Minimum

The AMD Ryzen 7 9800X3D paired with the NVIDIA GeForce RTX 4070 Ti delivers a compelling 1080p and 1440p experience in Minimum, a 2014 third-person shooter. The data shows a system that is clearly GPU-limited at higher resolutions and settings, but with enough CPU headroom to push very high frame rates at lower graphical loads. This analysis breaks down the measured performance, contextualizes the ranking, and offers practical settings advice based solely on the benchmark results provided.

Resolution Scaling

The frame rate drop from 1080p to 4K reveals a classic GPU-bound scenario, particularly at higher settings. At Ultra settings, the average FPS falls from 161.9 at 1920x1080 to 103.1 at 2560x1440, and then sharply to 54.4 at 3840x2160. This represents a 33% decrease from 1440p to 4K, indicating that the GeForce RTX 4070 Ti's rendering capabilities are the primary constraint as pixel count increases.

The scaling pattern changes dramatically when looking at Low settings. Here, the 1080p result is 324.1 FPS, which drops to 212.9 at 1440p and 115.5 at 4K. The percentage drop from 1440p to 4K is roughly 46%, which is significantly steeper than the Ultra preset's drop. This suggests that at Low settings, the CPU's ability to feed frames is being taxed, and the resolution increase places an even heavier load on the GPU, creating a bottleneck that amplifies the performance hit.

The Medium preset tells a similar story. It starts at 248.7 FPS at 1080p, falls to 158.6 at 1440p, and bottoms out at 86.5 at 4K. The 1440p to 4K reduction is about 45%, aligning closely with the Low preset's scaling. This consistency across lower settings underscores that the RTX 4070 Ti's memory bandwidth and shading power are the limiting factors when the CPU is not the primary bottleneck. The High preset, with 212.9 FPS at 1080p and 136.4 at 1440p, shows a 36% drop to 4K, again pointing to the GPU as the dominant constraint. The data indicates that for a consistent 60+ FPS experience at 4K, users must sacrifice settings, while 1440p offers a much wider performance envelope.

How This Combo Ranks

In the database of tested combinations for Minimum, this specific pairing of the Ryzen 7 9800X3D and RTX 4070 Ti holds the 206th position out of 1733 total combos. This places it in the top 12% of all tested systems, which is a strong showing for a high-end desktop configuration. The percentile ranking for the CPU alone is 90, meaning it outperforms 90% of all processors in the database, while the GPU sits at the 85th percentile.

The combo's rank is likely influenced by the game's age and its ability to scale with high core counts and fast single-thread performance. The Ryzen 7 9800X3D's benchmarks, including a Cinebench R23 multicore score of 34004 and a single-core score of 4800, suggest it is not the limiting factor in most scenarios. The RTX 4070 Ti's Passmark G3D score of 31624 is respectable, but the system's overall position suggests that while it is a high performer, there are many other combos with more powerful GPUs that achieve higher average frame rates, especially at 4K Ultra. The ranking indicates a balanced system that excels at high refresh rate 1080p and 1440p gaming, rather than being an absolute top-tier 4K contender.

CPU Role

The Ryzen 7 9800X3D is an 8-core, 16-thread processor based on the Zen 5 architecture, codenamed Granite Ridge, and built on a 4 nm process. It features a base clock of 4.70 GHz and a boost clock of 5.20 GHz. Its substantial 96 MB of shared L3 cache is a key asset for gaming workloads. The benchmark data shows a strong multithreaded performance with a Cinebench R23 multicore score of 34004, while the single-core score of 4800 highlights its excellent per-thread capability.

In Minimum, the CPU's role is most evident in the 1080p Low preset, where the system achieves 324.1 FPS. This high frame rate is a direct result of the CPU's ability to process game logic and draw calls quickly. However, the GPU's performance ceiling is still the limiting factor, as the 1080p High preset drops to 212.9 FPS. The 16 threads are likely well-utilized in a modern shooter, but the game's 2014 release date means it may not scale perfectly across all cores. The 3DMark 16-thread score of 10081, compared to the max-thread score of 10067, shows near-perfect scaling, indicating the processor can handle heavily threaded workloads. For this game, the 9800X3D provides ample headroom, ensuring that the GPU is almost always the bottleneck, which is the ideal scenario for consistent frame pacing.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance across resolutions and settings.

1920x1080: The Low preset delivers an average of 324.1 FPS. Medium reduces this to 248.7 FPS, while High is at 212.9 FPS. The Ultra preset is the most demanding, with an average of 161.9 FPS. All 1080p results are well above 144 Hz, making this resolution ideal for high-refresh-rate monitors.

2560x1440: At 1440p, the Low preset achieves 212.9 FPS. Medium sees a significant drop to 158.6 FPS. The High preset averages 136.4 FPS, and Ultra falls to 103.1 FPS. These figures show that 1440p is a sweet spot for this combo, with all but the Ultra preset comfortably exceeding 120 FPS.

3840x2160: The 4K results are the most demanding. Low settings produce an average of 115.5 FPS, which is still playable on high-refresh displays. Medium drops to 86.5 FPS, and High to 75.6 FPS. The Ultra preset averages 54.4 FPS, which is on the edge of smooth gameplay for many users. The data shows a steep performance cliff at 4K Ultra, emphasizing the GPU's limitations at this resolution.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture using a 5 nm process. It features 12 GB of GDDR6X memory on a 192-bit bus, providing a bandwidth of 504.2 GB/s. The GPU has a boost clock of 2610 MHz and a base clock of 2310 MHz. With 7680 shading units, it delivers a FP32 performance of 40.09 TFLOPS.

The GPU's role is clearly defined by the resolution scaling data. In 1080p, the frame rates are high but still limited by the GPU's rendering pipeline. The 324.1 FPS at Low settings indicates the GPU can handle a massive number of frames, but the drop to 161.9 FPS at Ultra settings shows the cost of higher fidelity. At 4K, the GPU becomes the definitive bottleneck. The 54.4 FPS at Ultra is a direct result of the memory bandwidth and fill rate limitations. The 12 GB of VRAM is adequate for this game, but the 192-bit bus width and 504.2 GB/s bandwidth are not sufficient for 4K Ultra settings. The RTX 4070 Ti's Passmark G3D score of 31624 places it in the 85th percentile of all GPUs, but its performance in this title at 4K is constrained. The data suggests the GPU is best utilized at 1440p or lower, where it can fully leverage its processing power without being overwhelmed by pixel throughput.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and refresh rate.

For 1920x1080, the Ultra preset is the best choice for visual fidelity, as it still maintains an average of 161.9 FPS. This is more than sufficient for any high-refresh-rate monitor. If you have a 240 Hz or higher display, the High preset at 212.9 FPS or Medium at 248.7 FPS would be better options. The Low preset at 324.1 FPS is only useful for competitive play where every frame counts, but the visual compromise is significant.

For 2560x1440, the High preset at 136.4 FPS is the recommended balance. It provides a strong visual experience while staying above the 120 FPS threshold for smooth gameplay. The Medium preset at 158.6 FPS is a better choice for 144 Hz monitors, offering a noticeable FPS boost with minimal visual loss. The Ultra preset at 103.1 FPS is playable but may not be ideal for fast-paced action. Low at 212.9 FPS is overkill unless you have a 240 Hz 1440p display.

For 3840x2160, the Low preset at 115.5 FPS is the only option that guarantees a high-refresh experience. Medium at 86.5 FPS is good for 60-90 Hz displays. High at 75.6 FPS is playable, but the Ultra preset at 54.4 FPS should be avoided if you are sensitive to frame drops. In summary, for the best overall experience at 1440p, select the High preset. At 4K, prioritize the Low or Medium presets to maintain fluidity, and reserve Ultra for 1080p gaming.