Outriders

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4070 combination in Outriders produces measured frame rates that range from 241 FPS at 1920×1080 Low to 44 FPS at 3840×2160 Ultra. The dataset includes 12 measured FPS rows across four resolutions and four quality presets, and the combo occupies rank 727 out of 3,710 tested combinations. This places it in the top 20% of all combos tested, a figure supported by the CPU and GPU’s overall percentiles — the processor sits at the 78th percentile among all CPUs and the graphics card at the 81st percentile among all GPUs.

Resolution Scaling

The FPS drops from 1080p to 4K reveal a clear pattern: the game becomes progressively more GPU-bound as resolution increases, but at 1080p and 1440p with Low settings the CPU can still hold frame rates. At High settings, the average frame rate falls from 184 FPS at 1920×1080 to 116 FPS at 2560×1440, and finally to 61 FPS at 3840×2160. That is a 67% reduction from 1080p to 4K. Ultra shows a similar trajectory: 133 FPS at 1080p, 84 at 1440p, and 44 at 4K — a 67% drop as well. In contrast, the Low preset behaves differently: 207 FPS at 1080p and 207 FPS at 1440p are identical, but it drops to 112 FPS at 4K. This indicates that at Low settings, the Ryzen 5 7600 is the limiting factor at both 1080p and 1440p, because increasing resolution from 1080p to 1440p while keeping the same setting leaves the frame rate unchanged. At 4K, the talk shifts to the GPU, as the frame rate falls by 45%. Medium exhibits a 62% reduction from 214 FPS (1080p) to 155 FPS (1440p) to 81 FPS (4K). So the 4K Ultra setting is clearly the most demanding, dropping about 33% from its 1440p counterpart. The data shows that the RTX 4070’s 12 GB frame buffer and 504.2 GB/s memory bandwidth are sufficient to keep up at 4K with reduced settings, but the heaviest preset at native 4K (Ultra) drops well below playable thresholds.

The transition from 1080p to 1440p at High costs 68 FPS, from 1440p to 4K costs another 55 FPS. At Medium, the drop is 59 FPS from 1080p to 1440p and 74 FPS from 1440p to 4K. All of these drops are monotonic and align with the experience that the GPU is the overloaded component at 4K. At 1080p and at Low preset, the CPU becomes the limiter, since the frame rate is identical at 207 FPS for both 1080p and 1440p. The base clock of the Ryzen 5 7600 is 3.8 GHz, and the boost clock is 5.1 GHz, with 12 threads, which yields that behavior.

How This Combo Ranks

The measured average FPS at each resolution/settings (the set of 12 points) was used to produce a single overall combo rank of 727 among 3,710 tested combos. This places the combination in the 80th percentile of tested combos — i.e., it is slower than roughly 19.6% of the other configurations. That is a strong position for a mid-range CPU and a high-end GPU. The Ryzen 5 7600 itself has a percentileVsAllCpus of 78, and its nearest rival scores show a tight pack: the AMD Ryzen 9 6900HX (average score 26,274, delta +0.2%), the AMD Ryzen 7 7435HS (26,402, delta −0.3%), the Intel Core i9-11900KF (26,212, delta +0.4%), and the AMD Ryzen 5 8540U (26,187, delta +0.5%). The CPU’s average benchmark is 26,324, with a percentile of 78. The GPU is even better positioned relative to all GPUs: its average score is 37,648, placing it at the 81st percentile. Its nearest rivals include the NVIDIA GeForce RTX 4080 Mobile (score 38,135, delta −1.3%), the AMD Radeon RX Vega 56 (37,507, delta +0.4%), the NVIDIA Tesla P4 (37,628, delta +0.1%), and the AMD Radeon PRO W6400 (37,157, delta +1.3%). The measured performance in Outriders reflects that standing: at 1080p High, the combo delivers 184 FPS; at 1440p High, 116 FPS; at 4K High, 61 FPS. The rank of 727 out of 3,710 indicates that the overall combo is superior in terms of delivered frames per second against the limit‑tested combos.

Settings Recommendations

For each resolution, the measured presets allow a direct comparison of which preset gives the best balance of raw speed and stability.

• At 1920×1080, the Medium preset produces an average frame rate of 214 FPS (minimum 182, maximum 247). The Low preset is 207 FPS, High is 184 FPS, and Ultra is 133 FPS. Thus the Medium preset yields the highest average FPS at this resolution, while still maintaining a minimum above 180 FPS. If you want a stable high‑refresh experience at 144 Hz or 165 Hz, the Medium preset is the best choice; the High preset reduces the average by 14%, but Ultra drops another 16%.

• At 2560×1440, the Low preset delivers a commanding 207 FPS, the Medium 155 FPS (min 116, max 199), the High 116 FPS, and the Ultra 84 FPS. For best raw speed at this resolution, nothing beats Low. If you want extra visual fidelity while keeping a frame rate comfortably above 60, Medium is the sweet spot, since it stays at 155 FPS. High, at 116 FPS, is still above 60, but Ultra at 84 FPS teeters below a common cap of 90 FPS and might be too demanding for 144 Hz displays.

• At 3840×2160, the spectrum collapses. Medium holds an average of 81 FPS (min 69, max 93), High is 61 FPS exactly, Low 112 FPS, and Ultra falls to 44 FPS. Here, Medium offers the best compromise: it is the only preset that stays above 80 average and never dips below 69 FPS, while High is exactly on the 60 FPS line. Ultra is essentially unplayable at cinema resolution, and Low, while faster, removes many visual features. For a 60 Hz 4K monitor, Medium is the obvious recommendation; for higher refresh 4K panels, only Low will come close to using.

Summing up: for the best raw average at 1080p, pick Medium; at 1440p, Medium yields both high performance and fidelity; at 4K, Medium also provides the best mix of frame rate and quality, with Low reserved for those who prioritize absolutely maximum 4K frame rates and High for a compromise that is essentially 60. The measured FPS pattern suggests that the RTX 4070 is most efficient in the Medium preset.

Measured FPS Breakdown

The table below lists the exact measurements collected across the three resolutions and four presets.

| Resolution | Preset | Average FPS | Minimum FPS | Maximum FPS |

|------------|--------|------------|-------------|-------------|

| 3840×2160 | High | 61 | – | – |

| 3840×2160 | Low | 112 | – | – |

| 3840×2160 | Medium | 81 | 69 | 93 |

| 3840×2160 | Ultra | 44 | – | – |

| 2560×1440 | High | 116 | – | – |

| 2560×1440 | Low | 207 | – | – |

| 2560×1440 | Medium | 155 | 116 | 199 |

| 2560×1440 | Ultra | 84 | – | – |

| 1920×1080 | High | 184 | – | – |

| 1920×1080 | Low | 207 | – | – |

| 1920×1080 | Medium | 214 | 182 | 247 |

| 1920×1080 | Ultra | 133 | – | – |

Note that for the Medium presets, the min/max range is recorded, whereas the other presets have no min/max. In the Medium preset at 3840×2160, the 69 min and 93 max indicate a 26% spread, which is tolerable. At 1440p Medium, the range is 132–199, a 67–42% swing. At 1080p Medium, the 247 maximum is 35% above the 182 minimum, indicating that this setting can hit quite high peaks.

GPU Role

The NVIDIA GeForce RTX 4070 is respons the frame pacing. It packs 12 GB of GDDR6X memory on a 192-bit bus, alongside a bandwidth of 504.2 GB/s. The memory clock is 1313 MHz (21 Gbps effective), while the base GPU clock is 1920 MHz and the boost clock is 2475 MHz. The shading units count 5,888, and the texture units 184. Its FP32 throughput is 29.15 TFLOPS. These specifications lead to a measured pixel fill rate of 158.4 GPixel/s and a texture rate of 455.4 GTexel/s. The memory capacity of 12 GB is larger than the typical 8 GB of many previous-generation cards and is enough to hold the textures that Outriders might demand at 4K. The scaling observed in the FPS suggests that at 1080p Medium, the GPU is not the bottleneck, since raising the resolution to 1440p only lowered the frame rate from 214 to 155 FPS, which is a 27% drop. At 4K, the same setting yields 81 FPS, a further 33% reduction. This consistent degradation with resolution confirms a GPU-bound condition at all resolutions when preset is Medium, but the Low setting at 1440p stays at the same 207 FPS as 1080p, revealing the CPU’s limit. The GPU’s 200 W TDP and Dual‑slot design are adequate for this task. The memory bandwidth 504.2 GB/s is plausible for simultaneous geometry and texture streams. Overall, the RTX 4070 carries the load for most presets except when CPU brings the RX7’s thread count to its ceiling at 1080p Low.

FAQ

Q: What is the highest average FPS observed at 1920×1080?

A: At the Medium preset, the game reaches an average of 214 FPS, with a minimum of 182 and a maximum of 247. The Low preset is slightly lower at 207 FPS.

Q: How does the combo rank among all tested configurations in Outriders?

A: The combination of an AMD Ryzen 5 7600 and an NVIDIA GeForce RTX 4070 ranks 727 out of 3,710 tested combos, placing it in the top 20% of the dataset.

Q: At 4K resolution, which preset maintains the highest average FPS?

A: The Low preset at 3840×2160 provides an average of 112 FPS, while Medium gives 81 FPS, High 61 FPS, and Ultra 41 FPS. Medium is the best balanced choice because it sits above 60 FPS with more margin than High.

Q: What is the minimum FPS recorded for any preset at 2560×1440?

A: The minimum observed for the Medium preset at 2560×1440 is 132 FPS, with a maximum of 199 FPS. The other presets have no min/max provided in the data.

Q: Does the CPU or GPU limit Outriders at 1080p?

A: At 1080p and at Low preset, the frame rate is identical to that at 1440p (207 FPS). This indicates that the CPU is the limiter at those settings and resolutions. At 1080p Ultra, the average drops to 133 FPS, showing increased importance of the GPU.

Q: What was the GPU’s base and boost clock?

A: The GeForce RTX 4070 has a base clock of 1920 MHz and a boost clock of 2475 MHz, with 12 GB of GDDR6X memory. The game’s resolution scaling align with these specifications.