Outriders
This combination provides smooth gameplay with an average of 89 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 30 | 37 | 47 | 69 |
| 1440p QHD | 49 | 70 | 94 | 128 |
| 1080p Full HD | 80 | 112 | 153 | 206 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Outriders with Intel Core i5-14600KF + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 3060 Ti produces a predictable scaling pattern in Outriders, but the curve reveals where the bottleneck shifts. At 1920x1080 with Low settings, the combo delivers 205.7 FPS, which drops to 111.7 FPS at High and 80.2 FPS at Ultra. Moving to 2560x1440, the Low preset still manages 127.6 FPS, while High falls to 69.6 FPS and Ultra to 48.5 FPS. At 3840x2160, the ceiling tightens dramatically: Low produces 68.8 FPS, High drops to 36.8 FPS, and Ultra bottoms out at 29.9 FPS.
The scaling from 1080p to 4K at Low settings shows a 66.5% reduction in frame rate (205.7 to 68.8 FPS), which indicates the GPU becomes the primary limiter as pixel count rises. At Ultra settings, the drop from 80.2 FPS at 1080p to 29.9 FPS at 4K is a 62.7% decline, suggesting the graphics card's raw throughput governs performance across the board. The CPU, with its 14 cores and 20 threads, appears capable of feeding frames at lower resolutions, as evidenced by the 205.7 FPS result at 1080p Low, but the RTX 3060 Ti cannot maintain that pace when resolution increases.
Resolution Scaling
The measured data shows that Outriders scales almost linearly with resolution for this hardware combination. At 1080p, the spread between Low and Ultra is 125.5 FPS (205.7 vs 80.2), which is a 61% performance gap. At 1440p, that spread narrows to 79.1 FPS (127.6 vs 48.5), a 62% difference. At 4K, the spread compresses to 38.9 FPS (68.8 vs 29.9), a 56.5% gap. This compression at higher resolutions is characteristic of a GPU-bound scenario, where the RTX 3060 Ti's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth become the constraining factors.
The transition from 1080p to 1440p at High settings costs 42.1 FPS (111.7 to 69.6), a 37.7% reduction. Moving from 1440p to 4K at the same preset costs another 32.8 FPS (69.6 to 36.8), a 47.1% reduction. The data indicates that 4K gaming is only viable at Low or Medium presets, with Medium yielding 46.5 FPS and Low reaching 68.8 FPS. The 1440p resolution offers the best balance, as High settings produce 69.6 FPS, which is above the 60 FPS threshold for smooth gameplay.
Settings Recommendations
For players targeting 1920x1080, the Ultra preset delivers 80.2 FPS, which is playable but leaves headroom for higher refresh rates. The Medium preset at 153.1 FPS is the sweet spot for competitive play, providing nearly double the frame rate of Ultra with only a moderate visual compromise. At 2560x1440, the High preset at 69.6 FPS is the recommended choice, as it offers a smooth experience while maintaining visual fidelity. The Medium preset at 94.1 FPS is also viable for those prioritizing frame rate over detail.
At 3840x2160, the data suggests that Low settings at 68.8 FPS are the only option for consistent 60 FPS gameplay. The Medium preset at 46.5 FPS is borderline, and High at 36.8 FPS or Ultra at 29.9 FPS are not advisable for action-oriented gameplay in a looter shooter, where responsiveness matters. The 1440p High preset appears to be the most balanced configuration, as it maintains a playable frame rate while preserving the visual effects that define Outriders' combat feedback.
How This Combo Ranks
The combination of the Intel Core i5-14600KF and NVIDIA GeForce RTX 3060 Ti ranks 1209 out of 1693 tested combos in Outriders. This places it in the lower-middle tier of the database, indicating that while it is not a top-tier configuration, it is far from the bottom. The CPU's percentile ranking of 93 among all CPUs suggests strong processing capability, while the GPU's percentile ranking of 69 among all GPUs shows it is a mid-range performer. The discrepancy between these two percentiles explains the ranking, as the GPU holds back the overall combo in a game that scales heavily with resolution.
The nearest rivals for the CPU include the Intel Core i5-14600K with a delta of 0.4% and the AMD EPYC 4345P with a delta of -0.5%, showing that the 14600KF is competitive with its direct peers. The GPU's nearest rivals include the AMD Radeon RX 6700M with a delta of -0.2% and the AMD Radeon RX 6600 with a delta of -0.5%, indicating that the RTX 3060 Ti sits at parity with these alternatives. The combo's rank suggests that in Outriders, the GPU is the limiting factor, as the CPU has ample headroom to support higher frame rates if paired with a stronger graphics card.
Measured FPS Breakdown
At 1920x1080, the measured frame rates are as follows: Low settings produce 205.7 FPS, Medium produces 153.1 FPS, High produces 111.7 FPS, and Ultra produces 80.2 FPS. The step from Low to Medium is a 25.5% reduction, while the step from Medium to High is a 27% reduction, and High to Ultra is a 28.2% reduction. This consistent decline suggests that each preset tier adds similar graphical load, and the GPU handles each increment with proportional performance loss.
At 2560x1440, the frame rates are: Low at 127.6 FPS, Medium at 94.1 FPS, High at 69.6 FPS, and Ultra at 48.5 FPS. The relative reductions are steeper than at 1080p, with Medium dropping 26.2% from Low, High dropping 26% from Medium, and Ultra dropping 30.3% from High. At 3840x2160, the frame rates are: Low at 68.8 FPS, Medium at 46.5 FPS, High at 36.8 FPS, and Ultra at 29.9 FPS. The Medium to High drop is 20.8%, while High to Ultra is 18.7%, showing that the GPU's memory bandwidth becomes saturated at this resolution.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with a GA104 chip, fabricated on Samsung's 8 nm process. It features 4864 shading units, 152 texture mapping units, and 80 raster output units, with 38 ray tracing cores and 152 tensor cores. The GPU operates at a base clock of 1410 MHz and a boost clock of 1665 MHz, with memory running at 1750 MHz or 14 Gbps effective. The 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is the critical specification for Outriders' performance at high resolutions.
The 3DMark Steel Nomad DX12 score of 2626 and PassMark G3D score of 20349 place the GPU at the 69th percentile among all GPUs. The nearest rivals include the AMD Radeon RX 6700M with a delta of -0.2% and the AMD Radeon RX 6600 with a delta of -0.5%, showing tight competition in this performance bracket. In Outriders, the GPU's 8 GB memory capacity becomes a limiting factor at 4K Ultra, where the 29.9 FPS result suggests the memory bandwidth and capacity are insufficient for the game's demands at that setting. The data indicates that the GPU is the primary bottleneck at 1440p and 4K, as evidenced by the significant frame rate drops when moving from Low to Ultra presets.
CPU Role
The Intel Core i5-14600KF is a 14-core, 20-thread processor based on the Raptor Lake architecture, manufactured on Intel's 10 nm process. It has a base clock of 3.50 GHz and a boost clock of 5.30 GHz, with a 125 W TDP. The CPU features 80 KB of L1 cache per core, 2 MB of L2 cache per core, and 24 MB of shared L3 cache. It supports DDR4 and DDR5 memory in dual-channel configuration, with PCIe Gen 5 providing 16 lanes for the CPU.
The CPU's benchmark results show a Cinebench R23 multicore score of 32889 and a single-core score of 4643, with a Geekbench multicore score of 15636 and single-core score of 2778. The PassMark multithread score of 38697 and single-thread score of 4273 place it at the 93rd percentile among all CPUs. The nearest rivals include the Intel Core i5-14600K with a delta of 0.4% and the AMD Ryzen 9 5950X with a delta of 0.6%, showing that the 14600KF is competitive with high-end alternatives.
In Outriders, the CPU's role is evident at lower resolutions where frame rates exceed 200 FPS. At 1080p Low, the 205.7 FPS result demonstrates that the CPU can feed the GPU effectively, but the GPU's limitations become apparent as resolution increases. The CPU's 14 cores and 20 threads provide ample processing power for the game's physics and AI calculations, and the high boost clock of 5.30 GHz ensures strong single-threaded performance for game logic. The data shows that the CPU is not the limiting factor in this combination, as the frame rates scale consistently with GPU load rather than showing CPU-bound stalling at any resolution.
Hardware Specifications
Intel Core i5-14600KF
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14600KF + NVIDIA GeForce RTX 3060 Ti in Outriders
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 68.8 |
| 3840x2160 | Medium | 46.5 |
| 3840x2160 | High | 36.8 |
| 3840x2160 | Ultra | 29.9 |
| 2560x1440 | Low | 127.6 |
| 2560x1440 | Medium | 94.1 |
| 2560x1440 | High | 69.6 |
| 2560x1440 | Ultra | 48.5 |
| 1920x1080 | Low | 205.7 |
| 1920x1080 | Medium | 153.1 |
| 1920x1080 | High | 111.7 |
| 1920x1080 | Ultra | 80.2 |
Outriders with ii5-14600KF + Other GPUs
See how Outriders performs with the same CPU but different graphics cards.
Outriders with RTX 3060 Ti + Other CPUs
See how Outriders performs with the same GPU but different processors.
Other Games with ii5-14600KF + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.