Lockdown Protocol

The AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 4070 Ti SUPER combination delivers a robust performance profile in Lockdown Protocol, with the data indicating a system that scales predictably across resolutions and settings. The measured frame rates show a clear priority on GPU throughput at higher resolutions, while the CPU’s capabilities become more apparent at lower settings where frame rates reach their peak. The following analysis breaks down the measured results, contextualizing the hardware’s behavior within the tested scenarios.

Resolution Scaling

The frame rate data reveals a classic scaling pattern where the performance cost of higher resolutions is significant but not prohibitive. At 1080p with Low settings, the system achieves an average of 275 FPS. Moving to 1440p Low drops that average to 225 FPS, a reduction of 50 FPS or roughly 18%. At 4K Low, the average falls further to 145 FPS, which is 130 FPS below the 1080p result. This pattern indicates that at Low settings, the GPU is still the primary limiter, but the CPU is capable of feeding it enough data to maintain high frame rates even at 4K.

The scaling across the High preset shows a similar trend but with a more pronounced drop at the highest resolution. At 1080p High, the average is 191 FPS. At 1440p High, it is 140 FPS, a 51 FPS decrease. At 4K High, the average is 90 FPS, which is 101 FPS below the 1080p High figure. This steeper decline from 1440p to 4K suggests that the demands on the GPU’s memory bandwidth and compute units increase substantially at 2160p, making the graphics card the definitive bottleneck in this configuration.

The Medium preset data further clarifies the limiting component. At 1080p Medium, the average is 218 FPS with a minimum of 186 FPS and a maximum of 251 FPS. At 1440p Medium, the average is 160 FPS (min 136, max 184), and at 4K Medium, it is 103 FPS (min 88, max 119). The consistent drop in average FPS from 1080p to 1440p (58 FPS) and from 1440p to 4K (57 FPS) shows an almost linear relationship with pixel count. This linearity is a strong indicator that the system is GPU-bound across the Medium preset, as the CPU is not introducing a variable that would cause non-linear scaling.

The Ultra preset shows the lowest frame rates, with an average of 143 FPS at 1080p, 105 FPS at 1440p, and 68 FPS at 4K. The difference between 1080p and 1440p Ultra is 38 FPS, and between 1440p and 4K Ultra is 37 FPS. This consistent delta suggests that even at Ultra settings, the scaling remains predictable. The fact that the 4K Ultra average of 68 FPS is still playable indicates that the RTX 4070 Ti SUPER has sufficient headroom to handle the most demanding preset, though it does not maintain the high refresh rates seen at lower settings.

Overall, the data points to the GPU as the primary performance limiter across all tested resolutions. The CPU’s influence is more visible at 1080p Low where the 275 FPS average approaches the upper limits of what many displays can show, but the consistent scaling at Medium and High presets confirms that the graphics card’s workload is the deciding factor.

CPU Role

The AMD Ryzen 5 7500X3D is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture with a 5 nm process. Its base clock is 4.00 GHz with a boost clock of 4.50 GHz, and it features a substantial 96 MB of shared L3 cache. This processor is designed to minimize latency, which is crucial for frame pacing in fast-paced FPS titles.

In the measured data, the CPU’s role is most evident at the lower resolution and settings where the frame rate ceiling is highest. At 1080p Low, the system hits 275 FPS, which is a demanding scenario for any processor. The 7500X3D’s high cache capacity and boost clock allow it to keep up with the GPU’s output, preventing a CPU bottleneck that would otherwise cap the frame rate. The scores from the Passmark suite, such as 25047 for multi-thread and 3494 for single-thread, indicate a balanced processor that excels in both lightly-threaded and multi-threaded workloads.

Compared to its nearest rivals, the 7500X3D’s average benchmark score of 44573 places it in a tight competition. It sits 0.2% above the Intel Core Ultra X9 388H and 0.5% above the Intel Core i9-13950HX, while being 0.7% behind the Intel Core i5-14600. These small deltas suggest that in synthetic tests, the processor is broadly equivalent to these competitors. However, in Lockdown Protocol, the actual performance is dictated by the game’s engine and how it utilizes the CPU’s cache and core count.

The 96 MB L3 cache is a standout feature that likely contributes to the system’s ability to maintain high frame rates at 1080p. The processor’s 65 W TDP also indicates that it operates within a power envelope that does not require exotic cooling, allowing the focus to remain on the GPU. The data shows that the CPU is not the limiting factor in any of the tested configurations, as the frame rates scale consistently with resolution changes, which is a hallmark of a GPU-bound system. The CPU’s percentile ranking of 89 against all CPUs further confirms its high-end positioning.

GPU Role

The NVIDIA GeForce RTX 4070 Ti SUPER is a substantial graphics card built on the Ada Lovelace architecture with a 5 nm process. It features 16 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 672.3 GB/s. The card’s boost clock is 2610 MHz, and it contains 8448 shading units, 264 texture mapping units, and 96 raster output units.

The GPU’s role in the measured results is dominant. At 4K Ultra, the average FPS drops to 68, which is the lowest score in the dataset. This figure illustrates the immense computational load placed on the GPU at this resolution and preset. The card’s 16 GB VRAM is a key asset here, as it allows the game to store high-resolution textures without spilling over into slower system memory, which would cause stutters and frame drops. The 672.3 GB/s bandwidth ensures that the GPU can feed its cores with data quickly, which is critical for maintaining the consistent frame times seen in the Medium preset results.

The RTX 4070 Ti SUPER’s performance is reflected in its Passmark G3D score of 31811, which places it in the 76th percentile of all GPUs. However, its nearest rivals in the benchmark database are the NVIDIA Quadro M5000 (31206, -0.4%), the NVIDIA GRID M60-1Q (31220, -0.4%), the NVIDIA RTX PRO 4500 Blackwell (31532, -1.4%), and the NVIDIA TITAN RTX (31676, -1.9%). These deltas are small, indicating that the 4070 Ti SUPER is closely matched with these cards in synthetic tests. In gaming, the 4070 Ti SUPER’s modern architecture and feature set likely provide an advantage in specific workloads.

The data confirms the GPU is the primary bottleneck at all resolutions. The evidence is clear in the 4K results, where the average FPS ranges from 68 at Ultra to 145 at Low. The 77 FPS spread between Low and Ultra at 4K is larger than the 54 FPS spread at 1440p (225 to 105) and the 132 FPS spread at 1080p (275 to 143). This widening spread at higher resolutions is expected, as the GPU’s workload increases exponentially with pixel count. The card’s 44.10 TFLOPS of FP32 performance is the engine driving these results, and the data shows it has enough headroom to provide a playable experience even at the most demanding settings.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500X3D and the NVIDIA GeForce RTX 4070 Ti SUPER achieves a rank of 337 out of 2828 tested combos in Lockdown Protocol. This places the system in the top 12% of all configurations, indicating a high level of performance relative to the broader database.

This ranking confirms the balance between the CPU and GPU. The CPU’s strong single-thread performance and large cache work well with the GPU’s high throughput to produce consistent frame rates. The fact that the combo ranks higher than the 89th percentile of CPUs and the 76th percentile of GPUs suggests that the pairing is synergistic, making the most of each component’s strengths.

Within the context of the measured data, this ranking is justified. The system is capable of running the game at high frame rates across all resolutions, with the weakest result being 68 FPS at 4K Ultra. This level of performance means that the combo can handle high refresh rate monitors at 1080p and 1440p, while still providing a smooth experience on 4K displays. The rank of 337 out of 2828 suggests that there are only a few hundred configurations that can outperform this one in this specific title, which is an impressive feat given the hardware’s specifications.

Measured FPS Breakdown

The dataset provides average frame rates for four settings presets (Low, Medium, High, Ultra) across three resolutions (1920x1080, 2560x1440, 3840x2160). The Medium preset also includes minimum and maximum FPS data, offering insight into frame time consistency.

At 1920x1080, the system delivers its highest average frame rates. The Low preset averages 275 FPS, which is the fastest result in the entire dataset. The Medium preset averages 218 FPS, with a minimum of 186 FPS and a maximum of 251 FPS. The High preset averages 191 FPS, and the Ultra preset averages 143 FPS. The spread from Low to Ultra is 132 FPS, showing a wide range of performance depending on the visual fidelity.

At 2560x1440, the averages are lower but still high. The Low preset averages 225 FPS, the Medium preset averages 160 FPS (min 136, max 184), the High preset averages 140 FPS, and the Ultra preset averages 105 FPS. The spread from Low to Ultra is 120 FPS. The Medium preset’s minimum of 136 FPS indicates that the system maintains a frame rate well above the 60 FPS threshold even in demanding scenes.

At 3840x2160, the averages are at their lowest. The Low preset averages 145 FPS, the Medium preset averages 103 FPS (min 88, max 119), the High preset averages 90 FPS, and the Ultra preset averages 68 FPS. The spread from Low to Ultra is 77 FPS. The Medium preset’s minimum of 88 FPS is still a playable frame rate, but the Ultra preset’s average of 68 FPS is close to the edge of what is considered smooth for a fast-paced FPS.

The data shows a consistent hierarchy: Low is always the fastest, followed by Medium, High, and then Ultra. The Medium preset’s min and max values show that the frame times are relatively stable, with a difference of 65 FPS at 1080p, 48 FPS at 1440p, and 31 FPS at 4K between the minimum and maximum. This indicates that the game’s performance is predictable and not subject to severe spikes or drops.

Settings Recommendations

Based on the measured frame rates, the Medium preset offers the most balanced experience across all resolutions. At 1080p, the Medium preset averages 218 FPS, which is high enough for any competitive display, and the minimum of 186 FPS ensures that there are no significant dips during intense action. At 1440p, the Medium preset averages 160 FPS with a minimum of 136 FPS, making it ideal for high refresh rate gaming. At 4K, the Medium preset averages 103 FPS with a minimum of 88 FPS, which is still a smooth experience for most players.

The High preset is a viable alternative for users who prioritize visual quality over raw frame rates. At 1080p, it averages 191 FPS, which is still very high. At 1440p, it averages 140 FPS, and at 4K, it averages 90 FPS. The High preset sacrifices some performance compared to Medium, but the visual fidelity improvement is often worth the trade-off for a more immersive experience.

The Ultra preset is the most demanding, with averages of 143 FPS at 1080p, 105 FPS at 1440p, and 68 FPS at 4K. While the 1080p and 1440p results are playable, the 4K average of 68 FPS is on the lower end of the spectrum for a fast-paced FPS. Players with a 4K display who prefer maximum settings may find this acceptable, but those seeking a competitive edge should consider the Medium or High presets.

The Low preset is the fastest, with averages of 275 FPS at 1080p, 225 FPS at 1440p, and 145 FPS at 4K. This preset is best suited for competitive play where frame rate is the top priority, but it comes at the cost of visual quality. For most users, the Medium preset represents the best compromise between performance and visual fidelity, as it maintains high frame rates while still rendering the game with reasonable detail.

FAQ

Q: What is the highest average frame rate recorded for this combo?

A: The highest average frame rate is 275 FPS, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 resolution with the Ultra preset, the combo averages 68 FPS. This is the lowest average in the dataset but remains a playable frame rate.

Q: What is the minimum frame rate recorded for the Medium preset at 1440p?

A: At 2560x1440 with Medium settings, the minimum frame rate is 136 FPS, with an average of 160 FPS and a maximum of 184 FPS.

Q: How does the CPU's performance compare to its nearest rival?

A: The AMD Ryzen 5 7500X3D has an average benchmark score of 44573, which is 0.2% higher than the Intel Core Ultra X9 388H and 0.5% higher than the Intel Core i9-13950HX, but 0.7% lower than the Intel Core i5-14600.

Q: Is the system CPU-bound or GPU-bound in this game?

A: The data indicates the system is GPU-bound. Frame rates scale consistently with resolution changes, which is a characteristic of a GPU-limited scenario. The CPU’s performance is sufficient to avoid bottlenecking the GPU.

Q: What is the combo's rank among all tested combinations?

A: The combo ranks 337 out of 2828 tested combinations in Lockdown Protocol, placing it in the top 12% of all systems.