FPS and 28 FPS respectively, which are below the 60 FPS threshold. The data also shows that the performance gap between the Low and Ultra presets widens with resolution; at 1080p, the difference is 131 FPS, at 1440p it is 83 FPS, and at 4K it is 44 FPS. This convergence indicates that as resolution increases, the GPU's raw pixel throughput becomes the dominant factor, reducing the impact of the CPU and other system components on overall frame rates.

GPU Role

The AMD Radeon RX 7600 XT is built on the RDNA 3.0 architecture with a chip codenamed Hotpink Bonefish, featuring a process node of 6 nm from TSMC, and it carries 16 GB of GDDR6 memory on a 128-bit bus, yielding a bandwidth of 288.0 GB/s. The GPU's clock speeds are specified with a base of 1980 MHz, a game clock of 2470 MHz, and a boost of 2755 MHz, with memory operating at 2250 MHz or 18 Gbps effective. These specifications directly influence the measured frame rates in Outriders, as the GPU's memory bandwidth of 288.0 GB/s is a critical resource for texture streaming and asset loading in a looter shooter with dense environments. The 16 GB VRAM capacity is substantial, and the benchmark results indicate that at 1080p and 1440p, the GPU is not running into memory capacity limits, as frame rates remain high across all presets.

The GPU's compute resources include 2048 shading units, 128 texture mapping units, and 64 render output units, along with 32 ray tracing cores, and it achieves a pixel rate of 176.3 GPixel/s and a texture rate of 352.6 GTexel/s. These numbers translate to a FP32 performance of 22.57 TFLOPS, which is the raw compute power available for rendering. In the context of Outriders, the measured FPS data shows that at 4K with the High preset, the GPU produces 39 FPS, which is below the 60 FPS target, suggesting that the GPU's fillrate and compute capabilities are insufficient for 4K at higher settings. The benchmark results also indicate a percentile ranking of 60 against all GPUs, with an average benchmark score of 17083, and the nearest rivals include the NVIDIA GeForce RTX 3070 with an average score of 17208, a 0.7% difference, and the NVIDIA GeForce GTX 690 with a score of 17037, a 0.3% difference. These comparisons place the RX 7600 XT in a mid-range tier, which aligns with its performance profile in Outriders where it excels at 1080p and 1440p but struggles at 4K with demanding presets.

Settings Recommendations

Based on the measured FPS data, the optimal settings for the Core i7-14700F and RX 7600 XT combination depend heavily on the target resolution and desired frame rate. At 1080p, the High preset delivers an average of 118 FPS, which is well above the 60 FPS threshold and suitable for high-refresh-rate monitors, while the Medium preset achieves 158 FPS with a minimum of 134 FPS, providing a smoother experience for competitive play. The Ultra preset at 1080p still manages 86 FPS, making it viable for those who prioritize visual fidelity over raw frame rate, but the data shows that the step from High to Ultra costs 32 FPS, which is a significant trade-off. For 1440p, the High preset at 75 FPS is the most balanced choice, as it remains above the 60 FPS target, while the Medium preset at 100 FPS provides additional headroom; the Ultra preset falls to 54 FPS, which may be acceptable for slower-paced gameplay but is not ideal for action sequences.

At 4K, the data presents a more challenging picture. The Low preset at 72 FPS is the only option that maintains an average above 60 FPS, making it the recommended choice for 4K gaming with this hardware. The Medium preset at 52 FPS with a minimum of 44 FPS is playable but may experience noticeable frame drops in intense combat, while the High preset at 39 FPS and Ultra at 28 FPS are below the playable threshold for most users. The measured data suggests that the user should prioritize the Medium preset at 1440p for the best balance of visual quality and performance, as it produces 100 FPS average with a minimum of 85 FPS, ensuring consistent frame pacing. Alternatively, for 1080p users, the High preset at 118 FPS offers a compelling mix of image quality and speed, and the data indicates that there is minimal benefit to dropping to Low, which only gains 99 FPS over High but sacrifices significant visual detail.

Measured FPS Breakdown

The detailed FPS measurements for Outriders with this hardware configuration are as follows. At 1920x1080 resolution, the Low preset achieves an average of 217 FPS, the Medium preset averages 158 FPS with a minimum of 134 FPS and a maximum of 182 FPS, the High preset averages 118 FPS, and the Ultra preset averages 86 FPS. At 2560x1440 resolution, the Low preset delivers an average of 137 FPS, the Medium preset averages 100 FPS with a minimum of 85 FPS and a maximum of 115 FPS, the High preset averages 75 FPS, and the Ultra preset averages 54 FPS. At 3840x2160 resolution, the Low preset averages 72 FPS, the Medium preset averages 52 FPS with a minimum of 44 FPS and a maximum of 60 FPS, the High preset averages 39 FPS, and the Ultra preset averages 28 FPS.

The data reveals that the Medium preset is the only one with complete min/max data across all three resolutions, providing insight into frame time consistency. At 1080p, the Medium preset's min/max range of 134–182 FPS shows a 48 FPS spread, which is a relatively wide variance, but the average of 158 FPS indicates that the system spends most of its time at higher frame rates. At 1440p, the Medium preset's range narrows to 85–115 FPS, a 30 FPS spread, and at 4K, it further narrows to 44–60 FPS, a 16 FPS spread. This trend suggests that as resolution increases, the frame rate becomes more consistent, which is counterintuitive but may be due to the GPU becoming the bottleneck and reducing the impact of CPU-side frame time spikes. The average frame rates across all settings show a clear hierarchy: Low > Medium > High > Ultra at every resolution, with the gap between Low and Ultra being 131 FPS at 1080p, 83 FPS at 1440p, and 44 FPS at 4K.

FAQ

Q: What is the best resolution for 60+ FPS with the High preset?

A: The measured data shows that 1920x1080 at High settings achieves 118 FPS, and 2560x1440 at High achieves 75 FPS, both above the 60 FPS threshold. At 3840x2160, the High preset drops to 39 FPS, which is below 60 FPS.

Q: How does the Ultra preset compare to High at 1080p?

A: At 1920x1080, the Ultra preset averages 86 FPS, which is 32 FPS lower than the High preset's 118 FPS. This represents a 27% reduction in average frame rate when moving from High to Ultra.

Q: Is the RX 7600 XT capable of 4K gaming in Outriders?

A: Yes, but only with the Low preset, which achieves an average of 72 FPS at 3840x2160. The Medium preset at 4K averages 52 FPS, and the High preset drops to 39 FPS, indicating that 4K gaming requires significant settings reductions.

Q: What is the frame time consistency like at 1440p?

A: The Medium preset at 2560x1440 has a minimum of 85 FPS and a maximum of 115 FPS, with an average of 100 FPS. This indicates a 30 FPS range, providing relatively stable frame pacing for most gameplay scenarios.

Q: How much performance does the Low preset gain over Ultra at 4K?

A: At 3840x2160, the Low preset averages 72 FPS, while the Ultra preset averages 28 FPS. This is a 44 FPS difference, meaning the Low preset provides 157% higher average frame rates compared to Ultra.

Q: What are the CPU's benchmark scores relative to its performance in this game?

A: The Core i7-14700F has a Cinebench R23 multi-core score of 35122 and a single-core score of 4958. In Outriders, the CPU maintains high frame rates at 1080p (118 FPS High), suggesting it is not the bottleneck at lower resolutions.

CPU Role

The Intel Core i7-14700F is a 20-core, 28-thread processor based on the Raptor Lake architecture, with a base clock of 2.10 GHz and a boost clock of 5.40 GHz. It features a substantial cache hierarchy with 80 KB of L1 per core, 2 MB of L2 per core, and 33 MB of shared L3 cache, which is critical for feeding data to the GPU in a game like Outriders. The CPU's benchmark scores demonstrate strong multi-threaded and single-threaded performance, with a Cinebench R23 multi-core score of 35122 and a single-core score of 4958, alongside a Geekbench multi-core score of 19620 and single-core score of 2429. In the context of Outriders, the measured FPS data at 1080p shows that the CPU is capable of driving frame rates up to 217 FPS at Low settings, which indicates that it is not the limiting factor at this resolution.

The CPU's percentile ranking of 91 against all CPUs, with an average benchmark score of 53620, places it in the top tier of processors. Its nearest rivals include the Intel Xeon 6505P with an average score of 53701 (0.2% difference), the Intel Xeon Phi 7290 at 53469 (0.3% difference), and the AMD Ryzen 9 7900X at 53288 (0.6% difference), showing that the i7-14700F is competitive with high-end workstation and desktop parts. In Outriders, the CPU's role becomes more pronounced at lower resolutions, where the GPU has more headroom; the data shows that at 1080p, the frame rates are consistently high across all settings, from 86 FPS at Ultra to 217 FPS at Low, suggesting that the CPU can keep up with the GPU's output. However, at higher resolutions like 4K, the GPU becomes the bottleneck, and the CPU's contribution is less critical, as evidenced by the frame rates dropping to 28–72 FPS depending on the preset. The CPU also supports DDR4 and DDR5 memory with a dual-channel bus, and its 65W TDP indicates efficient power consumption, which is notable for a 20-core processor.

How This Combo Ranks

In the comprehensive database of tested combinations for Outriders, the Intel Core i7-14700F paired with the AMD Radeon RX 7600 XT ranks at position 2244 out of 3710 total combinations. This ranking places the combo in the 60th percentile, which means that approximately 60% of tested configurations perform better in this specific game. The rank of 2244 out of 3710 suggests that while this combination is capable of delivering playable frame rates at 1080p and 1440p, it is not optimized for maximum performance in Outriders, particularly at higher resolutions where the GPU's limitations become apparent. The data indicates that the combo's ranking is driven primarily by the GPU's mid-range performance, as the CPU's high percentile ranking of 91 does not translate into a top-tier gaming experience in this title.

The combo's performance in Outriders can be contextualized by examining the individual components' standings. The CPU ranks in the 91st percentile against all CPUs, but the GPU ranks in the 60th percentile against all GPUs, and the combo's overall rank of 2244 out of 3710 reflects this imbalance. This suggests that in Outriders, the GPU is the limiting factor, and the CPU's strength is not fully utilized at higher resolutions. The measured FPS data supports this interpretation: at 1080p, the combo achieves frame rates above 86 FPS at all settings, which is a strong result, but at 4K, the frame rates drop below 72 FPS even at Low settings, indicating that the GPU cannot handle the pixel throughput required. The combo's rank of 2244 out of 3710 means that there are 1466 combinations that perform worse, which places it in the lower-middle tier of tested systems. For users with this hardware, the data suggests that the best experience will be at 1080p or 1440p with Medium to High settings, as the Ultra preset at 4K produces only 28 FPS, which is not a playable experience for most users.