Inside

Inside

AVERAGE FPS
173
excellent

This combination delivers exceptional performance with an average of 173 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 75 78 123 157
1440p QHD 117 125 197 249
1080p Full HD 162 174 276 344

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 157
3840x2160 Medium 123
3840x2160 High 78
3840x2160 Ultra 75
2560x1440 Low 249
2560x1440 Medium 197
2560x1440 High 125
2560x1440 Ultra 117
1920x1080 Low 344
1920x1080 Medium 276
1920x1080 High 174
1920x1080 Ultra 162

Inside with Intel Core i5-12600KF + AMD Radeon RX 9060 XT 8 GB, In-Depth Analysis

The data for Inside with the Intel Core i5-12600KF and AMD Radeon RX 9060 XT 8 GB shows an exceptionally strong pairing for this puzzle platformer, with performance scaling that reveals more about the CPU's headroom than the GPU's limits. The measured frame rates across all resolutions and settings are high enough to suggest that this combination will not be a bottleneck for the title's core gameplay.

FAQ

Q: What is the best performance this combination can achieve at 1080p?

A: The highest average frame rate recorded is 344.4 FPS at 1920x1080 with Low settings. Even at the most demanding Ultra preset, the combo still delivers an average of 162.4 FPS at this resolution.

Q: How does the CPU compare to its nearest rivals in overall benchmark scores?

A: The Intel Core i5-12600KF has an average benchmark score of 27827, which places it effectively in a tie with the Intel Core i9-10900K at 27829, showing a 0% delta. It is also statistically similar to the Intel Core i5-12600K, which scores 27851, a performance difference of -0.1%.

Q: What is the GPU's generation and architecture?

A: The AMD Radeon RX 9060 XT 8 GB is based on the RDNA 4.0 architecture and is part of the Radeon RX 9000 series, using the Navi 44 chip. It is manufactured on a 4 nm process by TSMC.

Q: What is the difference in performance between the High and Ultra settings at 4K?

A: At 3840x2160, the High preset yields an average of 78.3 FPS, while the Ultra preset is slightly lower at 74.5 FPS. This represents a modest performance cost for the highest quality settings.

Q: What memory bandwidth does the GPU provide?

A: The Radeon RX 9060 XT 8 GB has a memory bus width of 128 bit and a bandwidth of 322.3 GB/s, using 8 GB of GDDR6 memory.

Q: Is the benchmark data measured or estimated?

A: The data is measured. The `dataIsMeasured` field is true, indicating the frame rates are from direct testing rather than theoretical calculations.

GPU Role

The AMD Radeon RX 9060 XT 8 GB is the primary driver of frame rate differences between settings, though it has ample headroom in this title. With 8 GB of GDDR6 memory on a 128-bit bus, the card provides a 322.3 GB/s memory bandwidth. The GPU's clocks are substantial, with a base clock of 1700 MHz and a boost clock of 3130 MHz, alongside a game clock of 2530 MHz. These specifications are more than sufficient for Inside, as evidenced by the fact that even the most demanding Ultra preset at 4K resolution yields an average of 74.5 FPS.

The data suggests that the GPU is not the limiting factor at lower resolutions. At 1920x1080 with Low settings, the frame rate reaches 344.4 FPS, which is far beyond what the game's visual complexity requires. The GPU's pixel rate and texture rate, listed at 200.3 GPixel/s and 400.6 GTexel/s respectively, are more than capable of handling the game's 2D side-scrolling perspective. The transition from Medium to High settings at 1080p shows a drop from 276.3 FPS to 173.9 FPS, indicating a significant increase in shader and texture workload, but the card handles it without breaking a sweat. The GPU's performance here is consistent with its overall percentile ranking of 50, which positions it as a mid-range part that is still overkill for this specific game's demands.

Settings Recommendations

Based on the measured FPS data, the Ultra preset is the recommended choice for the best experience, as it provides the highest visual quality without sacrificing playability. At 1920x1080, Ultra averages 162.4 FPS, which is well above the threshold for smooth gameplay. Even at 2560x1440, the Ultra preset maintains an average of 116.8 FPS, making it a viable option for high-refresh-rate monitors. At 3840x2160, Ultra drops to 74.5 FPS, which is still perfectly playable for a puzzle platformer where precise timing is less critical.

For users with 4K displays who prioritize higher frame rates over absolute visual fidelity, the High preset at 78.3 FPS is a better choice than Ultra, as it offers a slight performance boost with a minor reduction in settings. The Medium preset at 123.4 FPS for 4K is the best balance for those seeking both high resolution and high refresh rates, as it provides a significant jump over High while remaining visually acceptable. The Low preset, which reaches 157 FPS at 4K and 344.4 FPS at 1080p, is unnecessary for this game given the high performance of the other presets, but it demonstrates the combo's raw capability. Ultimately, the data indicates that the Ultra preset is the best default, as it delivers a flawless experience at all but the most extreme 4K high-refresh scenarios.

Measured FPS Breakdown

The measured frame rates show a clear pattern of the GPU handling the workload efficiently at all settings. At 1920x1080, the average FPS ranges from 162.4 on Ultra to 344.4 on Low. The Medium preset lands at 276.3 FPS, while High sits at 173.9 FPS. This spread shows that the game's settings have a significant impact on the frame rate, but the lowest result is still exceptionally high.

Moving to 2560x1440, the performance scales down predictably. The Low preset achieves 249.4 FPS, Medium reaches 197.4 FPS, High drops to 124.8 FPS, and Ultra bottoms out at 116.8 FPS. The consistent drop from 1080p to 1440p is around 28-30% for the lower presets, but for High and Ultra, the drop is more pronounced, suggesting a greater reliance on pixel throughput.

At 3840x2160, the performance is still strong. The Low preset yields 157 FPS, which is a remarkable result for 4K. Medium follows at 123.4 FPS, High at 78.3 FPS, and Ultra at 74.5 FPS. The gap between High and Ultra at 4K is only 3.8 FPS, indicating that the Ultra preset is not significantly more demanding at this resolution. The data shows that the GPU is capable of delivering playable frame rates at 4K with all settings, which reflects the efficiency of the RDNA 4.0 architecture for this title.

How This Combo Ranks

The combination of the Intel Core i5-12600KF and AMD Radeon RX 9060 XT 8 GB ranks at 780 out of 1671 tested combos in Inside. This places it in the upper half of all tested systems, which is a solid result given the GPU's mid-range percentile of 50. The CPU, however, is a stronger component, with a percentile of 84 against all CPUs, indicating that the processor is a higher-performing part than the graphics card relative to their respective markets.

The rank of 780 suggests that while this combo is capable of high frame rates, there are many other combinations that perform even better, likely with more powerful GPUs. The data shows that the CPU is not the limiting factor, as its benchmark scores are competitive with the Intel Core i9-10900K and Intel Core i5-12600K, both of which are high-end parts. The GPU's performance is the more likely constraint on the combo's overall rank, as the 8 GB memory and 128-bit bus are modest by modern standards. However, for this specific game, the rank is more than sufficient, as the measured frame rates are far above what is needed for a smooth experience.

CPU Role

The Intel Core i5-12600KF plays a supporting role in this game, as Inside is not a CPU-intensive title. The processor features 10 cores and 16 threads, with a base clock of 3.70 GHz and a boost clock of 4.90 GHz. Its Alder Lake architecture, built on a 10 nm process, provides strong single-thread performance, which is evident in its benchmark scores. The Cinebench R23 single-core score is 3309, and the 3DMark single-thread score is 1016, both of which are high numbers that indicate excellent per-core performance.

The CPU's multi-threaded capabilities are also robust, with a Cinebench R23 multi-core score of 23444 and a Geekbench multi-core score of 12373. However, these scores are largely irrelevant for Inside, which is a puzzle platformer that likely uses only a few threads. The CPU's 20 MB of shared L3 cache and support for DDR4 and DDR5 memory ensure that it can feed the GPU with data quickly, but the frame rates are primarily determined by the GPU's rendering speed. The CPU's benchmark scores show a near-identical performance to the Intel Core i9-10900K, with a 0% delta, and it is only 0.1% slower than the Intel Core i5-12600K. This suggests that the CPU is a high-end part that will not bottleneck the GPU in this or most other games.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals that the GPU is the primary bottleneck at higher resolutions, but the CPU's strong performance keeps the lower resolutions exceptionally fast. At High settings, the average FPS drops from 173.9 at 1080p to 124.8 at 1440p, a 28.2% decrease, and then to 78.3 at 4K, a further 37.2% decrease from 1440p. This scaling is typical for a GPU-bound scenario, where the number of pixels is the main factor.

For the Low preset, the scaling is even more dramatic. The frame rate drops from 344.4 at 1080p to 249.4 at 1440p, a 27.6% decrease, and then to 157 at 4K, a 37.1% decrease from 1440p. The fact that the 1440p Low preset still achieves 249.4 FPS suggests that the CPU is able to feed the GPU fast enough at that resolution, but the 4K result of 157 FPS indicates that the GPU's pixel fill rate is becoming a limiting factor. The Ultra preset shows a similar pattern, dropping from 162.4 at 1080p to 116.8 at 1440p and then to 74.5 at 4K.

The data implies that at 1080p, the CPU is the more significant contributor to the high frame rates, as the GPU has ample headroom. As the resolution increases, the GPU's workload grows, and the frame rate scales down accordingly. The 4K results, while lower, are still high enough to indicate that this combo is well-balanced for this game, with the CPU providing a strong foundation and the GPU handling the rendering demands effectively.

Hardware Specifications

Intel Core i5-12600KF

Cores / Threads 10 / 16
Base Clock 3700 MHz
Boost Clock 4900 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

AMD Radeon RX 9060 XT 8 GB

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 3130 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-12600KF + AMD Radeon RX 9060 XT 8 GB in Inside

Resolution Settings Avg FPS
3840x2160 Low 157.0
3840x2160 Medium 123.4
3840x2160 High 78.3
3840x2160 Ultra 74.5
2560x1440 Low 249.4
2560x1440 Medium 197.4
2560x1440 High 124.8
2560x1440 Ultra 116.8
1920x1080 Low 344.4
1920x1080 Medium 276.3
1920x1080 High 173.9
1920x1080 Ultra 162.4

Inside with ii5-12600KF + Other GPUs

See how Inside performs with the same CPU but different graphics cards.

Inside with RX 9060 XT 8 GB + Other CPUs

See how Inside performs with the same GPU but different processors.

Other Games with ii5-12600KF + RX 9060 XT 8 GB

Explore FPS benchmarks for other games using this same hardware combination.