Minimum
This combination provides smooth gameplay with an average of 113 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 52 | 62 | 81 |
| 1440p QHD | 74 | 97 | 115 | 151 |
| 1080p Full HD | 115 | 150 | 179 | 234 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Minimum with AMD Ryzen 9 9950X3D + NVIDIA GeForce RTX 4060 Ti 8 GB, In-Depth Analysis
Minimum is a 2014 third-person shooter that still imposes a serious load on modern hardware, and the combination of the AMD Ryzen 9 9950X3D with the NVIDIA GeForce RTX 4060 Ti 8 GB produces a wide spread of results depending on how the game is configured. The measured frame rates across three resolutions and four quality presets show a system that is capable of high refresh rates at 1080p but begins to buckle under the demands of 4K, with the data clearly indicating where the performance ceiling lies. This analysis breaks down the scaling behavior, the optimal settings, the role of the GPU, the overall ranking of the combo, and provides a detailed look at the exact numbers.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and reveals a system that becomes progressively more GPU-bound as resolution increases, which is typical for a title like this. At 1080p with Low settings, the combo achieves an average of 234 FPS, but that figure falls to 151 FPS at 1440p and then to 81 FPS at 4K, representing a 65% reduction from the lowest resolution to the highest. This dramatic decline indicates that the GPU is the limiting factor at higher resolutions, as the CPU has ample headroom to feed frames at 1080p but the rendering load at 4K overwhelms the RTX 4060 Ti’s capabilities.
The scaling pattern is consistent across all settings presets, though the percentage drop varies with the quality level. With High settings, the transition from 1080p to 1440p results in a drop from 150 FPS to 97 FPS, a 35% decrease, while moving from 1440p to 4K drops the average from 97 FPS to 52 FPS, another 46% reduction. The Ultra preset tells a similar story, going from 115 FPS at 1080p to 74 FPS at 1440p and then down to 40 FPS at 4K, which is the lowest recorded average in the entire data set. This behavior confirms that the 4K resolution is particularly punishing, and the gap between 1080p and 1440p is smaller than the gap between 1440p and 4K, suggesting that the GPU’s memory bandwidth and pixel throughput become critical constraints at the highest resolution.
The Medium preset, which includes minimum and maximum frame rate data, provides additional insight into the scaling behavior. At 1080p Medium, the average is 179 FPS with a minimum of 152 FPS and a maximum of 206 FPS, while at 1440p Medium the average drops to 115 FPS with a range of 98 to 133 FPS. At 4K Medium, the average falls to 62 FPS with a minimum of 53 FPS and a maximum of 72 FPS, showing that not only does the average decline, but the variance also becomes more pronounced relative to the mean at higher resolutions. The data suggests that for a smooth experience at 4K, the user must accept significant compromises in quality, as even the Medium preset cannot maintain a consistent 60 FPS floor.
Settings Recommendations
The measured data points to the Medium preset as the best balance between visual fidelity and performance, particularly for users targeting higher refresh rates. At 1080p, the Medium preset delivers 179 FPS on average, which is only 55 FPS less than Low but provides substantially better image quality, while the jump to High costs 29 FPS for a marginal visual improvement. The Ultra preset at 1080p yields 115 FPS, which is still playable but represents a 36% reduction from Medium, making it a poor trade-off for the added graphical effects.
At 1440p, the Medium preset remains the sweet spot with an average of 115 FPS, which is ideal for high-refresh-rate monitors, and the minimum of 98 FPS ensures that frame pacing stays smooth. High settings at 1440p produce 97 FPS, which is still acceptable, but the drop below 100 FPS means users with 144Hz displays will notice the difference. The Low preset at 1440p hits 151 FPS, but the visual compromise is severe, and the data shows that Medium offers a far better experience for only a 24% performance penalty.
For 4K, the situation is more difficult, as no preset achieves a consistently smooth 60 FPS. The Low preset averages 81 FPS, which is the only option that clears the 60 FPS threshold, while Medium drops to 62 FPS with a minimum of 53 FPS, meaning it will dip below 60 FPS during intense scenes. High and Ultra at 4K produce 52 FPS and 40 FPS respectively, which are not recommended for competitive play. The data suggests that 4K users should either stick with Low settings for maximum frame rate or accept the occasional stutter with Medium, as the higher presets do not provide a playable experience.
GPU Role
The NVIDIA GeForce RTX 4060 Ti 8 GB is the dominant component in this pairing, and its specifications explain the observed performance patterns. The GPU features 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s of bandwidth, which is a modest configuration for 4K gaming. The core clock runs at a base of 2310 MHz with a boost of 2535 MHz, and the card has 4352 shading units, 136 texture mapping units, and 48 raster output units, along with 34 ray tracing cores and 136 tensor cores. These specifications are adequate for 1080p and 1440p gaming, but the 4K results show that the pixel rate of 121.7 GPixel/s and the texture rate of 344.8 GTexel/s are insufficient to maintain high frame rates at that resolution.
The GPU’s benchmark score in 3DMark Steel Nomad DX12 is 2913, which places it in the 19th percentile of all GPUs, and its nearest rival is the NVIDIA RTX PRO 4000 Blackwell SFF with a score of 2910 and a delta of 0.1%. The RTX 4060 Ti 16 GB version scores 2907, which is 0.2% lower, indicating that the 8 GB memory capacity does not significantly impact the raw benchmark score but may affect real-world performance in texture-heavy scenes. The data shows that the GPU is the bottleneck in this game, especially at higher resolutions, as the CPU has significantly more headroom.
The VRAM capacity of 8 GB is a concern for a 2023 GPU, and the measured results at 4K suggest that memory pressure may be contributing to the frame rate drops. While the data does not directly measure VRAM usage, the fact that the Ultra preset at 4K drops to 40 FPS, a 50% reduction from Medium, points to the GPU struggling with the increased memory demands. The GPU’s TDP of 160 W and the suggested PSU of 450 W indicate that this is a power-efficient card, but the performance ceiling is clearly defined by its memory subsystem and core configuration, not by power delivery.
How This Combo Ranks
In the database of tested combinations for Minimum, this pairing of the AMD Ryzen 9 9950X3D and the NVIDIA GeForce RTX 4060 Ti 8 GB ranks 1432 out of 3712 combos, placing it in the 61st percentile of all tested systems. This ranking reflects the GPU’s limitations, as the CPU is far more capable than the graphics card, but the overall score is dragged down by the 4K performance. The CPU alone ranks in the 95th percentile of all CPUs with an average benchmark score of 75779, while the GPU sits in the 19th percentile with a score of 2913, showing a massive imbalance in this pairing.
The CPU’s nearest rivals include the AMD Ryzen 7 PRO 9755 with an average score of 75738 and a delta of 0.1%, the AMD Ryzen 7 PRO 9755X3D at 75716 and 0.1%, the AMD EPYC 8224P at 75582 and 0.3%, and the Intel Core Ultra 9 285 at 75488 and 0.4%. These deltas are negligible, indicating that the 9950X3D is essentially tied with its closest competitors in synthetic benchmarks, but in gaming, the extra cache and clock speed may provide an advantage. The GPU’s nearest rivals are the NVIDIA RTX PRO 4000 Blackwell SFF at 2910 and 0.1%, the RTX 4060 Ti 16 GB at 2907 and 0.2%, the NVIDIA Quadro P600 at 2923 and -0.3%, and the NVIDIA GeForce RTX 4010 at 2893 and 0.7%.
The combo rank of 1432 out of 3712 indicates that there are many systems that perform better in Minimum, primarily those with more powerful GPUs. The data suggests that this pairing is well-suited for 1080p and 1440p gaming, where it can deliver high frame rates, but it is not competitive at 4K. Users looking to maximize performance in Minimum should consider a more powerful GPU, as the CPU has significant headroom that is currently being wasted by the RTX 4060 Ti’s limitations.
FAQ
Q: What is the average frame rate at 1080p with High settings?
A: The average frame rate at 1920x1080 with High settings is 150 FPS, with no minimum or maximum data provided in the pack.
Q: How does the combo perform at 4K with Low settings?
A: At 3840x2160 with Low settings, the average frame rate is 81 FPS, which is the highest recorded at that resolution across all presets.
Q: What is the minimum frame rate recorded at 1440p with Medium settings?
A: At 2560x1440 with Medium settings, the minimum frame rate is 98 FPS, with an average of 115 FPS and a maximum of 133 FPS.
Q: Which preset gives the highest average frame rate at any resolution?
A: The highest average frame rate in the entire data set is 234 FPS, achieved at 1920x1080 with Low settings.
Q: How does the GPU’s benchmark score compare to the RTX 4060 Ti 16 GB?
A: The RTX 4060 Ti 8 GB scores 2913 in 3DMark Steel Nomad DX12, which is 0.2% higher than the RTX 4060 Ti 16 GB’s score of 2907.
Q: What is the combo’s rank in the database for Minimum?
A: The combo ranks 1432 out of 3712 tested combinations, placing it in the upper half of all systems tested for this game.
Measured FPS Breakdown
At 1920x1080, the frame rates are consistently high across all presets. The Low setting delivers an average of 234 FPS, which is the best result in the entire data set. The Medium setting produces an average of 179 FPS with a minimum of 152 FPS and a maximum of 206 FPS, providing a smooth experience with good visual quality. The High setting averages 150 FPS, while the Ultra setting drops to 115 FPS, which is still playable but represents a significant step down from the other presets.
At 2560x1440, the performance remains strong but begins to show the GPU’s limits. The Low setting averages 151 FPS, which is excellent for high-refresh-rate monitors. The Medium setting averages 115 FPS with a minimum of 98 FPS and a maximum of 133 FPS, making it the recommended choice for 1440p gaming. The High setting averages 97 FPS, which is just below the 100 FPS threshold, and the Ultra setting drops to 74 FPS, which is acceptable but not ideal for competitive play.
At 3840x2160, the performance falls off dramatically, and none of the presets can maintain a consistent 60 FPS. The Low setting averages 81 FPS, which is the only preset that exceeds 60 FPS on average. The Medium setting averages 62 FPS with a minimum of 53 FPS and a maximum of 72 FPS, meaning it will experience noticeable dips below 60 FPS. The High setting averages 52 FPS, and the Ultra setting drops to 40 FPS, which is the lowest result in the entire data set. The data clearly shows that 4K gaming is not a strong suit for this combination, and users should stick to 1080p or 1440p for the best experience.
Hardware Specifications
AMD Ryzen 9 9950X3D
NVIDIA GeForce RTX 4060 Ti 8 GB
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9950X3D + NVIDIA GeForce RTX 4060 Ti 8 GB in Minimum
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 81.0 |
| 3840x2160 | Medium | 62.0 |
| 3840x2160 | High | 52.0 |
| 3840x2160 | Ultra | 40.0 |
| 2560x1440 | Low | 151.0 |
| 2560x1440 | Medium | 115.0 |
| 2560x1440 | High | 97.0 |
| 2560x1440 | Ultra | 74.0 |
| 1920x1080 | Low | 234.0 |
| 1920x1080 | Medium | 179.0 |
| 1920x1080 | High | 150.0 |
| 1920x1080 | Ultra | 115.0 |
Minimum with RTX 4060 Ti 8 GB + Other CPUs
See how Minimum performs with the same GPU but different processors.
Other Games with Ryzen 9 9950X3D + RTX 4060 Ti 8 GB
Explore FPS benchmarks for other games using this same hardware combination.