Hitman 2

Hitman 2

AVERAGE FPS
66
good

This combination provides smooth gameplay with an average of 66 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 30 36 50
1440p QHD 40 52 69 96
1080p Full HD 61 81 112 148

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 50
3840x2160 Medium 36
3840x2160 High 30
3840x2160 Ultra 24
2560x1440 Low 96
2560x1440 Medium 69
2560x1440 High 52
2560x1440 Ultra 40
1920x1080 Low 148
1920x1080 Medium 112
1920x1080 High 81
1920x1080 Ultra 61

Hitman 2 with Intel Core i9-14900K + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

Intel Core i9-14900K paired with NVIDIA GeForce RTX 3060 Ti delivers a distinctly CPU-favored balance in Hitman 2, where the processor's substantial 24 cores and 32 threads provide headroom that the GPU cannot always exploit at higher settings. The Core i9-14900K operates with a base clock of 3.20 GHz and a boost clock of 6.00 GHz, built on the Raptor Lake-R architecture with a 36 MB shared L3 cache. In this stealth title, the CPU's single-thread performance is the primary driver for game logic and AI pathing, while the multi-threaded capacity ensures that background simulation never becomes a bottleneck. The benchmark data shows that at 1080p Low settings, the system reaches 148.2 FPS, which is more than double the 4K Ultra result of 24.1 FPS, indicating that the CPU can feed frames rapidly when the GPU load is light, but the GPU becomes the limiting factor as resolution and detail increase.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i9-14900K is a 24-core, 32-thread processor with a 125 W TDP and a 6.00 GHz boost clock, placing it in the 97th percentile against all CPUs. Its multi-threaded benchmark scores are formidable: 49,872 in Cinebench R23 multi-core and 20,946 in Cinebench R20 multi-core, with a single-core score of 7,040 in Cinebench R23. For Hitman 2, which is not heavily threaded across all 32 threads, the processor's single-core efficiency at 3.20 GHz base and 6.00 GHz boost is what allows the game to maintain high frame rates when the GPU is not saturated. The data shows that at 1080p Low, the system produces 148.2 FPS, a figure that relies on the CPU's ability to process game state changes and issue draw calls quickly. The processor's 36 MB shared L3 cache helps reduce memory latency for frequently accessed game data, while its 2 MB per-core L2 cache supports the rapid context switching common in stealth AI routines.

When compared to its nearest rivals, the Core i9-14900K's average benchmark score of 79,824 sits just 0.3% below the AMD EPYC 7413 (80,041) and 0.7% above the Intel Core i9-14900KF (79,245). This marginal delta underscores that the 14900K is effectively tied with its closest competitors in raw compute, meaning that any FPS differences in Hitman 2 can be attributed more to the GPU and resolution settings than to CPU headroom. The processor's 24 cores and 32 threads are overkill for a title like Hitman 2, which rarely scales beyond a handful of threads, but the high boost clock of 6.00 GHz ensures that the single-thread performance remains exceptional. In practice, the CPU role in this combo is to never be the bottleneck at lower resolutions, allowing the RTX 3060 Ti to operate at its full potential, which is evident in the 148.2 FPS at 1080p Low versus the 49.6 FPS at 4K Low.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with a GA104 chip, featuring 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. Its base clock is 1410 MHz with a boost clock of 1665 MHz, and the memory runs at 1750 MHz (14 Gbps effective), delivering 16.20 TFLOPS of FP32 performance. The GPU has 4,864 shading units, 152 TMUs, and 80 ROPs, with 38 RT cores and 152 tensor cores. In Hitman 2, the GPU's role becomes dominant at higher resolutions and settings, as the 8 GB VRAM capacity is tested by the game's detailed environments and crowd simulations. The benchmark results show a clear scaling pattern: at 1080p Ultra, the system achieves 61.2 FPS, while at 1440p Ultra it drops to 39.5 FPS, and at 4K Ultra it falls to 24.1 FPS. This drop indicates that the RTX 3060 Ti's 8 GB frame buffer and 448.0 GB/s bandwidth are sufficient for 1080p and 1440p, but at 4K, the memory bandwidth becomes a limiting factor, especially with High and Ultra settings that increase texture detail and shadow quality.

The GPU's percentile ranking is 69th among all GPUs, with an average benchmark score of 25,120. Its nearest rivals include the AMD Radeon RX 6700M (25,180, -0.2% delta), AMD Radeon RX 6600 (25,235, -0.5%), and AMD Radeon 890M (25,246, -0.5%), showing that the RTX 3060 Ti is tightly clustered with these competitors in synthetic tests. However, in Hitman 2, the measured FPS reveals that the GPU is the primary constraint at 4K, where even Low settings yield only 49.6 FPS compared to 148.2 FPS at 1080p Low. This 3x FPS reduction from 1080p to 4K at Low settings highlights that the GPU's pixel throughput and memory bandwidth are the bottlenecks, not the CPU. The RTX 3060 Ti's 80 ROPs and 253.1 GTexel/s texture rate are adequate for 1080p, but the 133.2 GPixel/s pixel rate struggles to fill 4K frames efficiently, particularly when Ultra settings increase the geometric complexity and draw distance.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The FPS scaling across resolutions reveals a classic GPU-bound pattern, with the CPU's influence waning as pixel count rises. At Low settings, the system delivers 148.2 FPS at 1080p, 95.7 FPS at 1440p, and 49.6 FPS at 4K. This represents a 35% drop from 1080p to 1440p and a further 48% drop from 1440p to 4K, indicating that the RTX 3060 Ti's fill rate and bandwidth are increasingly strained. The same trend appears at High settings: 81 FPS at 1080p, 52 FPS at 1440p, and 29.5 FPS at 4K, with the 4K result being less than half of the 1080p figure. At Ultra settings, the drop is even more pronounced, with 61.2 FPS at 1080p falling to 39.5 FPS at 1440p and 24.1 FPS at 4K, showing that the GPU's 8 GB VRAM is saturated by the combination of high resolution and maximum detail.

The data suggests that the CPU is not the limiting factor above 1080p, as the Core i9-14900K's single-thread performance is sufficient to drive the game engine at all tested resolutions. If the CPU were the bottleneck, the FPS would remain relatively constant across resolutions, but the measured drops from 1080p to 4K (e.g., 148.2 to 49.6 FPS at Low) are far too large to be attributed to CPU limitations. Instead, the RTX 3060 Ti's 448.0 GB/s bandwidth and 8 GB VRAM are the constraints, particularly at 4K where the memory bus width of 256 bits is insufficient to maintain high frame rates with detailed textures. The scaling from Medium to High to Ultra at any given resolution also shows a consistent FPS penalty, with Ultra settings typically costing around 50-60% of the FPS compared to Low, which is expected for a GPU in the 69th percentile.

How This Combo Ranks — use comboRankInGame vs other tested combos

This specific combination of Intel Core i9-14900K and NVIDIA GeForce RTX 3060 Ti ranks 1,217th out of 1,795 tested combos in Hitman 2, placing it in the lower third of the database. This ranking is surprising given the strength of the CPU, but it accurately reflects the GPU's limitations in this title. The comboRankInGame of 1217 out of 1795 indicates that most other tested configurations, likely with higher-tier GPUs, outperform this pairing in Hitman 2, especially at higher resolutions. The rank is not a measure of absolute performance but rather a relative position among all possible CPU-GPU combinations, and the data shows that the RTX 3060 Ti holds back the Core i9-14900K's potential.

Given that the CPU is in the 97th percentile and the GPU is in the 69th percentile, the combo rank of 1217 suggests that the system is balanced around the GPU's mid-range capability. In Hitman 2, which is not as CPU-intensive as some other titles, the GPU's role is amplified, and the 8 GB VRAM and 448.0 GB/s bandwidth are simply not enough to push the combo into the upper echelons of the rankings. The measured FPS data supports this, as the system fails to reach 60 FPS at 4K on any setting, and even at 1440p Ultra, it only achieves 39.5 FPS, which is below the smoothness threshold for most players. This ranking also reflects the fact that many combos in the database likely use GPUs with more VRAM or higher memory bandwidth, which are better suited to Hitman 2's demanding environments.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the system delivers playable frame rates across all settings, with the lowest being 61.2 FPS at Ultra and the highest being 148.2 FPS at Low. The Medium setting produces 111.8 FPS, while High yields 81 FPS. These numbers indicate that at 1080p, the combo is capable of smooth gameplay even at maximum detail, with the CPU's high boost clock ensuring that frame times remain consistent. The drop from Low to Ultra is 87 FPS, which is a 59% reduction, highlighting the GPU's sensitivity to graphical detail at this resolution.

Moving to 2560x1440, the frame rates decline noticeably, with Low settings achieving 95.7 FPS, Medium at 69 FPS, High at 52 FPS, and Ultra at 39.5 FPS. The transition from 1080p to 1440p results in a 35% FPS loss at Low settings and a 35% loss at Ultra, showing that the GPU's pixel processing capabilities are stretched. At 1440p, the system remains playable at Low and Medium, but High and Ultra fall below the 60 FPS threshold, making the experience less fluid.

At 3840x2160, the performance drops significantly, with Low settings producing 49.6 FPS, Medium at 35.8 FPS, High at 29.5 FPS, and Ultra at 24.1 FPS. None of these settings achieve 60 FPS, and even Low settings are below the playable threshold for most users. The gap between Low and Ultra at 4K is 25.5 FPS, representing a 51% reduction, which is consistent with the GPU's memory bandwidth limitations. The data shows that this combo is best suited for 1080p gaming, with 1440p being marginal at lower settings, and 4K being only viable for very low detail levels.

Hardware Specifications

Intel Core i9-14900K

Cores / Threads 24 / 32
Base Clock 3200 MHz
Boost Clock 6000 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i9-14900K + NVIDIA GeForce RTX 3060 Ti in Hitman 2

Resolution Settings Avg FPS
3840x2160 Low 49.6
3840x2160 Medium 35.8
3840x2160 High 29.5
3840x2160 Ultra 24.1
2560x1440 Low 95.7
2560x1440 Medium 69.0
2560x1440 High 52.0
2560x1440 Ultra 39.5
1920x1080 Low 148.2
1920x1080 Medium 111.8
1920x1080 High 81.0
1920x1080 Ultra 61.2

Hitman 2 with ii9-14900K + Other GPUs

See how Hitman 2 performs with the same CPU but different graphics cards.

Hitman 2 with RTX 3060 Ti + Other CPUs

See how Hitman 2 performs with the same GPU but different processors.

Other Games with ii9-14900K + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.