Outriders

FAQ

Q: What is the measured performance of the Intel Core i3-12100F and AMD Radeon RX 7900 XT combo in Outriders?

A: The data shows this combination produces an average of 120 FPS at 3840x2160 Low settings, 125 FPS at 2560x1440 High settings, and 170 FPS at 1920x1080 High settings, with the best measured result being 212 FPS at 1920x1080 Low.

Q: How does this combo rank among tested configurations for Outriders?

A: The combo ranks 832nd out of 3,710 tested combinations in the database, placing it in the top quartile of all tested setups for this title.

Q: What is the difference between the CPU's multi-threaded and single-threaded performance?

A: The Intel Core i3-12100F scores 4,051 in 3DMark 16-thread testing and 893 in single-thread testing, while Cinebench R23 results show 11,860 multi-core and 1,674 single-core scores, indicating strong single-thread capability relative to its multi-thread output.

Q: How does the GPU's memory configuration affect Outriders performance?

A: The AMD Radeon RX 7900 XT features 20 GB of GDDR6 memory on a 320-bit bus with 800.0 GB/s bandwidth, which supports high-resolution texture streaming without capacity constraints, as evidenced by playable frame rates even at 4K Ultra.

Q: What is the CPU's percentile ranking compared to all processors?

A: The Core i3-12100F sits at the 68th percentile among all CPUs, with an average benchmark score of 13,494, placing it just ahead of the Intel Core i5-9500, which scores 13,452.

Q: What is the GPU's percentile ranking compared to all graphics cards?

A: The RX 7900 XT holds the 55th percentile among all GPUs, with an average benchmark score of 13,745, and sits close to the AMD Radeon 660M, which scores 13,812.

GPU Role

The AMD Radeon RX 7900 XT is the dominant component in this pairing, built on the RDNA 3.0 architecture with the Navi 31 chip. Its 5 nm process node from TSMC packs 57,700 million transistors into a 529 mm² die, and the card operates at a base clock of 1387 MHz with a boost clock of 2394 MHz. The game clock is rated at 2025 MHz, which represents the sustained frequency expected during typical gaming workloads.

Memory configuration plays a critical role in Outriders' performance at high resolutions. The 20 GB GDDR6 frame buffer, paired with a 320-bit bus, delivers 800.0 GB/s of bandwidth. This is particularly relevant for a looter shooter where assets load frequently during gameplay transitions. The measured results show that even at 3840x2160 Ultra, the combo maintains 47 FPS average, indicating that the 20 GB capacity prevents any memory-related stutters or texture pop-in that could otherwise bottleneck performance.

The GPU's compute capabilities are substantial, with 5,376 shading units, 336 TMUs, and 192 ROPs contributing to a pixel rate of 459.6 GPixel/s and a texture rate of 804.4 GTexel/s. The FP32 throughput of 51.48 TFLOPS provides ample headroom for the DirectX 12 rendering path that Outriders utilizes, and the card's support for DirectX 12 Ultimate (12_2) ensures compatibility with modern rendering features. At 4K resolutions, the GPU becomes the primary performance driver; the difference between Low and Ultra settings at 3840x2160 is stark, with average FPS ranging from 120 down to 47.

How This Combo Ranks

In the database of tested Outriders configurations, this Intel Core i3-12100F and AMD Radeon RX 7900 XT combination ranks 832nd out of 3,710 total combos. This places the setup in the upper 22% of all tested pairings, which is notable given that the CPU is a budget-oriented quad-core part while the GPU is a high-end enthusiast card.

The ranking reflects a system that is heavily GPU-bound in most scenarios. The RX 7900 XT's 55th percentile standing among all GPUs contrasts sharply with the i3-12100F's 68th percentile among CPUs, but the GPU's raw power compensates for the CPU's modest multi-threaded capabilities. When compared to other combos in the database, this pairing outperforms the majority of systems that would typically pair a mid-range CPU with a mid-range GPU, though it falls short of top-tier configurations that use higher-core-count processors.

The rank of 832 indicates that while this setup delivers excellent frame rates at 1080p and 1440p, it does not reach the absolute top tier. Systems ranked above it likely pair the RX 7900 XT with more powerful CPUs, allowing higher minimum frame rates in CPU-limited scenarios. However, the data shows that for Outriders specifically, the combo still achieves 144 FPS average at 1080p Ultra, which exceeds the refresh rate of most mainstream monitors.

Measured FPS Breakdown

At 3840x2160, the resolution most likely to stress the GPU, the measured results show a clear scaling pattern across settings. Low settings produce 120 FPS average, Medium yields 87 FPS with a minimum of 74 and maximum of 101, High drops to 66 FPS, and Ultra falls to 47 FPS. This represents a 2.5x performance difference between the lowest and highest quality presets at 4K, demonstrating that the RX 7900 XT has sufficient headroom to handle 4K gaming but requires settings adjustments for smooth 60 FPS gameplay.

Moving to 2560x1440, the performance envelope expands significantly. Low settings deliver 182 FPS average, Medium produces 162 FPS with a range of 137 to 186, High reaches 125 FPS, and Ultra maintains 91 FPS. The Medium preset at 1440p shows a particularly stable frame time distribution, with the minimum only 25 FPS below the average, suggesting consistent frame pacing.

At 1920x1080, the combo becomes increasingly CPU-bound at lower settings. Low settings achieve 212 FPS average, Medium produces 189 FPS with a minimum of 160 and maximum of 217, High reaches 170 FPS, and Ultra still manages 144 FPS. The gap between Low and Ultra at 1080p is only 68 FPS, compared to a 73 FPS gap at 4K, indicating that the GPU is not the sole limiting factor at this resolution. The i3-12100F's 4 cores and 8 threads, operating at base and boost clocks of 3.30 GHz and 4.30 GHz respectively, begin to constrain performance when the GPU could otherwise render even higher frame rates.

CPU Role

The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture, manufactured on Intel's 10 nm process. Its base clock of 3.30 GHz and boost clock of 4.30 GHz provide solid single-thread performance, as reflected in benchmark scores of 893 in 3DMark single-thread and 1,674 in Cinebench R23 single-core. The 12 MB of shared L3 cache, while modest by modern standards, is sufficient for the game's working set.

In Outriders, the CPU's role varies dramatically by resolution. At 1080p with Low settings, the 212 FPS average suggests the CPU is keeping pace with the GPU's output, but the 12 MB L3 cache and 4-core configuration may cause occasional frame dips in busy combat scenarios with multiple enemies and particle effects. The multi-threaded performance, measured at 4,051 in 3DMark 16-thread and 11,860 in Cinebench R23 multi-core, is adequate for the game's threading model, which typically scales well to 8 threads.

The CPU's percentile ranking of 68 places it above the average processor, and its nearest rivals include the Intel Core i5-9500 with a score of 13,452 and the Intel Core 5 120UL at 13,594. The i3-12100F's average benchmark score of 13,494 puts it within 0.3% of the i5-9500, demonstrating that the newer architecture compensates for fewer cores. At 4K resolution, the CPU's influence diminishes, as the GPU becomes the bottleneck; the difference between 1080p and 4K frame rates at the same settings illustrates this clearly, with High settings dropping from 170 FPS to 66 FPS as resolution increases.

Settings Recommendations

For 3840x2160 gameplay, the Medium preset is the optimal choice based on the measured data. It delivers 87 FPS average with a minimum of 74 FPS, which provides a comfortable margin above the 60 FPS threshold for smooth gameplay. High settings at 66 FPS are playable but offer less headroom for demanding scenes, while Ultra's 47 FPS average falls below the ideal refresh threshold for most displays. Low settings at 120 FPS are viable for competitive play, but the visual quality sacrifice is substantial.

At 2560x1440, the High preset at 125 FPS average offers the best balance of visual fidelity and performance. Ultra at 91 FPS is also excellent for users prioritizing image quality, and the Medium preset's 162 FPS average with a 137 FPS minimum makes it suitable for high-refresh-rate displays (144Hz or above). Low settings at 182 FPS provide maximum responsiveness for fast-paced encounters.

For 1920x1080, the Ultra preset at 144 FPS average is the recommended choice, as it delivers the full visual experience while maintaining frame rates that exceed standard 60Hz and 144Hz displays. The Medium preset at 189 FPS is preferable for competitive players using 240Hz monitors, though the 160 FPS minimum indicates some variability. High at 170 FPS is a reasonable middle ground, and Low at 212 FPS is only recommended for esports-style play where maximum frame rate is paramount.

The data consistently shows that the Medium preset offers the most stable frame pacing across all resolutions, with the minimum FPS values recorded only for this setting (74 at 4K, 137 at 1440p, 160 at 1080p). This suggests that Medium uses a balanced mix of GPU and CPU resources, avoiding the CPU bottlenecks that can occur at lower settings and the GPU saturation that occurs at Ultra. For most users, Medium at 1440p or High at 1080p will provide the best overall experience, with the choice depending on whether visual fidelity or frame rate takes priority.