Lockdown Protocol

Lockdown Protocol places the AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 4060 Ti 8 GB combination in the 721st position out of 1637 tested combos. This places the pairing in the upper-middle tier of the database, meaning it outperforms a majority of systems while still leaving headroom above it. The percentile data for the individual components supports this placement: the CPU sits at the 82nd percentile among all processors, while the GPU is at the 17th percentile among all graphics cards. The combination’s overall rank reflects a system where the processor is the stronger partner, a dynamic that becomes evident when examining frame rates across different resolutions and settings.

How This Combo Ranks

The combo’s rank of 721 out of 1637 is not a top-tier placement, but it is a solidly competitive one. The CPU’s 82nd percentile standing is the primary driver of this position. In contrast, the GPU’s 17th percentile ranking is notably lower, indicating that the graphics card is the limiting factor in most scenarios. The data shows a pairing where the Ryzen 7 5700X3D’s 8 cores and 16 threads provide ample processing headroom, but the RTX 4060 Ti’s 8 GB of VRAM and 128-bit memory bus constrain how far that headroom can be pushed. This mismatch is typical of mid-range builds, and the measured FPS numbers confirm that the GPU dictates the ceiling in Lockdown Protocol, especially at higher settings.

GPU Role

The NVIDIA GeForce RTX 4060 Ti 8 GB is built on the Ada Lovelace architecture with a 5 nm process and 22,900 million transistors. Its memory configuration is the most critical factor for this game: 8 GB of GDDR6 on a 128-bit bus yields a bandwidth of 288.0 GB/s. This is a modest amount of VRAM by modern standards, and the data suggests it becomes a bottleneck in Lockdown Protocol. The GPU’s base clock is 2310 MHz with a boost clock of 2535 MHz, and it has 4352 shading units. The benchmark score for this GPU is 2913 on the 3DMark Steel Nomad DX12 test, which places it at the 17th percentile. Its nearest rival, the NVIDIA GeForce RTX 4060 Ti 16 GB, scores 2907, a delta of only 0.2 percent, showing that the extra VRAM does little for raw compute performance but may affect texture handling in specific titles. The 8 GB model’s role here is to provide playable frame rates, but the measured data shows it struggles to maintain high averages at Ultra settings, likely due to memory capacity rather than raw shader throughput.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, revealing the GPU as the limiting component. At Low settings, the average frame rate falls from 217.5 FPS at 1920x1080 to 102.3 FPS at 3840x2160, a reduction of over 50 percent. At High settings, the drop is from 133.8 FPS to 65.2 FPS, a similar proportional decline. This scaling pattern indicates that the CPU is not the bottleneck at lower resolutions; if it were, the frame rates would plateau rather than scale with resolution. The RTX 4060 Ti’s 8 GB VRAM and 288.0 GB/s bandwidth are insufficient to maintain high throughput at 4K, particularly when texture and geometry demands increase. The data shows that 1080p is the sweet spot for this combo, while 4K is only viable at Low or Medium settings.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings yield an average of 217.5 FPS, Medium produces 155.2 FPS, High reaches 133.8 FPS, and Ultra drops to 103.0 FPS. These numbers show a clear progression where the GPU can handle the load at lower presets, but the gap between Low and Ultra is over 100 FPS, indicating that the graphics card is heavily taxed by higher-quality effects. At 2560x1440, the averages are 163.4 FPS for Low, 112.4 FPS for Medium, 97.7 FPS for High, and 72.9 FPS for Ultra. The drop from 1080p to 1440p is roughly 25 percent at each setting, which is expected for a mid-range GPU. At 3840x2160, the numbers fall further: 102.3 FPS for Low, 76.2 FPS for Medium, 65.2 FPS for High, and 47.2 FPS for Ultra. The Ultra result at 4K is below the 60 FPS threshold, making it unsuitable for smooth gameplay, while Low at 4K remains playable. The data indicates that the RTX 4060 Ti is best utilized at 1080p or 1440p, with 4K reserved for less demanding presets.

CPU Role

The AMD Ryzen 7 5700X3D is a Zen 3 part on the 7 nm process, featuring 8 cores and 16 threads. Its base clock is 3.00 GHz with a boost clock of 4.10 GHz, and it has a large 96 MB shared L3 cache, which is beneficial for gaming workloads. The CPU’s benchmark scores support its strong position: a Cinebench R23 multicore score of 22366 and a single-core score of 3157. In the 3DMark 16-thread test, it scores 6764, and in the max-thread test, 6755, showing consistent scaling. The CPU’s nearest rival, the Intel Core i7-1360P, has an average score of 24627, a delta of 0.2 percent, meaning the 5700X3D is nearly identical in overall performance. The AMD Ryzen 5 7600X3D is also close with a 0.3 percent delta, while the Intel Core i5-11600 is 0.5 percent behind. This indicates that the CPU is not the weak link in this combo. In Lockdown Protocol, the data shows that the CPU can feed the GPU adequately at 1080p, as evidenced by the high frame rates at Low settings, but it cannot compensate for the GPU’s limitations at higher resolutions. The 5700X3D’s 105 W TDP and DDR4 support make it a practical choice, but its performance is largely untapped in this pairing due to the GPU’s constraints.

Settings Recommendations

Based on the measured FPS rows, the optimal settings depend on the target resolution and desired smoothness. At 1920x1080, High settings provide an average of 133.8 FPS, which is well above the 60 FPS threshold and offers a good balance between visual quality and performance. Ultra at this resolution delivers 103.0 FPS, which is still playable, but the 30 FPS difference between High and Ultra suggests diminishing returns. For competitive play, Low at 217.5 FPS is the best choice for maximum responsiveness. At 2560x1440, High settings average 97.7 FPS, which is smooth for most players, while Ultra drops to 72.9 FPS, still above 60 but with less headroom. Medium at 112.4 FPS is a safer bet for maintaining high frame rates with decent visuals. At 3840x2160, the data shows that only Low settings at 102.3 FPS are recommended for consistent performance. Medium at 76.2 FPS is borderline, and High at 65.2 FPS is just above playable, but Ultra at 47.2 FPS is too low for a good experience. The pattern is clear: the RTX 4060 Ti’s 8 GB VRAM and bandwidth limit the combo to 1080p High or 1440p Medium for a balanced experience, with 4K reserved for Low presets. The CPU’s strength does not translate into higher FPS at higher settings, as the GPU becomes the primary constraint.