Inside

Inside

AVERAGE FPS
188
excellent

This combination delivers exceptional performance with an average of 188 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 83 87 140 174
1440p QHD 132 139 222 278
1080p Full HD 184 193 299 323

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 174
3840x2160 Medium 140
3840x2160 High 87
3840x2160 Ultra 83
2560x1440 Low 278
2560x1440 Medium 222
2560x1440 High 139
2560x1440 Ultra 132
1920x1080 Low 323
1920x1080 Medium 299
1920x1080 High 193
1920x1080 Ultra 184

Inside with AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 4060 Ti 8 GB, In-Depth Analysis

The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 4060 Ti 8 GB delivers a remarkably smooth experience in Inside, a game that is far more demanding than its minimalist presentation suggests. The benchmark data reveals a combo that never drops below 83 FPS at 4K Ultra, indicating substantial headroom for this puzzle platformer. This analysis breaks down the measured performance across resolutions and settings, contextualizes the results against the combo’s ranking, and examines the specific roles of the CPU and GPU in achieving these frame rates.

Resolution Scaling

The performance scaling from 1080p to 4K clearly demonstrates where the bottleneck lies in this system for Inside. At 1080p with Low settings, the combo achieves an average of 323 FPS. Moving to 1440p Low, the average drops to 278 FPS, a decline of 45 FPS (approximately 14%). Pushing further to 4K Low yields 174 FPS, a substantial 149 FPS drop from the 1080p baseline. This scaling pattern indicates that at lower resolutions and settings, the CPU is a limiting factor, as the frame rate does not double when rendering resolution is quartered.

However, the picture changes when examining the High and Ultra presets. At 1080p High, the average is 193 FPS, which falls to 139 FPS at 1440p High and then to 87 FPS at 4K High. Similarly, at Ultra settings, the progression is 184 FPS at 1080p, 132 FPS at 1440p, and 83 FPS at 4K. The relative drop from 1080p to 4K is less severe at these higher settings (from 193 to 87 FPS, a 55% reduction) compared to the Low preset (from 323 to 174 FPS, a 46% reduction). This suggests that as the graphics load increases, the GPU begins to take on a more significant role, though the CPU remains capable of feeding it sufficient data.

The data indicates a system that is well-balanced for this title. At 1080p, the frame rates are high enough that the CPU’s single-thread performance becomes the primary constraint, preventing the GPU from reaching its full potential. At 4K, the GPU’s rendering load becomes more dominant, but the RTX 4060 Ti still manages to keep frame rates well above 60 FPS even on the Ultra preset. The 4K Ultra result of 83 FPS is particularly telling, as it shows the GPU is not overwhelmed by the game’s visual effects at the highest quality setting.

FAQ

Q: What is the average frame rate at 1440p with Ultra settings?

A: The average frame rate at 2560x1440 with the Ultra preset is 132 FPS. This is a strong result, indicating that the combo can handle high refresh rate 1440p monitors without any issues in Inside.

Q: How does the 4K Low preset compare to the 4K Ultra preset?

A: The 4K Low preset delivers an average of 174 FPS, while the 4K Ultra preset delivers 83 FPS. This represents a performance difference of 91 FPS, showing that the Ultra preset nearly halves the frame rate compared to Low, but still remains comfortably playable.

Q: Is there any measurable frame time variance at 1080p Medium?

A: Yes, the data provides minimum and maximum frame rates for the 1080p Medium preset. The average is 299 FPS, with a minimum of 254 FPS and a maximum of 343 FPS. This 89 FPS spread between the minimum and maximum indicates some variance, but the minimum is still exceptionally high.

Q: What is the difference in average FPS between 1080p and 4K at High settings?

A: At 1080p High, the average frame rate is 193 FPS. When the resolution is increased to 4K High, the average frame rate drops to 87 FPS. The difference is 106 FPS, a significant reduction that highlights the rendering cost of 4K resolution.

Q: Does the combo maintain a 60 FPS minimum at 4K Medium?

A: Yes, the 4K Medium preset has a measured minimum frame rate of 119 FPS and an average of 140 FPS. The minimum is well above 60 FPS, indicating that there are no significant stutters or drops that would compromise the experience.

Q: How does the combo’s performance at 1440p Low compare to its 1080p Low result?

A: At 1440p Low, the average frame rate is 278 FPS, while at 1080p Low it is 323 FPS. The 1440p result is 45 FPS lower, showing that the game is still CPU-bound at this resolution with Low settings, as the frame rate remains very high.

How This Combo Ranks

The benchmark data places this specific configuration at rank 1366 out of 3716 tested combos for Inside. This ranking puts it in the 63rd percentile of all tested systems, indicating that it outperforms the majority of combos in the database for this particular game. The percentileVsAllCpus for the CPU is 81, and for the GPU it is 19, which suggests that while the CPU is a high-performing part relative to all CPUs, the GPU is not as highly ranked relative to all GPUs. The combination of a top-tier CPU with a mid-range GPU results in a system that is well-suited for this game, which appears to favor CPU performance.

The combo’s rank is a reflection of the balanced nature of the hardware. The Ryzen 7 5800XT’s strong multi-threaded and single-threaded performance, as seen in its benchmark scores, ensures that the system is never held back by the processor. Meanwhile, the RTX 4060 Ti, while not a top-tier GPU, is more than sufficient for the demands of Inside. The rank of 1366 out of 3716 suggests that many other combos with more powerful GPUs might achieve higher frame rates, but this pairing offers a solid level of performance that is consistent with its component class.

Measured FPS Breakdown

At 1920x1080, the lowest resolution tested, the combo demonstrates its peak performance. The Low preset achieves an average of 323 FPS, which is the highest average recorded in the entire dataset. The Medium preset is close behind with 299 FPS, and the High preset delivers 193 FPS. The Ultra preset is the most demanding at this resolution, producing an average of 184 FPS. The data for the Medium preset shows a minimum of 254 FPS and a maximum of 343 FPS, indicating a wide range of frame times but with a very high floor.

Moving to 2560x1440, the frame rates remain exceptionally high. The Low preset yields an average of 278 FPS, while the Medium preset averages 222 FPS with a minimum of 189 FPS and a maximum of 255 FPS. The High preset delivers 139 FPS, and the Ultra preset produces 132 FPS. The scaling from 1080p to 1440p is consistent, with each preset showing a noticeable but not drastic decrease in average FPS.

At 3840x2160, the GPU is pushed harder, but the results are still impressive. The Low preset averages 174 FPS, and the Medium preset averages 140 FPS with a minimum of 119 FPS and a maximum of 161 FPS. The High preset brings the average down to 87 FPS, and the Ultra preset is the most demanding, with an average of 83 FPS. Even at the highest resolution and quality settings, the combo maintains an average above 60 FPS, ensuring a smooth gaming experience.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user’s display and refresh rate. For a 60 Hz display, the 4K Ultra preset is perfectly viable, as the average of 83 FPS exceeds the 60 FPS threshold. For users with 1440p displays capable of 144 Hz or higher, the High or Ultra presets are recommended, as both deliver averages above 130 FPS. The 1440p Medium preset is also an option, with an average of 222 FPS, but the visual quality difference between Medium and High is likely noticeable.

For 1080p displays with high refresh rates (240 Hz or more), the Low or Medium presets are the best choices to maximize frame rates, with averages of 323 FPS and 299 FPS respectively. However, given the high frame rates at all settings, users can prioritize visual fidelity. The High preset at 1080p, with an average of 193 FPS, is an excellent balance between image quality and performance. The Ultra preset at 1080p offers a marginal visual upgrade over High but yields a lower average of 184 FPS, making High the more balanced recommendation for most users. The data suggests that the Medium preset provides a significant performance boost over High across all resolutions, while the jump from High to Ultra is comparatively small in frame rate cost.

CPU Role

The AMD Ryzen 7 5800XT is a central component in this combo’s performance. With 8 cores and 16 threads, it is a highly capable processor. Its base clock of 3.80 GHz and boost clock of 4.80 GHz provide strong single-thread performance, which is crucial for games like Inside that may not utilize all cores effectively. The CPU’s benchmark scores support this, with a single-thread score of 959 in 3dmark and 3359 in Cinebench R23. These figures place it in the 81st percentile of all CPUs, indicating strong performance.

The CPU’s role is evident in the resolution scaling data. At 1080p Low, the frame rate of 323 FPS is likely limited by the CPU’s ability to process game logic and draw calls, rather than the GPU’s rendering capability. The fact that the frame rate does not scale linearly with resolution at Low settings reinforces this, as the CPU becomes the limiting factor. The processor’s 32 MB of shared L3 cache and dual-channel DDR4 memory support contribute to its ability to feed the GPU efficiently. The data shows that this CPU is more than sufficient to avoid becoming a bottleneck for the RTX 4060 Ti in Inside, even at the highest frame rates.

GPU Role

The NVIDIA GeForce RTX 4060 Ti 8 GB is responsible for the rendering output. Its performance in Inside is characterized by its ability to handle the game’s graphical demands at high resolutions. With a base clock of 2310 MHz and a boost clock of 2535 MHz, the GPU is well-equipped for this task. Its 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 288.0 GB/s, which is sufficient for the game’s texture data at 4K resolution.

The GPU’s role becomes more prominent as resolution increases. At 4K Ultra, the average of 83 FPS demonstrates that the GPU is being significantly challenged, but it still manages to maintain a playable frame rate. The GPU’s benchmark score in 3dmark Steel Nomad DX12 is 2913, placing it in the 19th percentile of all GPUs. This relatively low percentile is reflected in the fact that the GPU is not the primary strength of this combo. However, for Inside, the GPU is more than adequate, as the game’s engine is not overly demanding on graphics hardware. The data indicates that the GPU’s 8 GB VRAM is not a limiting factor at the tested settings, as frame rates remain high even at 4K Ultra. The GPU’s performance is consistent with its position as a mid-range card, and it pairs well with the high-end CPU to deliver a smooth experience in this title.

Hardware Specifications

AMD Ryzen 7 5800XT

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4800 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4060 Ti 8 GB

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2535 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 4060 Ti 8 GB in Inside

Resolution Settings Avg FPS
3840x2160 Low 174.0
3840x2160 Medium 140.0
3840x2160 High 87.0
3840x2160 Ultra 83.0
2560x1440 Low 278.0
2560x1440 Medium 222.0
2560x1440 High 139.0
2560x1440 Ultra 132.0
1920x1080 Low 323.0
1920x1080 Medium 299.0
1920x1080 High 193.0
1920x1080 Ultra 184.0

Inside with RTX 4060 Ti 8 GB + Other CPUs

See how Inside performs with the same GPU but different processors.

Other Games with Ryzen 7 5800XT + RTX 4060 Ti 8 GB

Explore FPS benchmarks for other games using this same hardware combination.