Inside

Inside

AVERAGE FPS
193
excellent

This combination delivers exceptional performance with an average of 193 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 83 87 140 174
1440p QHD 132 139 222 278
1080p Full HD 184 193 309 371

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 174
3840x2160 Medium 140
3840x2160 High 87
3840x2160 Ultra 83
2560x1440 Low 278
2560x1440 Medium 222
2560x1440 High 139
2560x1440 Ultra 132
1920x1080 Low 371
1920x1080 Medium 309
1920x1080 High 193
1920x1080 Ultra 184

Inside with AMD Ryzen 7 7700 + NVIDIA GeForce RTX 4060 Ti 8 GB, In-Depth Analysis

Inside is a puzzle platformer that places almost no sustained stress on the AMD Ryzen 7 7700 + NVIDIA GeForce RTX 4060 Ti 8 GB combination, with the measured frame rates indicating that the GPU becomes the primary scaling factor only at 4K, while the CPU’s 8-core/16-thread configuration provides ample headroom at lower resolutions. The data shows a system that delivers exceptionally high average FPS across all tested presets, making the limiting component a matter of resolution rather than hardware capability.

Resolution Scaling

The frame rate behavior across the three tested resolutions reveals a classic GPU-bound scaling curve that only begins to bite at 4K. From 1920x1080 to 2560x1440, the average FPS drop is consistent but moderate; for example, at High settings the average falls from 193 to 139 FPS, a reduction of approximately 28%. The same settings step from 2560x1440 to 3840x2160 shows a sharper decline, with High settings dropping from 139 to 87 FPS, a 37% reduction. This steepening curve at 4K indicates that the RTX 4060 Ti’s 8 GB VRAM and 128-bit memory interface are beginning to limit throughput, though the absolute numbers remain far above playable thresholds.

The Low preset tells a more extreme story. At 1080p Low, the system produces 371 FPS average, which drops to 278 at 1440p, a 25% decrease, and then to 174 at 4K, a further 37% drop. The fact that 4K Low still averages 174 FPS demonstrates that even the most demanding resolution in this test leaves the GPU with significant spare capacity. The Medium preset shows the most complete data with min/max values, and here the scaling pattern is identical: 309 FPS at 1080p, 222 at 1440p (a 28% drop), and 140 at 4K (a 37% drop from 1440p).

Ultra settings produce the lowest average FPS at each resolution, but the relative scaling remains similar: 184 at 1080p, 132 at 1440p (a 28% drop), and 83 at 4K (a 37% drop). The consistent ~28%/37% scaling pattern across all four presets strongly suggests that the limiting factor is the GPU’s pixel throughput and memory bandwidth rather than any CPU bottleneck. If the CPU were the constraint, the scaling from 1080p to 4K would show a much flatter curve, as lower resolutions would be CPU-limited. The data shows no such plateau, indicating that the Ryzen 7 7700 is never the primary limiter in this game.

GPU Role

The GeForce RTX 4060 Ti 8 GB plays the decisive role in determining the performance envelope for Inside. Its 8 GB of GDDR6 memory on a 128-bit bus provides 288.0 GB/s of bandwidth, which is sufficient for this game’s modest texture and geometry demands, but the 4K Ultra result of 83 FPS average suggests that the card is approaching its fill-rate limits rather than capacity limits. The base clock of 2310 MHz and boost clock of 2535 MHz, combined with 4352 shading units and 48 ROPs, generate a pixel rate of 121.7 GPixel/s, which explains why 4K (approximately 8.3 million pixels) produces such a large frame-time cost.

The GPU’s benchmark data places it in the 19th percentile among all GPUs, with an average benchmark score of 2913 in 3DMark Steel Nomad DX12. Its nearest rival, the NVIDIA RTX PRO 4000 Blackwell SFF, scores 2910, a delta of 0.1%, meaning the two cards are effectively identical in this synthetic test. The 4060 Ti 16 GB version scores 2907, which is 0.2% lower, confirming that the extra VRAM does not materially change raw compute performance. The fact that the RTX 4060 Ti 8 GB sits near the 19th percentile suggests it is a mid-range part, yet Inside’s results show it delivering 4K Ultra at 83 FPS average — proof of the game’s light rendering load rather than the GPU’s absolute power.

The VRAM capacity of 8 GB does not appear to be a limiting factor in any measured configuration, as even 4K Ultra does not show the frame-time spikes or stutters that would indicate memory swapping. The Medium preset at 4K shows a min FPS of 119 and max of 161, a range that indicates consistent frame pacing rather than memory pressure-induced hitches. However, the 288.0 GB/s bandwidth is likely the reason 4K scaling is steeper than at lower resolutions, as the pixel fill rate and texture fetch demands double from 1080p to 4K, outpacing the memory subsystem’s ability to keep up.

FAQ

Q: What is the highest average FPS recorded for this combo?

A: The highest average FPS is 371, recorded at 1920x1080 with Low settings.

Q: How does the RTX 4060 Ti 8 GB compare to its nearest rival in synthetic benchmarks?

A: The RTX 4060 Ti 8 GB scores 2913 in 3DMark Steel Nomad DX12, while the NVIDIA RTX PRO 4000 Blackwell SFF scores 2910, a delta of 0.1% in favor of the 4060 Ti.

Q: What is the minimum FPS recorded at 4K Medium settings?

A: The minimum FPS at 3840x2160 Medium is 119, with an average of 140 and maximum of 161.

Q: Does the CPU or GPU limit performance more in this game?

A: The GPU is the primary limiter, as evidenced by the consistent ~28% frame rate drop from 1080p to 1440p and ~37% drop from 1440p to 4K across all settings, which indicates scaling typical of GPU-bound workloads.

Q: What is the combo’s rank among all tested CPU/GPU combinations for this game?

A: The combo ranks 1247 out of 3716 total combinations, placing it in the upper third of all tested systems.

Q: What is the average FPS difference between High and Ultra at 1440p?

A: At 2560x1440, High averages 139 FPS and Ultra averages 132 FPS, a difference of 7 FPS or approximately 5%.

Measured FPS Breakdown

At 1920x1080, the full preset range delivers high frame rates across the board. Low settings produce an average of 371 FPS, which is the single highest average in the entire dataset. Medium settings average 309 FPS, with a minimum of 263 and maximum of 355, showing a tight frame-time distribution. High settings average 193 FPS, while Ultra settings average 184 FPS. The gap between Low and Ultra at 1080p is 187 FPS, indicating that the visual quality presets have a substantial impact on performance even at this resolution.

At 2560x1440, the averages scale down proportionally. Low settings deliver 278 FPS, Medium averages 222 FPS (min 189, max 255), High averages 139 FPS, and Ultra averages 132 FPS. The difference between High and Ultra narrows to just 7 FPS at this resolution, suggesting that the Ultra preset’s additional effects are minimal in cost. The Medium preset’s min FPS of 189 at 1440p is higher than the 4K High average of 87 FPS, demonstrating that resolution is the dominant factor in determining frame rates.

At 3840x2160, the performance profile changes character. Low settings still manage 174 FPS average, which is remarkable for 4K, but Medium drops to 140 FPS (min 119, max 161). High settings fall to 87 FPS, and Ultra bottoms out at 83 FPS. The spread between Low and Ultra at 4K is 91 FPS, which is proportionally similar to the 1080p spread. The Medium preset at 4K remains the only one with min/max data, showing a 42 FPS range between its 119 minimum and 161 maximum, which indicates that frame pacing is stable but not perfectly uniform under load.

The data shows a consistent pattern: each preset tier reduces performance by roughly 25-30% compared to the tier below it, regardless of resolution. For example, at 1080p, the step from Low (371) to Medium (309) is a 17% drop, from Medium to High (193) is a 38% drop, and from High to Ultra (184) is a 5% drop. This non-linear relationship between presets suggests that the High and Ultra settings share most of their rendering features, while Medium and Low represent more distinct quality cuts.

Settings Recommendations

The data indicates that the High preset offers the best balance of visual fidelity and performance for most use cases, though the optimal choice depends on the target display resolution. At 1080p, High settings deliver 193 FPS average, which is more than sufficient for any display refresh rate, while Ultra only adds a marginal 9 FPS cost (dropping to 184). The 5% difference between High and Ultra at 1080p means that users with high-refresh-rate monitors can safely enable Ultra without sacrificing smoothness.

At 1440p, the High preset’s 139 FPS average is still well above the 120 Hz threshold, and Ultra’s 132 FPS remains playable. However, the Medium preset at 1440p delivers 222 FPS, which would be the better choice for competitive play on a 240 Hz display, as the frame rate headroom is substantial. The measured min FPS of 189 at Medium 1440p ensures that even the heaviest scenes stay above 180 FPS, making this the most consistent option for high-refresh gaming.

At 4K, the recommendation flips to favor Low or Medium settings. Low averages 174 FPS, which is excellent for 4K, while Medium averages 140 FPS with a 119 FPS minimum. High and Ultra at 4K produce 87 and 83 FPS respectively, which are still playable but leave little headroom for frame-time spikes. The 4K Medium preset’s min FPS of 119 is the safest choice for maintaining a locked 60 FPS or better, as it provides a 59 FPS buffer over the minimum required for smooth gameplay.

Given the game’s puzzle platformer nature, where reaction time is rarely critical, the High preset at 1080p or 1440p is the recommended default. It provides a 193 FPS average at 1080p and 139 FPS at 1440p, which exceeds the refresh rate of most monitors while maintaining visual quality. For 4K displays, Medium settings offer the best combination of average FPS (140) and minimum FPS (119) without the visual degradation of Low settings.

CPU Role

The AMD Ryzen 7 7700’s contribution to Inside’s performance is best described as providing a massive safety margin rather than being an active participant in frame generation. Its 8 cores and 16 threads, running at a base clock of 3.80 GHz and boost clock of 5.30 GHz, are far more than this game requires. The CPU’s single-thread performance is evidenced by a Cinebench R23 single-core score of 1930, while its multi-core score of 18760 in the same test shows strong scaling across its 16 threads. For a puzzle platformer that primarily relies on a few threads for game logic and physics, the 7700’s single-thread capability is the relevant metric, and it is clearly not a bottleneck.

The benchmark data places the 7700 in the 87th percentile among all CPUs, with an average benchmark score of 40081. Its nearest rival, the AMD Ryzen AI 9 365, scores 40048, a delta of 0.1% in favor of the 7700, meaning the two are statistically tied. The Intel Core 5 221E scores 40144, which is 0.2% higher, and the AMD Ryzen 9 270 scores 40246, 0.4% higher. This tight clustering around the 40000 mark shows that the 7700 is positioned in the upper mid-range of CPU performance, but Inside’s measured frame rates do not exercise this headroom.

The CPU’s memory support for DDR5 with dual-channel configuration provides 83.2 GB/s of bandwidth, which is more than sufficient for the game’s data streaming needs. The 32 MB of shared L3 cache further reduces memory latency, though the game’s low system requirements mean that even a much weaker CPU would likely deliver similar frame rates. The data shows that at 1080p Low, the system achieves 371 FPS, which would require the CPU to process a frame every 2.7 milliseconds — a task the 7700 handles with ease given its 5.30 GHz boost clock.

The combo’s rank of 1247 out of 3716 combinations, combined with the CPU’s 87th percentile ranking, suggests that the CPU is not the differentiator in Inside’s performance. Instead, the GPU’s 19th percentile ranking is the more limiting factor, and the measured frame rates reflect this hierarchy. Users upgrading from a weaker CPU would see no benefit in Inside, as the 7700 already provides far more processing headroom than the game can utilize.

Hardware Specifications

AMD Ryzen 7 7700

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 5300 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 4060 Ti 8 GB

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2535 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 7700 + NVIDIA GeForce RTX 4060 Ti 8 GB in Inside

Resolution Settings Avg FPS
3840x2160 Low 174.0
3840x2160 Medium 140.0
3840x2160 High 87.0
3840x2160 Ultra 83.0
2560x1440 Low 278.0
2560x1440 Medium 222.0
2560x1440 High 139.0
2560x1440 Ultra 132.0
1920x1080 Low 371.0
1920x1080 Medium 309.0
1920x1080 High 193.0
1920x1080 Ultra 184.0

Inside with RTX 4060 Ti 8 GB + Other CPUs

See how Inside performs with the same GPU but different processors.

Other Games with Ryzen 7 7700 + RTX 4060 Ti 8 GB

Explore FPS benchmarks for other games using this same hardware combination.