Lockdown Protocol

The AMD Ryzen 7 5800X paired with the NVIDIA GeForce RTX 4070 Ti delivers a robust performance profile in Lockdown Protocol, with measured frame rates that scale predictably across resolutions and settings. As an FPS title, the game’s demands on both the CPU and GPU are evident in the data, showing a system that can comfortably handle high-refresh-rate 1080p and 1440p play, while still providing a playable 4K experience. This analysis breaks down the measured results, contextualizes them against hardware rivals, and provides clear guidance on optimal settings based on the recorded data.

Resolution Scaling

The measured FPS data reveals a clear and consistent trend as resolution increases from 1920x1080 to 3840x2160, indicating a shift in the primary performance limiter. At 1080p with Low settings, the combo achieves a peak average of 269.6 FPS, but this drops to 90.8 FPS at 4K High. The scaling from 1080p to 1440p at High settings shows a reduction from 189.7 FPS to 142.0 FPS, a 25% decrease. Moving from 1440p to 4K at the same High preset, the average FPS falls from 142.0 to 90.8, a more substantial 36% drop. This pattern strongly suggests that at 1080p, the CPU is the limiting factor, as the GPU has ample headroom to render frames quickly, but the processor cannot feed it fast enough to reach its full potential. At 4K, the GPU becomes the bottleneck, as the increased pixel count places a much heavier load on the graphics card, causing frame rates to scale down in line with the added rendering work.

The trend is even more pronounced when examining the Low preset. At 1080p Low, the average is 269.6 FPS, which drops to 221.6 FPS at 1440p (an 18% reduction) and further to 147.6 FPS at 4K (a 33% reduction from 1440p). The diminishing returns between 1080p and 1440p at Low settings highlight the CPU limitation, as the GPU is not being fully utilized at the lower resolution. Conversely, the larger relative drop between 1440p and 4K indicates the GPU’s rendering workload is scaling as expected. For the Ultra preset, the pattern holds, with a 141.6 FPS average at 1080p, 103.8 FPS at 1440p, and 66.4 FPS at 4K. The data shows that this component pairing is well-balanced for 1440p gaming, where the CPU and GPU workloads are more evenly matched, while 1080p leaves performance on the table due to the CPU ceiling.

GPU Role

The NVIDIA GeForce RTX 4070 Ti, built on the Ada Lovelace architecture, plays a central role in determining the frame rates at higher resolutions. With 12 GB of GDDR6X memory on a 192-bit bus, the card provides a memory bandwidth of 504.2 GB/s, which is sufficient for the texture and geometry data of Lockdown Protocol at 4K. The GPU’s boost clock of 2610 MHz, combined with its 7680 shading units, delivers the raw compute power needed to push high pixel counts. In the measured data, the GPU’s influence is most apparent at 4K, where the average FPS at High settings (90.8) is less than half of the 1080p Low result (269.6). This indicates that the GPU is the dominant constraint at 4K, as it must process four times the pixels of 1080p.

The GPU’s performance relative to its close rivals, as indicated by the nearestRivals data, shows a mixed picture. The RTX 4070 Ti has an average benchmark score of 44900, placing it 0.6% behind the NVIDIA GeForce RTX 5090 Mobile (45152) and 1.5% behind the Intel Arc A730M (45592). However, it is 1.6% ahead of the AMD Radeon Pro 580 (44195) and 1.6% ahead of the AMD Radeon Pro 5500 XT (45642, which is actually higher, indicating a 1.6% deficit). The percentileVsAllGpus score of 85 signifies that the RTX 4070 Ti outperforms 85% of all GPUs in the database, confirming its high-end standing. In Lockdown Protocol, the GPU’s capability is reflected in the ability to maintain playable frame rates at 4K across all settings, even if the Ultra preset dips to 66.4 FPS, which is still above the threshold for smooth gameplay in many titles.

CPU Role

The AMD Ryzen 7 5800X, a Zen 3 architecture processor with 8 cores and 16 threads, is the other half of this pairing. Its base clock of 3.80 GHz and boost clock of 4.70 GHz provide strong single-thread performance, which is critical for FPS games that often rely heavily on a few cores. The CPU’s 32 MB of L3 cache helps reduce memory latency, improving game performance. The benchmark data shows the 5800X achieves a 3dmark_single_thread score of 943 and a cinebench_r23_singlecore score of 3327, indicating solid single-core capability. In Lockdown Protocol, the CPU’s role is most evident at 1080p, where the frame rates are highest. The fact that the 1080p Low average (269.6 FPS) is only slightly higher than the 1440p Low average (221.6 FPS) suggests that the CPU is unable to push frame rates much beyond the 270 FPS mark, even when the GPU is underutilized.

When comparing the 5800X to its nearest rivals, the data shows a tight grouping. The 5800X has an average benchmark score of 27606, which is 0.3% higher than the AMD Ryzen 7 5800 (27535) and 0.4% higher than the AMD Ryzen 5 8500GE (27708, indicating a 0.4% deficit). It also sits 0.4% ahead of the Intel Core i7-13700H (27716) and 0.8% ahead of the Intel Core i5-12600KF (27827). The percentileVsAllCpus score of 84 places it in the top 16% of all CPUs. This performance level is adequate to feed the RTX 4070 Ti at 1440p without creating a significant bottleneck, but at 1080p, the CPU becomes the limiting factor, as evidenced by the relatively small frame rate gains when lowering resolution from 1440p to 1080p across all settings.

Measured FPS Breakdown

The measured FPS data provides a detailed look at performance across all combinations of resolution and settings. At 1920x1080, the results range from a high of 269.6 FPS on Low to a low of 141.6 FPS on Ultra. The High and Medium presets fall in between, with 189.7 FPS and 215.8 FPS, respectively. These numbers indicate that at 1080p, even the Ultra preset delivers a frame rate well above 144 Hz, making it suitable for high-refresh-rate monitors. Moving to 2560x1440, the averages are 221.6 FPS (Low), 158.9 FPS (Medium), 142.0 FPS (High), and 103.8 FPS (Ultra). This resolution offers a sweet spot, where the High preset still exceeds 140 FPS, and even Ultra remains above the 100 FPS mark.

At 3840x2160, the performance drops significantly. The Low preset averages 147.6 FPS, which is still very playable. The Medium preset drops to 105.0 FPS, High to 90.8 FPS, and Ultra to 66.4 FPS. The 4K results show that the GPU is the primary constraint, with the gap between Low and Ultra being substantial (81.2 FPS). The scaling between settings at 4K is also less linear than at lower resolutions, with Medium offering a 14.2 FPS improvement over High (105.0 vs 90.8), while Ultra is 24.4 FPS slower than High. This data suggests that for 4K, users will need to make a trade-off between visual fidelity and frame rate, with the High preset providing a balanced 90.8 FPS average.

How This Combo Ranks

In the overall database of tested hardware combinations, this pairing of the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 4070 Ti ranks 223rd out of 1637 combos in Lockdown Protocol. This places it in the top 13.6% of all tested systems, indicating a high-performance configuration. The combo’s rank is a reflection of the CPU and GPU’s combined capabilities; the 5800X’s strong single-thread performance and the RTX 4070 Ti’s high-end rendering power work together to produce excellent frame rates. The rank is particularly impressive given that the CPU is from the 5000 series, which launched with a launch MSRP of $449, while the GPU is from the 40-series, with a launch MSRP of 799 USD.

Relative to other combos, this system is positioned well above the average, but it is not at the absolute top. The gap to the 1st place combo is likely filled by systems with more recent, higher-core-count CPUs and top-tier GPUs like the RTX 4090. However, for the specific hardware in this pairing, the 223rd rank out of 1637 is a strong showing, confirming that it is a capable gaming platform for Lockdown Protocol. The benchmark results indicate that this combo delivers a consistently high frame rate experience, especially at 1080p and 1440p, which aligns with its high percentile rankings for both the CPU (84th) and GPU (85th).

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user’s target resolution and refresh rate. For 1920x1080, the Ultra preset is recommended, as it still achieves an average of 141.6 FPS, which is suitable for 144 Hz displays. The High preset (189.7 FPS) and Medium preset (215.8 FPS) are also excellent choices for those with higher refresh rate monitors (240 Hz), but the visual quality gains from Ultra are worth the modest frame rate drop. For 2560x1440, the High preset is the best choice, delivering a 142.0 FPS average, which is ideal for 144 Hz monitors. The Medium preset (158.9 FPS) offers a slight FPS boost for 165 Hz displays, while the Ultra preset (103.8 FPS) is still viable for 100 Hz+ monitors but may not be worth the visual quality trade-off.

For 3840x2160, the recommendation is more nuanced. The Medium preset (105.0 FPS) provides the best balance of visual quality and performance, as it is above the 60 FPS threshold for smooth gameplay and offers a significant improvement over the Low preset (147.6 FPS) in terms of graphical detail. The High preset (90.8 FPS) is also playable, but the drop from Medium to High is only 14.2 FPS, while the visual difference may be less noticeable. The Ultra preset (66.4 FPS) is only recommended for users who prioritize maximum visual fidelity over frame rate, as it is still above 60 FPS but leaves little headroom for demanding scenes. In summary, the data suggests that this combo is best utilized at 1440p High or 1080p Ultra for a high-refresh-rate experience, while 4K users should stick to Medium or High settings to maintain a smooth frame rate.