Lockdown Protocol

Lockdown Protocol places the AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3080 combination in the 475th position out of 1637 tested configurations. This places the pairing firmly in the upper quartile of systems, with the CPU ranking in the 83rd percentile and the GPU in the 80th percentile among their respective components. The measured data reveals a system that is consistently capable at high refresh rates, though the scaling patterns show where each component's influence begins and ends.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 produces a predictable but steep decline in frame rates across all settings. At Low settings, the average FPS drops from 248.5 at 1080p to 116.6 at 4K, representing a 53% reduction. The drop becomes more pronounced at Ultra settings, where the system falls from 116.5 FPS at 1080p to 57.7 FPS at 4K, a 50.5% reduction. This consistent halving of performance across the resolution spectrum indicates that the RTX 3080's rendering load is scaling nearly linearly with pixel count, which is the expected behavior for a GPU-bound scenario at higher resolutions.

The gap between High and Ultra settings widens as resolution increases. At 1080p, the difference between High and Ultra is 40.8 FPS (157.3 vs 116.5). At 1440p, that gap narrows slightly to 23.9 FPS (111.9 vs 88). At 4K, the difference compresses further to 17.2 FPS (74.9 vs 57.7). This compression suggests that at 4K Ultra, the system is approaching the limits of what the RTX 3080 can sustain, and the additional pixel workload from Ultra settings begins to overwhelm the GPU's 10 GB of GDDR6X memory and 760.3 GB/s bandwidth.

The scaling from 1080p to 1440p at Medium settings shows a 49.5 FPS drop (177.2 to 127.7), while the 1440p to 4K transition at the same settings costs 41.1 FPS (127.7 to 86.6). The fact that these two transitions are relatively similar in magnitude indicates that the GPU is the primary limiter at Medium settings, with the CPU's 6 cores and 12 threads providing sufficient headroom even at 1080p. At Low settings, the 1080p to 1440p drop of 63.1 FPS (248.5 to 185.4) is the largest single-step decline in the dataset, suggesting that at lower graphical loads, the RTX 3080's architecture is being pushed to its pixel throughput limits.

CPU Role

The Ryzen 5 7600X operates with a base clock of 4.70 GHz and a boost clock of 5.30 GHz, built on the Zen 4 architecture with a 5 nm process. Its 6 cores and 12 threads are arranged with 64 KB of L1 cache per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. In synthetic benchmarks, the CPU achieves a Cinebench R23 multicore score of 24128 and a single-core score of 3406, with a 3DMark max-threads score of 6845. These figures place it in the 83rd percentile of all CPUs, with its closest rival being the AMD Ryzen 7 5700X, which scores 0.2% higher on average.

The benchmark data shows that the CPU is not the bottleneck in Lockdown Protocol at any tested resolution or setting. At 1080p Low, the system reaches 248.5 FPS, which is well below the CPU's theoretical ceiling given its 3DMark single-thread score of 1060 and PassMark single-thread score of 4135. The fact that the 1080p to 1440p scaling at Low settings produces a 63.1 FPS drop, while the 1440p to 4K scaling at the same settings only costs 68.8 FPS, indicates that the GPU is being saturated even at lower resolutions.

The CPU's memory bandwidth of 83.2 GB/s over a dual-channel DDR5 bus provides adequate feeding for the GPU's 10 GB frame buffer. The 32 MB L3 cache is shared across all 6 cores, which helps maintain consistent frame delivery in a fast-paced FPS title where draw calls and physics calculations are distributed unevenly across frames. The Ryzen 5 7600X's position relative to the AMD Ryzen 7 PRO 6850U (0% delta) and AMD Ryzen 7 7735U (-0.1% delta) shows that its multi-threaded performance is competitive with higher-core mobile parts, but in Lockdown Protocol, the desktop CPU's higher boost clock provides the single-thread headroom that FPS titles typically favor.

GPU Role

The RTX 3080 features 8704 shading units, 272 texture mapping units, and 96 ROPs, operating at a base clock of 1440 MHz and a boost clock of 1710 MHz. Its 10 GB of GDDR6X memory runs at 19 Gbps effective, delivering 760.3 GB/s of bandwidth across a 320-bit bus. The GPU's FP32 throughput of 29.77 TFLOPS and texture rate of 465.1 GTexel/s are the primary drivers of the frame rates observed in Lockdown Protocol. In 3DMark Steel Nomad DX12, the card scores 4407, and in PassMark G3D, it reaches 25086, placing it in the 80th percentile of all GPUs.

The data shows the RTX 3080 is firmly in control of the frame rate at all measured points. At 4K Ultra, the system produces 57.7 FPS, which is the lowest recorded average. The GPU's nearest rival, the AMD Radeon RX 7900 GRE, scores 0.9% higher on average, but the RTX 3080's 68 RT cores and 272 tensor cores provide dedicated hardware for any ray-traced effects that Lockdown Protocol might employ, even though the measured data does not specify whether RT is enabled.

The GPU's memory configuration becomes relevant at 4K Ultra, where the 10 GB VRAM capacity is likely being taxed by high-resolution textures. The 4K Ultra average of 57.7 FPS, compared to 4K High at 74.9 FPS, suggests that the additional 17.2 FPS cost of Ultra settings is disproportionately high relative to the visual improvements. The GPU's dual-slot design and 320 W TDP indicate a card that requires substantial power delivery, though the measured data does not include power consumption figures. The 700 W suggested PSU and 1x 12-pin power connector are the only power-related specifications available.

Measured FPS Breakdown

At 1920x1080, the system delivers 248.5 FPS on Low, 177.2 FPS on Medium, 157.3 FPS on High, and 116.5 FPS on Ultra. The gap between Low and Medium is 71.3 FPS, while the gap between Medium and High is 19.9 FPS, and the High to Ultra gap is 40.8 FPS. This pattern suggests that Low settings remove enough graphical overhead to let the RTX 3080 run near its pixel throughput limits, while Ultra introduces effects that heavily tax the GPU.

At 2560x1440, the averages are 185.4 FPS on Low, 127.7 FPS on Medium, 111.9 FPS on High, and 88 FPS on Ultra. The Low to Medium drop is 57.7 FPS, which is proportionally similar to the 1080p drop. The High to Ultra gap narrows to 23.9 FPS, indicating that at 1440p, the GPU is starting to become the limiting factor for the higher preset tiers.

At 3840x2160, the system produces 116.6 FPS on Low, 86.6 FPS on Medium, 74.9 FPS on High, and 57.7 FPS on Ultra. The Low to Medium drop is 30 FPS, the Medium to High drop is 11.7 FPS, and the High to Ultra drop is 17.2 FPS. The 4K Ultra result of 57.7 FPS is the only measured average below the 60 FPS threshold, indicating that this is the only configuration where the system falls short of a smooth 60 FPS experience.

FAQ

Q: Can this system run Lockdown Protocol at 4K with playable frame rates?

A: Yes, at 4K High settings the system averages 74.9 FPS, which is above the 60 FPS threshold for smooth gameplay. At 4K Ultra, the average drops to 57.7 FPS, which may be acceptable but is below 60 FPS.

Q: What is the best resolution for competitive play with this hardware?

A: At 1080p Low settings, the system achieves 248.5 FPS, which is the highest measured average. Even at 1080p Ultra, it maintains 116.5 FPS, providing ample headroom for high-refresh-rate monitors.

Q: How does the RTX 3080 compare to its closest rival in this configuration?

A: The RTX 3080's average benchmark score of 35787 is 0.9% lower than the AMD Radeon RX 7900 GRE and 0.2% lower than the AMD Radeon Pro Duo, but 0.4% higher than the AMD Radeon 880M and 1% higher than the NVIDIA GeForce RTX 5070 Ti Mobile.

Q: Is the Ryzen 5 7600X holding back the RTX 3080 in this game?

A: The data indicates no CPU bottleneck. Even at 1080p Low with 248.5 FPS, the CPU's 3DMark single-thread score of 1060 and Cinebench R23 single-core score of 3406 suggest it has headroom for higher frame rates.

Q: What is the performance difference between Medium and High settings?

A: At 1080p, the difference is 19.9 FPS (177.2 vs 157.3). At 1440p, it is 15.8 FPS (127.7 vs 111.9). At 4K, it is 11.7 FPS (86.6 vs 74.9). The gap narrows as resolution increases.

Q: How does this system rank among all tested configurations?

A: The combination ranks 475th out of 1637 tested combos, placing it in the top 29% of all systems tested for Lockdown Protocol.

Settings Recommendations

The data points to 1440p High as the most balanced configuration for this hardware. At 111.9 FPS, it provides a comfortable margin above the 100 FPS mark while delivering the visual fidelity that High settings offer. The 1440p Medium preset at 127.7 FPS is also viable for players who prioritize frame rate over visual quality, offering a 15.8 FPS advantage over High.

For competitive play, 1080p Low at 248.5 FPS is the clear choice. This configuration maximizes the system's frame rate potential and provides the lowest input latency, which is critical in a fast-paced FPS. The 1080p Medium preset at 177.2 FPS is a reasonable compromise for players who want some visual improvements without sacrificing the high refresh rate.

At 4K, the Ultra preset at 57.7 FPS is the only measured configuration that falls below 60 FPS. Players with 4K displays should use High settings at 74.9 FPS for a smoother experience, or Medium at 86.6 FPS if they prefer a larger frame rate buffer. The 4K Low preset at 116.6 FPS is the best option for players who want 4K resolution but prioritize performance, though it sacrifices most graphical enhancements. The data shows that the RTX 3080's 10 GB VRAM and 760.3 GB/s bandwidth are sufficient for 4K High, but Ultra settings push the GPU to its limits.