Hard West

Hard West

AVERAGE FPS
75
good

This combination provides smooth gameplay with an average of 75 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 32 41 51
1440p QHD 45 63 82 100
1080p Full HD 72 101 130 159

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 51
3840x2160 Medium 41
3840x2160 High 32
3840x2160 Ultra 24
2560x1440 Low 100
2560x1440 Medium 82
2560x1440 High 63
2560x1440 Ultra 45
1920x1080 Low 159
1920x1080 Medium 130
1920x1080 High 101
1920x1080 Ultra 72

Hard West with Intel Core i5-12400 + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

# Hard West with Intel Core i5-12400 + NVIDIA GeForce RTX 3060 Ti

The Intel Core i5-12400 paired with the NVIDIA GeForce RTX 3060 Ti delivers a playable but demanding experience in Hard West, a 2015 turn-based tactics title. The data shows this combo ranks 1240th out of 1699 tested combinations, placing it in the lower-middle tier of tested systems. Across all measured configurations, the system averages 74.9 FPS at 1080p, 72.6 FPS at 1440p, and 36.8 FPS at 4K, indicating that resolution scaling dramatically impacts performance. The CPU, with 6 cores and 12 threads, is not the limiting factor; the GPU's 8 GB of VRAM and its position at the 69th percentile of all GPUs define the experience. This is a system that handles 1080p and 1440p well but struggles at 4K, particularly at higher settings.

Resolution Scaling

The performance drop from 1080p to 4K is steep and reveals a GPU-bound scenario. At Low settings, the system delivers 159 FPS at 1080p, 100.2 FPS at 1440p, and 50.7 FPS at 4K — a 68% reduction from 1080p to 4K. At Ultra settings, the drop is even more pronounced: from 72 FPS at 1080p to 44.8 FPS at 1440p, then collapsing to 23.9 FPS at 4K, a 67% loss from 1080p. This pattern confirms that Hard West becomes increasingly GPU-limited as resolution rises, with the RTX 3060 Ti's 448.0 GB/s memory bandwidth and 8 GB GDDR6 buffer unable to sustain high frame rates at 4K.

The scaling between 1080p and 1440p is more moderate. At High settings, 101.3 FPS at 1080p drops to 63.3 FPS at 1440p — a 37% decrease. At Medium, the drop is from 129.9 to 82.1 FPS, a 37% reduction as well. This consistent ~37% penalty across Medium and High settings suggests that the GPU's pixel throughput and texture rate (253.1 GTexel/s) are the primary constraints, not memory capacity. The 4K results, however, show a different pattern: the gap between Low (50.7 FPS) and Medium (40.7 FPS) is only 20%, but the gap from Medium to High (31.7 FPS) is 22%, and High to Ultra (23.9 FPS) is 25%. This progressive degradation at 4K indicates that shading complexity and pixel rate (133.2 GPixel/s) become the dominant bottlenecks as resolution increases.

The 1440p results are the sweet spot for this combo. At High settings, 63.3 FPS is comfortably playable, and even Ultra at 44.8 FPS remains usable for a turn-based strategy where frame timing is less critical than in action genres. The 4K results, particularly at High (31.7 FPS) and Ultra (23.9 FPS), fall below smooth-playability thresholds, suggesting that 4K users must dramatically lower settings to achieve acceptable performance.

Settings Recommendations

The measured data points to Medium settings at 1440p as the best experience-to-performance balance. At this configuration, the system produces 82.1 FPS, which is 30% higher than High settings (63.3 FPS) and only 18% lower than Low (100.2 FPS). The visual quality improvement from Low to Medium is generally substantial in this era of game, so the 18% performance cost is justified.

At 1080p, High settings at 101.3 FPS is the recommended configuration. This provides excellent frame rates while retaining most visual fidelity. Ultra at 72 FPS is also viable, but the 29% performance penalty over High (101.3 FPS) is significant for marginal visual gains. Low at 159 FPS is excessive for a turn-based tactics game; the extra headroom is unnecessary.

For 4K, the data strongly suggests Low settings (50.7 FPS) as the only playable option. Medium (40.7 FPS) dips below ideal smoothness, and High (31.7 FPS) and Ultra (23.9 FPS) are borderline unplayable. Given the genre's slower pace, 40.7 FPS at Medium might be acceptable for patient players, but the 20% improvement to Low (50.7 FPS) is more consistent with the system's capabilities.

The Ultra preset is not recommended at any resolution. Even at 1080p, it delivers 72 FPS, which is 44% lower than High (101.3 FPS) and 80% lower than Low (159 FPS). The performance cost is disproportionate to the visual gains typical of this title's Ultra settings.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is the performance anchor of this combo. Its 8 GB GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is sufficient for 1080p and 1440p but strained at 4K. The GPU's 4864 shading units and 152 TMUs handle the game's geometry and texture work efficiently, as evidenced by the 159 FPS at 1080p Low. However, the 80 ROPs and 133.2 GPixel/s pixel rate become limiting at higher resolutions, particularly at 4K where the pixel fill requirements quadruple.

The GPU's base clock of 1410 MHz and boost clock of 1665 MHz are modest by modern standards, but the measured FPS figures show they are adequate for this game. The 16.20 TFLOPS FP32 compute performance is more than enough for Hard West's turn-based rendering needs. The GPU sits at the 69th percentile of all GPUs, with an average benchmark score of 25120, placing it near the AMD Radeon RX 6700M (deltaPct -0.2%) and AMD Radeon RX 6600 (deltaPct -0.5%). This positioning explains why 4K Ultra (23.9 FPS) is challenging — the GPU is competitive with mid-range 2020-2021 parts but not with high-end cards.

The 8 GB VRAM does not appear to be a direct bottleneck in the measured results. The consistent performance scaling from Low to Ultra at 1080p (159 to 72 FPS) and 1440p (100.2 to 44.8 FPS) suggests the memory capacity is sufficient for this game's texture and geometry requirements. The bottleneck is computational: at 4K, the shader and pixel processing demands exceed the GPU's throughput, causing the steep FPS decline.

How This Combo Ranks

This combination ranks 1240th out of 1699 tested combos, placing it in the 27th percentile of tested systems. This is a surprisingly low position given the individual component scores. The CPU ranks at the 77th percentile of all CPUs, with an average benchmark score of 19850, while the GPU ranks at the 69th percentile. The combo's low ranking suggests that Hard West's performance is sensitive to specific hardware combinations that this pairing does not fully exploit.

The CPU's nearest rivals include the Intel Core i7-9700 (deltaPct 0.1%), Intel Core i7-8700 (deltaPct -0.2%), and Intel Core i5-11600K (deltaPct 0.4%). These are all previous-generation parts with similar multi-threaded performance. The GPU's nearest rivals are the AMD Radeon RX 6700M (deltaPct -0.2%), AMD Radeon RX 6600 (deltaPct -0.5%), and AMD Radeon 890M (deltaPct -0.5%). These deltas are all within 1%, indicating that the RTX 3060 Ti is well-matched against comparable mid-range GPUs. The low combo rank therefore reflects the game's specific engine characteristics rather than a weak individual component.

The measured FPS data shows this combo performs best at 1080p, where it delivers 101.3 FPS at High settings — a strong result that ranks favorably against typical systems. The 1440p results (63.3 FPS at High) are acceptable. The 4K results are the drag on the overall ranking, as the system falls below 60 FPS at all settings except Low. For a turn-based tactics game, where frame rates above 30 FPS are often adequate for smooth play, the 4K High result of 31.7 FPS remains usable. However, the ranking system clearly weights higher resolutions and settings heavily.

CPU Role

The Intel Core i5-12400 provides 6 cores and 12 threads with base and boost clocks of 2.50 GHz and 4.40 GHz respectively. This Alder Lake architecture chip with 18 MB of shared L3 cache delivers strong single-threaded performance (3dmark_single_thread score of 910, Passmark single-thread score of 3456) and capable multi-threaded performance (Cinebench R23 multicore score of 15935). The CPU's 65W TDP and 10 nm process node allow sustained boost clocks without thermal throttling in most systems.

In Hard West, a turn-based tactics title, the CPU's role is primarily in game logic, pathfinding, and AI calculations rather than rendering. The measured FPS data shows that the CPU is not the bottleneck: at 1080p Low, the system achieves 159 FPS, which is well above typical monitor refresh rates. Even at 1080p Ultra, 72 FPS indicates the CPU can feed the GPU sufficient draw calls. The CPU's 77th percentile ranking and its closeness to the Intel Core i7-9700 (deltaPct 0.1%) and Intel Core i5-11600K (deltaPct 0.4%) demonstrate that it holds its own against older, higher-tier parts.

The CPU's 12 threads handle the game's multi-threaded workloads efficiently, as shown by the 3dmark_16_threads score of 5873 and the Passmark multithread score of 18747. These scores indicate that Hard West's AI and simulation systems, which often run on multiple threads, will not cause frame hitches. The CPU's memory support for DDR4 and DDR5, with dual-channel configuration, provides adequate bandwidth for the game's data streaming needs. The 18 MB L3 cache reduces latency for frequently accessed game data, contributing to the smooth 1% low performance implied by the consistent average FPS figures.

FAQ

Q: What is the best resolution for this combo in Hard West?

A: The data shows 2560x1440 is the optimal resolution. At Medium settings it delivers 82.1 FPS and at High it delivers 63.3 FPS, both smooth. 1080p is also excellent (101.3 FPS at High), but 4K only exceeds 50 FPS at Low settings.

Q: Why does 4K performance drop so drastically?

A: The RTX 3060 Ti's 8 GB VRAM and 448.0 GB/s bandwidth become insufficient at 3840x2160. The pixel rate of 133.2 GPixel/s and 80 ROPs cannot handle the 4K fill rate demand, causing FPS to fall from 159 at 1080p Low to 50.7 at 4K Low.

Q: Is the CPU or GPU the limiting factor?

A: The GPU is clearly the limiting component. The CPU runs at the 77th percentile of all CPUs, while the GPU sits at the 69th percentile. At 1080p Low, the system achieves 159 FPS, showing the CPU is not constraining performance.

Q: How does this combo rank against other tested systems?

A: This combo ranks 1240th out of 1699 tested combinations. The CPU's nearest rival is the Intel Core i7-9700 (deltaPct 0.1%), and the GPU's nearest rival is the AMD Radeon RX 6700M (deltaPct -0.2%), showing both components perform as expected for their class.

Q: What settings should I use for a smooth 60 FPS experience?

A: At 1080p, use High settings (101.3 FPS) or Ultra (72 FPS). At 1440p, use Medium (82.1 FPS) or High (63.3 FPS). At 4K, only Low (50.7 FPS) approaches 60 FPS; Medium (40.7 FPS) and above fall below.

Q: Is the 8 GB VRAM sufficient for Hard West?

A: Yes, the 8 GB GDDR6 memory is not the bottleneck. The performance scaling from Low to Ultra at each resolution is consistent, indicating that computational limits (shading units, pixel rate) are the constraint, not memory capacity.

Measured FPS Breakdown

1080p (1920x1080):

  • Low: 159 FPS average
  • Medium: 129.9 FPS average
  • High: 101.3 FPS average
  • Ultra: 72 FPS average

1440p (2560x1440):

  • Low: 100.2 FPS average
  • Medium: 82.1 FPS average
  • High: 63.3 FPS average
  • Ultra: 44.8 FPS average

4K (3840x2160):

  • Low: 50.7 FPS average
  • Medium: 40.7 FPS average
  • High: 31.7 FPS average
  • Ultra: 23.9 FPS average

The data shows that the RTX 3060 Ti + Core i5-12400 combo excels at 1080p, where all settings exceed 60 FPS, and at 1440p Medium/High, where it remains playable. The 4K results are only viable at Low settings. The 1440p High result of 63.3 FPS is the recommended balance of visual quality and performance, while 1080p Ultra at 72 FPS offers the highest settings with acceptable frame rates. The Ultra preset at 4K (23.9 FPS) is the only configuration that falls below 30 FPS, making it unsuitable for smooth play.

Hardware Specifications

Intel Core i5-12400

Cores / Threads 6 / 12
Base Clock 2500 MHz
Boost Clock 4400 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-12400 + NVIDIA GeForce RTX 3060 Ti in Hard West

Resolution Settings Avg FPS
3840x2160 Low 50.7
3840x2160 Medium 40.7
3840x2160 High 31.7
3840x2160 Ultra 23.9
2560x1440 Low 100.2
2560x1440 Medium 82.1
2560x1440 High 63.3
2560x1440 Ultra 44.8
1920x1080 Low 159.0
1920x1080 Medium 129.9
1920x1080 High 101.3
1920x1080 Ultra 72.0

Hard West with ii5-12400 + Other GPUs

See how Hard West performs with the same CPU but different graphics cards.

Hard West with RTX 3060 Ti + Other CPUs

See how Hard West performs with the same GPU but different processors.

Other Games with ii5-12400 + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.