Outriders

Outriders

AVERAGE FPS
74
good

This combination provides smooth gameplay with an average of 74 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 31 41 56
1440p QHD 42 58 78 107
1080p Full HD 67 93 123 170

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 56
3840x2160 Medium 41
3840x2160 High 31
3840x2160 Ultra 22
2560x1440 Low 107
2560x1440 Medium 78
2560x1440 High 58
2560x1440 Ultra 42
1920x1080 Low 170
1920x1080 Medium 123
1920x1080 High 93
1920x1080 Ultra 67

Outriders with Intel Core i7-13700K + NVIDIA GeForce GTX 1070, In-Depth Analysis

# Outriders Performance Analysis: Intel Core i7-13700K + NVIDIA GeForce GTX 1070

The pairing of Intel's 13th-generation flagship mainstream processor with NVIDIA's Pascal-era GTX 1070 creates a stark performance imbalance in Outriders. Benchmark data shows the GTX 1070 as the clear limiting factor across all tested resolutions and settings, with the CPU's substantial headroom never being fully utilized. This combination ranks 3050th out of 3710 tested configurations in this title, placing it in the lower 18th percentile of all combos—a position driven almost entirely by the aging GPU rather than the modern processor.

Resolution Scaling

The measured FPS data reveals a predictable but steep performance cliff as resolution increases. At 1080p with Low settings, the combo achieves 170 FPS average; stepping up to 1440p Low drops that to 107 FPS (a 37% reduction), and 4K Low yields 56 FPS (a 67% reduction from 1080p). This scaling pattern is the signature of a GPU-bound scenario—the CPU is capable of feeding frames far faster than the GTX 1070 can render them at higher pixel counts.

The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the spread from Low (170 FPS) to Ultra (67 FPS) is 103 FPS. At 1440p, that spread narrows to 65 FPS (107 down to 42). At 4K, the spread compresses to 34 FPS (56 down to 22). This compression indicates that at 4K, the GPU is so saturated that even reducing settings from Ultra to Low cannot recover playable performance—the pixel throughput ceiling dominates over shading complexity.

Looking at the Medium preset specifically, which has min/max data available, the resolution scaling shows a consistent pattern. At 1080p Medium, the average is 123 FPS with a minimum of 105 FPS. Dropping to 1440p Medium yields 78 FPS average with a 66 FPS minimum. At 4K Medium, the average falls to 41 FPS with a 35 FPS minimum. The minimum frame times degrade proportionally to averages, suggesting no unexpected stuttering or frame-time spikes—just steady, predictable GPU saturation.

The 4K Ultra result of 22 FPS average is particularly telling. This is below the threshold for comfortable gameplay in a looter shooter, where target acquisition and reaction speed matter. The data shows that this combination is not viable at 4K Ultra, and even 4K High at 31 FPS sits right at the edge of playability. The resolution scaling analysis points to a GPU that has roughly half the raw throughput needed for comfortable 4K gaming in this title, regardless of how much CPU headroom exists.

FAQ

Q: What is the best resolution to play Outriders with this hardware combo?

A: The data shows 1080p as the only resolution where all settings presets remain playable. At 1080p, even Ultra settings maintain 67 FPS average, while High runs at 93 FPS and Medium at 123 FPS. At 1440p, only Low and Medium settings stay above 60 FPS (107 and 78 FPS respectively).

Q: Is the GTX 1070 bottlenecking the Core i7-13700K in this game?

A: Yes, the evidence is overwhelming. The CPU's single-core benchmark score of 2116 in Cinebench R23 and multi-core score of 30745 indicate massive processing headroom, yet the GPU's PassMark G3D score of 13498 places it at the 47th percentile of all GPUs. The FPS scaling pattern—where reducing resolution from 4K to 1080P nearly triples frame rates—confirms GPU-bound performance.

Q: How does this combo compare to similar hardware pairings in Outriders?

A: This combination ranks 3050th out of 3710 tested combos, placing it in the bottom 18% of all configurations. The GPU's nearest rivals in benchmark scores are the AMD FirePro W5000 (0.2% faster), NVIDIA Quadro M2000M (0.5% faster), NVIDIA Tesla M10 (0.6% slower), and NVIDIA Tesla C2070 (0.7% slower)—all professional or workstation-class cards, not gaming GPUs.

Q: What settings preset gives the smoothest experience at 1440p?

A: Medium settings at 1440p deliver 78 FPS average with a 66 FPS minimum, which is the only preset at this resolution that stays comfortably above 60 FPS. Low settings hit 107 FPS but sacrifice visual quality, while High drops to 58 FPS and Ultra falls to 42 FPS.

Q: Can this combo handle 4K gaming in Outriders?

A: Only at Low settings, which produce 56 FPS. Medium settings drop to 41 FPS, High to 31 FPS, and Ultra to 22 FPS. For consistent 60 FPS gameplay at 4K, none of the tested presets are sufficient—even Low settings fall short of the 60 FPS threshold.

Q: How does the CPU's performance ranking affect gaming outcomes?

A: The Core i7-13700K sits at the 89th percentile of all CPUs with an average benchmark score of 46881, placing it within 0.5% of rivals like the AMD Ryzen 9 5900 and AMD Ryzen 9 7845HX. However, this CPU strength contributes nothing to Outriders performance at 4K, where the GPU is the sole bottleneck.

CPU Role

The Intel Core i7-13700K brings 16 cores and 24 threads based on the Raptor Lake architecture, built on Intel's 10nm process. With a base clock of 3.40 GHz and boost up to 5.40 GHz, this processor shows exceptional synthetic performance: a Cinebench R23 multi-core score of 30745 and single-core score of 2116. The 3DMark results reinforce this, with 16-thread scoring of 10717 and max-thread scoring of 12412.

However, Outriders' measured performance reveals that this CPU power is largely irrelevant to the final frame rates. The evidence lies in the resolution scaling: if the CPU were the limiting factor, reducing resolution would not significantly increase FPS. Instead, the data shows 1080p Low at 170 FPS versus 4K Low at 56 FPS—a 3x difference that can only be explained by GPU limitations. The CPU's 30 MB of shared L3 cache and dual-channel memory support provide ample bandwidth for game data, but the GPU simply cannot consume frames fast enough to stress these resources.

The processor's nearest rivals in synthetic benchmarks—the AMD Ryzen 9 5900 at 0.2% slower and AMD Ryzen 9 7845HX at 0.5% faster—all sit within a narrow performance band. This clustering indicates that any of these CPUs would produce nearly identical Outriders frame rates when paired with a GTX 1070, because the GPU bottleneck masks CPU differences entirely. The takeaway is that in this specific configuration, CPU selection has negligible impact on Outriders performance.

Measured FPS Breakdown

The complete dataset provides 12 measured configurations—four settings presets at three resolutions. At 1920x1080, the results are: Low settings produce 170 FPS average, Medium produces 123 FPS (with a 105 FPS minimum and 142 FPS maximum), High produces 93 FPS, and Ultra produces 67 FPS. Every preset at 1080p exceeds the 60 FPS threshold, with even the most demanding Ultra preset maintaining a comfortable margin.

Moving to 2560x1440, the performance drops are substantial but manageable for lower presets. Low settings average 107 FPS, Medium averages 78 FPS (66 min, 90 max), High averages 58 FPS, and Ultra averages 42 FPS. The Medium preset at 1440p is the sweet spot for maintaining high refresh rates, while High and Ultra fall below 60 FPS and become less ideal for fast-paced combat.

At 3840x2160, the GTX 1070's limitations become severe. Low settings produce 56 FPS average, barely missing the 60 FPS target. Medium drops to 41 FPS (35 min, 47 max), High to 31 FPS, and Ultra to 22 FPS. The min/max data at Medium settings shows a relatively tight 12 FPS range, indicating consistent frame pacing rather than erratic spikes—but the overall performance level is too low for competitive play at this resolution.

Comparing the Medium preset across resolutions provides the cleanest scaling picture: 123 FPS at 1080p, 78 FPS at 1440p, and 41 FPS at 4K. This represents roughly a 37% and 67% reduction respectively, which aligns closely with the pixel count increases (78% more pixels from 1080p to 1440p, and 4x from 1080p to 4K). The non-linear relationship between pixel count and FPS drop suggests memory bandwidth limitations on the GTX 1070, which has a 256-bit bus and 256.3 GB/s bandwidth.

GPU Role

The NVIDIA GeForce GTX 1070 is built on the Pascal architecture with the GP104 chip, fabricated on TSMC's 16nm process. It contains 7,200 million transistors across a 314 mm² die, with 1920 shading units, 120 texture mapping units, and 64 ROPs. The GPU operates at a base clock of 1506 MHz with a boost of 1683 MHz, and its 8 GB of GDDR5 memory runs at 2002 MHz (8 Gbps effective) across a 256-bit interface.

In synthetic benchmarks, the GTX 1070 achieves a PassMark G3D score of 13498 and a 3DMark Steel Nomad DX12 score of 1082. Its average benchmark score of 9780 places it at the 47th percentile of all GPUs—essentially middle-of-the-pack. The nearest rivals in benchmark scores are the AMD FirePro W5000 (0.2% faster), NVIDIA Quadro M2000M (0.5% faster), NVIDIA Tesla M10 (0.6% slower), and NVIDIA Tesla C2070 (0.7% slower). Notably, none of these are modern gaming GPUs, highlighting how far behind current standards the GTX 1070 has fallen.

The GPU's FP32 performance of 6.463 TFLOPS and texture rate of 202.0 GTexel/s provide theoretical context for Outriders' demands. The game's Unreal Engine-based rendering appears to scale predictably with these metrics, as evidenced by the linear FPS progression from Low to Ultra settings at each resolution. At 4K, the 22 FPS Ultra result suggests the GPU's pixel fill rate (107.7 GPixel/s) is the primary constraint, while at 1080p the 170 FPS Low result shows the GPU still has headroom when shading complexity is reduced.

The GTX 1070's 8 GB VRAM capacity is sufficient for this game—Outriders' texture requirements appear to fit within this budget based on the absence of stutter-related min FPS anomalies. The minimum FPS values recorded at Medium settings (105 at 1080p, 66 at 1440p, 35 at 4K) are proportionally consistent with averages, indicating no VRAM overflow or texture streaming issues.

Settings Recommendations

For the best balance of visual quality and performance, the data points to 1080p Medium as the optimal configuration. At 123 FPS average with a 105 FPS minimum, this preset provides a 60% performance buffer over the 60 FPS target while maintaining moderate visual fidelity. The min/max range of 105-142 FPS shows excellent frame consistency, which matters more for gameplay smoothness than raw average FPS.

Players with high-refresh-rate monitors (144Hz or above) should consider 1080p Low settings, which achieve 170 FPS average. This preset sacrifices visual effects but ensures the frame rate stays above typical refresh rate ceilings, maximizing responsiveness in firefights. The 47 FPS gap between Low and Medium at 1080p (170 vs 123) suggests that shadow quality and post-processing effects are the primary performance drivers.

For 1440p users, the only viable high-refresh option is Medium settings, delivering 78 FPS average and 66 FPS minimum. This keeps gameplay above 60 FPS with a modest safety margin. High settings at 1440p (58 FPS) drop below the 60 FPS threshold, making Medium the highest preset that maintains smooth performance at this resolution.

At 4K, no preset achieves consistent 60 FPS. Low settings at 56 FPS is the closest option, but even this falls short. The 41 FPS Medium result provides more visual detail at the cost of smoother motion, which may be acceptable for slower-paced exploration but is not ideal for combat encounters. Ultimately, players targeting 4K should either accept sub-60 FPS performance or consider this hardware insufficient for that resolution in Outriders.

The Ultra preset is not recommended at any resolution. At 1080p it delivers 67 FPS (only 21% higher than the 55 FPS minimum needed for 60 FPS consistency), at 1440p it drops to 42 FPS, and at 4K it falls to 22 FPS. The visual improvements from High to Ultra do not justify the significant FPS penalties observed.

How This Combo Ranks

This specific combination of Intel Core i7-13700K and NVIDIA GeForce GTX 1070 ranks 3050th out of 3710 tested combos in Outriders, placing it at the 82nd percentile from the bottom. This ranking reflects the GPU's age and performance tier rather than any CPU deficiency—the processor's 89th percentile CPU ranking (average benchmark score of 46881) is a stark contrast to the GPU's 47th percentile standing.

The combo's position in the bottom 18% of tested configurations is consistent with the GPU's benchmark profile. The GTX 1070's average benchmark score of 9780, surrounded by rivals like the AMD FirePro W5000 and NVIDIA Quadro M2000M, places it in a performance tier that predates modern gaming demands. The fact that this GPU can still deliver 170 FPS at 1080p Low in Outriders speaks to the game's scalability, but its 4K Ultra performance of 22 FPS confirms its status as a legacy component.

The ranking also reveals an interesting asymmetry: the CPU could support far higher frame rates if paired with a more capable GPU. The 16-core, 24-thread Raptor Lake processor's multi-threaded benchmark results (Cinebench R23 multi-core score of 30745) are among the top tier, yet this combo's Outriders performance is dragged down entirely by the GPU. In any GPU-bound scenario, which Outriders clearly is based on the resolution scaling data, the CPU's ranking is irrelevant to gameplay outcomes.

Users considering this combo for Outriders should recognize that the GTX 1070 is the limiting factor across all settings and resolutions. Upgrading the GPU would yield substantial FPS improvements, while upgrading the CPU would provide no measurable benefit in this title. The 3050th rank out of 3710 combos accurately reflects this imbalance—a modern powerhouse CPU paired with an end-of-life GPU produces results consistent with the GPU's capabilities, not the CPU's potential.

Hardware Specifications

Intel Core i7-13700K

Cores / Threads 16 / 24
Base Clock 3400 MHz
Boost Clock 5400 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i7-13700K + NVIDIA GeForce GTX 1070 in Outriders

Resolution Settings Avg FPS
3840x2160 Low 56.0
3840x2160 Medium 41.0
3840x2160 High 31.0
3840x2160 Ultra 22.0
2560x1440 Low 107.0
2560x1440 Medium 78.0
2560x1440 High 58.0
2560x1440 Ultra 42.0
1920x1080 Low 170.0
1920x1080 Medium 123.0
1920x1080 High 93.0
1920x1080 Ultra 67.0

Outriders with GTX 1070 + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with ii7-13700K + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.