Greedfall
This combination provides smooth gameplay with an average of 111 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 63 | 70 | 89 |
| 1440p QHD | 68 | 106 | 117 | 149 |
| 1080p Full HD | 98 | 153 | 168 | 214 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Greedfall with AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis
Greedfall, the 2019 Action RPG from Spiders, presents an interesting test for the AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 3070 Ti. The measured data for this combination reveals a system capable of high refresh rate play at 1080p and solid 60+ FPS performance at 4K, though the demands of Ultra settings show clear limits. This analysis uses only the provided measured FPS rows, CPU and GPU benchmark data, and the combo’s ranking among 2,938 tested configurations to interpret what this hardware pairing delivers in this specific title.
Resolution Scaling
The FPS data across the three tested resolutions shows how the RTX 3070 Ti becomes the primary limiting factor as pixel count increases, while the Ryzen 7 9850X3D’s strong single-thread performance keeps frame rates high at lower resolutions. At 1920x1080 with Low settings, the combo produces 214 FPS average. Moving to 2560x1440 Low drops that to 149 FPS, a 30.4% reduction. At 3840x2160 Low, the average falls to 89 FPS, which is 58.4% below the 1080p result. This scaling pattern is typical of a GPU-bound workload, as the 8-core, 16-thread CPU with a 5.60 GHz boost clock and 96 MB of L3 cache is more than capable of feeding frames at these rates.
The gap between 1440p and 4K is particularly steep. For High settings, the drop from 106 FPS at 2560x1440 to 63 FPS at 3840x2160 represents a 40.6% performance loss. The Medium preset tells a similar story: 117 FPS at 1440p falls to 70 FPS at 4K, a 40.2% decline. This indicates that the RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are being saturated at 4K, especially with higher quality presets that increase texture and shading workloads.
The Ultra preset shows the most dramatic scaling. At 1080p, Ultra averages 98 FPS. At 1440p, that drops to 68 FPS, a 30.6% reduction. At 4K, Ultra plummets to 40 FPS, which is 59.2% below the 1080p figure. The 40 FPS average at 4K Ultra is the only measured result below the 60 FPS threshold, making it clear that this resolution and preset combination is too demanding for the RTX 3070 Ti in Greedfall. The data suggests that the CPU is not the bottleneck here, as even at 1080p Low with 214 FPS, the Ryzen 7 9850X3D’s PassMark single-thread score of 4704 and Cinebench R23 single-core score of 2228 indicate ample headroom.
Comparatively, the delta between Low and Ultra at each resolution grows as resolution increases. At 1080p, Low (214 FPS) to Ultra (98 FPS) is a 54.2% reduction. At 1440p, Low (149 FPS) to Ultra (68 FPS) is a 54.4% reduction. At 4K, Low (89 FPS) to Ultra (40 FPS) is a 55.1% reduction. The consistency of this percentage suggests that the GPU’s shading units, texture units, and ROPs are scaling linearly with workload, and the 4K Ultra result is simply beyond the card’s practical capability for this title.
FAQ
Q: What is the highest average FPS this combo achieves in Greedfall?
A: The highest measured average FPS is 214, achieved at 1920x1080 with Low settings. This is the only result above 200 FPS in the data set.
Q: Is the Ryzen 7 9850X3D holding back the RTX 3070 Ti at 1080p?
A: No. At 1080p Low, the combo reaches 214 FPS, and at 1080p Medium it hits 168 FPS with a minimum of 143 FPS. The CPU’s 5.60 GHz boost clock and 96 MB L3 cache, combined with a PassMark multithread score of 41,318, indicate it can sustain these frame rates without bottlenecking the GPU.
Q: Can this system run Greedfall at 4K smoothly?
A: Yes, but only at lower presets. At 4K Low, the average is 89 FPS, and at 4K Medium it is 70 FPS with a minimum of 59 FPS. At 4K High, the average drops to 63 FPS, while 4K Ultra falls to 40 FPS, which is not smooth for most players.
Q: How does the RTX 3070 Ti compare to its nearest rivals in general GPU benchmarks?
A: The RTX 3070 Ti has a PassMark G3D score of 23,356 and an average benchmark score of 29,945. Its nearest rival, the NVIDIA GeForce RTX 5070 Mobile, scores 29,928 (0.1% higher), and the AMD Radeon RX 6800 scores 30,095 (0.5% higher). The NVIDIA GeForce RTX 2080 Ti is 0.5% lower at 29,783.
Q: What is the best preset for a 60+ FPS experience at 1440p?
A: Medium and High both deliver 60+ FPS at 2560x1440. Medium averages 117 FPS with a minimum of 99 FPS, while High averages 106 FPS. Ultra at 1440p drops to 68 FPS, which is still above 60 but with less headroom.
Q: How does the CPU’s overall performance rank among all tested CPUs?
A: The Ryzen 7 9850X3D sits in the 92nd percentile of all CPUs, with an average benchmark score of 58,386. It is 0.1% faster than the Intel Xeon Platinum 8260M (58,323) and 0.5% faster than the Intel Core i9-14900 (58,115), while being 0.7% slower than the AMD Ryzen AI 9 HX 470 (58,826).
GPU Role
The RTX 3070 Ti’s role in Greedfall is defined by its 8 GB GDDR6X memory, 256-bit bus, and 608.3 GB/s bandwidth, along with its 6,144 shading units and 96 ROPs. These specifications directly influence the measured FPS at higher resolutions and presets. At 4K Ultra, the 40 FPS average indicates that the GPU is overwhelmed by the combined load of high-resolution textures, shading, and post-processing effects. The card’s 21.75 TFLOPS FP32 performance is sufficient for 1080p and 1440p, but the 4K Ultra result shows its limits.
The memory configuration is particularly relevant. With 8 GB of GDDR6X, the RTX 3070 Ti has enough capacity for 1080p and 1440p in Greedfall, but 4K with Ultra settings likely exceeds the memory footprint, causing the FPS to drop to 40. The Medium preset at 4K, which averages 70 FPS with a minimum of 59, suggests that reducing texture quality and other memory-heavy settings relieves pressure on the 8 GB buffer. The card’s 1,575 MHz base clock and 1,770 MHz boost clock are standard for the Ampere architecture, and the data shows that clock speed alone does not determine performance; the memory subsystem and shading units are the limiting factors.
The GPU’s benchmark scores provide context. Its PassMark G3D score of 23,356 places it in the 75th percentile of all GPUs. The nearest rivals in the data set are the RTX 5070 Mobile (0.1% higher average score), RX 6800 (0.5% higher), and RTX 2080 Ti (0.5% lower). In Greedfall specifically, the RTX 3070 Ti’s 4K Medium result of 70 FPS shows that the card can handle moderate settings at high resolution, but the 4K Ultra result of 40 FPS is a clear indicator that this is not a 4K Ultra-capable card for this title. The 1440p results, with High at 106 FPS and Ultra at 68 FPS, suggest the card is well-suited for high refresh rate 1440p gaming, provided the user selects appropriate presets.
The GPU’s 8 nm process node and 17,400 million transistors contribute to its 290 W TDP, which is not mentioned in the FPS data but is relevant to its sustained performance. The card’s 96 ROPs handle pixel output, and the 192 TMUs manage texture filtering, both of which are exercised heavily in Greedfall’s dense environments. The measured FPS at 1080p High (153 FPS) compared to 4K High (63 FPS) shows that the ROP and TMU throughput is sufficient for lower resolutions but becomes a bottleneck at 4K.
Settings Recommendations
Based on the measured FPS rows, the best experience for this combo depends on the target resolution. For 1920x1080, the Medium preset offers an excellent balance: 168 FPS average with a minimum of 143 FPS and a maximum of 194 FPS. This provides a smooth, high refresh rate experience with more visual fidelity than Low (214 FPS) but without the 38.5% performance hit of Ultra (98 FPS). For players with 144 Hz monitors, Medium at 1080p keeps the frame rate above the refresh rate almost always, while High (153 FPS) also works but with less margin.
At 2560x1440, the Medium preset is again the recommended choice. It delivers 117 FPS average with a minimum of 99 FPS and a maximum of 134 FPS, ensuring the frame rate stays above 60 FPS at all times. High is also viable at 106 FPS average, but the minimum FPS is not reported, so Medium’s 99 FPS minimum provides more confidence for consistent performance. Ultra at 1440p (68 FPS) is playable but leaves little headroom for demanding scenes, and the data shows that Medium offers 72.1% more performance than Ultra at this resolution.
For 3840x2160, the Low preset is the only option that provides a comfortable margin above 60 FPS, with an average of 89 FPS. Medium at 4K averages 70 FPS but has a minimum of 59 FPS, which dips below the 60 FPS threshold and could cause noticeable stuttering in busy areas. High at 4K (63 FPS) is borderline, and Ultra (40 FPS) is not recommended for smooth play. The data suggests that 4K players should use Low or Medium, accepting lower visual quality to maintain playable frame rates. Given that the Medium preset’s minimum is 59 FPS, a user could argue it is acceptable, but the Low preset’s 89 FPS average offers a safer experience.
The Ultra preset is consistently the worst performer across all resolutions, with 98 FPS at 1080p, 68 FPS at 1440p, and 40 FPS at 4K. The gap between Medium and Ultra is substantial: at 1080p, Medium (168 FPS) is 71.4% faster than Ultra (98 FPS) in average FPS. At 4K, Medium (70 FPS) is 75% faster than Ultra (40 FPS). This indicates that the Ultra preset’s additional effects are not worth the performance cost on this hardware, and Medium or High provides a better experience.
How This Combo Ranks
The AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 3070 Ti combination ranks 1,012 out of 2,938 tested combos in Greedfall. This places it in the 65.6th percentile of all configurations, meaning it outperforms most tested systems but is not in the top tier. The ranking reflects the RTX 3070 Ti’s mid-range status in the GPU hierarchy, as the CPU is exceptionally strong. The Ryzen 7 9850X3D is in the 92nd percentile of all CPUs, with an average benchmark score of 58,386, while the RTX 3070 Ti is in the 75th percentile of GPUs. The combination of a top-tier CPU with a mid-range GPU results in a system that excels at 1080p and 1440p but struggles at 4K Ultra, which is consistent with the measured FPS data.
The combo’s rank of 1,012 out of 2,938 suggests that many other configurations achieve higher frame rates in Greedfall, likely those pairing the RTX 3070 Ti with even faster CPUs or using higher-end GPUs. However, the data shows that this specific pairing is well-balanced for the game’s requirements. The CPU’s Cinebench R23 multicore score of 22,807 and PassMark multithread score of 41,318 indicate that it can handle any game workload, and the GPU’s performance is the limiting factor. The rank is not a reflection of poor performance but rather the competitive field of 2,938 combos.
Compared to its nearest CPU rivals, the Ryzen 7 9850X3D’s average benchmark score of 58,386 is nearly identical to the Intel Xeon Platinum 8260M (58,323, 0.1% lower) and the Intel Xeon w5-2545 (58,504, 0.2% higher). This means that swapping the CPU for one of these rivals would have minimal impact on Greedfall’s frame rates, as the game is likely GPU-bound at most settings. The GPU’s nearest rivals, such as the RX 6800 (0.5% higher average score) and RTX 2080 Ti (0.5% lower), would produce very similar FPS in this game, as the measured FPS is primarily determined by the RTX 3070 Ti’s own capabilities.
Measured FPS Breakdown
The complete measured FPS data for this combo is as follows. At 1920x1080, the Low preset averages 214 FPS. The Medium preset averages 168 FPS, with a minimum of 143 FPS and a maximum of 194 FPS. The High preset averages 153 FPS, and the Ultra preset averages 98 FPS. These numbers show a clear progression: as settings increase, frame rates decrease, with the largest single drop occurring between Medium (168 FPS) and Ultra (98 FPS), a 41.7% reduction.
At 2560x1440, the Low preset averages 149 FPS. The Medium preset averages 117 FPS, with a minimum of 99 FPS and a maximum of 134 FPS. The High preset averages 106 FPS, and the Ultra preset averages 68 FPS. The transition from Low to Ultra at 1440p results in a 54.4% reduction in average FPS, from 149 to 68. The Medium preset’s minimum of 99 FPS is the highest minimum recorded for any 1440p setting, indicating consistent performance.
At 3840x2160, the Low preset averages 89 FPS. The Medium preset averages 70 FPS, with a minimum of 59 FPS and a maximum of 80 FPS. The High preset averages 63 FPS, and the Ultra preset averages 40 FPS. The 4K Ultra result of 40 FPS is the lowest in the entire data set, and it represents a 55.1% drop from the 4K Low average of 89 FPS. The Medium preset’s minimum of 59 FPS is the only sub-60 FPS minimum recorded in the data, aside from the Ultra averages, which are all below 60 FPS at 4K.
Comparing resolutions, the same settings show significant FPS losses. For Low, 1080p (214 FPS) to 1440p (149 FPS) is a 30.4% drop, and 1440p to 4K (89 FPS) is a 40.3% drop. For Medium, 1080p (168 FPS) to 1440p (117 FPS) is a 30.4% drop, and 1440p to 4K (70 FPS) is a 40.2% drop. For High, 1080p (153 FPS) to 1440p (106 FPS) is a 30.7% drop, and 1440p to 4K (63 FPS) is a 40.6% drop. For Ultra, 1080p (98 FPS) to 1440p (68 FPS) is a 30.6% drop, and 1440p to 4K (40 FPS) is a 41.2% drop. The consistency of these percentage drops across settings confirms that the scaling is resolution-driven, not setting-driven.
The minimum FPS values are only recorded for the Medium preset at each resolution: 143 FPS at 1080p, 99 FPS at 1440p, and 59 FPS at 4K. These minimums provide insight into frame time consistency. At 1080p and 1440p, the minimums are well above 60 FPS, ensuring smooth gameplay. At 4K, the 59 FPS minimum is just below the 60 FPS target, which could result in occasional hitches during intense combat or exploration. The maximum FPS values for Medium are 194 FPS at 1080p, 134 FPS at 1440p, and 80 FPS at 4K, showing that the frame rate varies widely depending on scene complexity.
The data set includes no minimum or maximum FPS for Low, High, or Ultra presets, so the analysis relies solely on average FPS for those settings. The average FPS for Low at 1080p (214 FPS) is nearly 2.4 times the average for Ultra at 4K (40 FPS), illustrating the massive performance range possible with this hardware. For a game released in 2019, Greedfall’s engine scales predictably with resolution and settings, and this combo’s measured FPS shows that the RTX 3070 Ti is the definitive constraint, with the Ryzen 7 9850X3D providing more than enough headroom at every resolution tested.
Hardware Specifications
AMD Ryzen 7 9850X3D
NVIDIA GeForce RTX 3070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 3070 Ti in Greedfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 89.0 |
| 3840x2160 | Medium | 70.0 |
| 3840x2160 | High | 63.0 |
| 3840x2160 | Ultra | 40.0 |
| 2560x1440 | Low | 149.0 |
| 2560x1440 | Medium | 117.0 |
| 2560x1440 | High | 106.0 |
| 2560x1440 | Ultra | 68.0 |
| 1920x1080 | Low | 214.0 |
| 1920x1080 | Medium | 168.0 |
| 1920x1080 | High | 153.0 |
| 1920x1080 | Ultra | 98.0 |
Greedfall with Ryzen 7 9850X3D + Other GPUs
See how Greedfall performs with the same CPU but different graphics cards.
Greedfall with RTX 3070 Ti + Other CPUs
See how Greedfall performs with the same GPU but different processors.
Other Games with Ryzen 7 9850X3D + RTX 3070 Ti
Explore FPS benchmarks for other games using this same hardware combination.