Greedfall
This combination offers playable performance with an average of 56 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 32 | 35 | 44 |
| 1440p QHD | 34 | 53 | 58 | 74 |
| 1080p Full HD | 49 | 77 | 84 | 107 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Greedfall with AMD Ryzen 7 9700F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
The AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 3050 4 GB presents a significant bottleneck scenario in Greedfall. The data indicates that the GPU is the primary limiting factor at higher resolutions, while the CPU provides ample headroom at lower settings. This analysis breaks down the measured performance across all tested configurations.
Resolution Scaling
The measured FPS data reveals a steep performance cliff as resolution increases, which is the classic signature of a GPU-bound workload. At High settings, the average frame rate drops from 77 FPS at 1920x1080 to 53 FPS at 2560x1440, a reduction of 24 FPS. Moving to 3840x2160, the average plummets to 32 FPS, which is a 45 FPS drop from the 1080p result. This represents a total decline of approximately 58% from the starting 1080p figure.
This scaling pattern strongly indicates that the RTX 3050 4 GB's rendering pipeline, specifically its 128-bit memory bus and 192.0 GB/s bandwidth, is saturated as pixel count increases. The 4 GB VRAM capacity is also a factor at 4K, as the card struggles to maintain playable frame rates regardless of the settings preset. Even at Low settings, the 4K average is only 44 FPS, which is below the 1080p High preset's 77 FPS.
The transition from 1080p to 1440p is less severe but still substantial. At Medium settings, the average drops from 84 FPS to 58 FPS. This 26 FPS reduction suggests that the GPU is still the decisive component. The CPU, an 8-core/16-thread Zen 5 part with a boost clock of 5.50 GHz, is unlikely to be the constraint here, as its high single-thread performance is more than sufficient for a 2019 Action RPG like Greedfall.
The data shows that the 9700F's potential is largely untapped at 4K. The gap between Low (44 FPS) and Ultra (20 FPS) at 4K is 24 FPS, demonstrating that even with drastically reduced graphical load, the GPU cannot push frame rates into a comfortable range. This confirms that for this specific combo, resolution scaling is almost entirely governed by the graphics card's capabilities.
FAQ
*Q: What is the best resolution for this CPU and GPU combo in Greedfall?*
A: Based on the measured data, 1920x1080 is the only resolution where the average FPS exceeds 60 on multiple presets. At 2560x1440, the highest average FPS is 74 on Low settings, but all other presets fall below 60 FPS.
Q: How much performance is lost when moving from 1080p to 4K?
A: At High settings, the average frame rate drops from 77 FPS at 1920x1080 to 32 FPS at 3840x2160. This is a 45 FPS reduction, illustrating the severe strain placed on the RTX 3050 4 GB at 4K.
Q: Is the Ultra preset playable at any resolution?
A: No. The Ultra preset yields an average of 49 FPS at 1920x1080, 34 FPS at 2560x1440, and 20 FPS at 3840x2160. None of these results reach the 60 FPS threshold for smooth gameplay.
Q: Does the Low preset provide a stable experience at 1440p?
A: Yes, the data shows a 74 FPS average at 2560x1440 on Low settings. This is the only 1440p configuration that breaks the 60 FPS barrier, though it does so with significantly reduced visual fidelity.
Q: What is the frame rate variance like on Medium settings?
A: The Medium preset is the only one with recorded min and max FPS. At 1920x1080, it ranges from 72 to 97 FPS. At 2560x1440, it ranges from 50 to 67 FPS. At 3840x2160, it ranges from 30 to 40 FPS.
Q: How does this combo rank among all tested configurations for this game?
A: The combo ranks 2570 out of 2938 tested combinations. This places it in the lower percentile, indicating that this hardware pairing is not well-suited for high-end Greedfall performance.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is the definitive bottleneck in this configuration. With a 4 GB GDDR6 memory pool and a 128-bit bus width, its 192.0 GB/s bandwidth is insufficient for the demands of Greedfall at higher resolutions. The benchmark results confirm this, as the 4K Ultra preset produces an average of only 20 FPS, which is effectively unplayable.
The GPU's clock speeds provide some insight into its performance ceiling. The base clock is 1545 MHz, with a boost clock of 1740 MHz. This modest boost headroom, combined with 2048 shading units and 32 ROPs, results in a pixel rate of 55.68 GPixel/s. This is a limiting factor when filling the 8.3 million pixels of a 4K display.
The 4 GB VRAM is a critical constraint. At 3840x2160 with High settings, the card averages 32 FPS. While the VRAM capacity likely forces texture streaming and asset loading to slow down, the core issue is the overall throughput. The fact that Low settings only boost 4K performance to 44 FPS suggests that the GPU's compute and memory subsystems are saturated, not just its memory capacity.
The RTX 3050 4 GB's position in the market is reflected in its 50th percentile ranking among all GPUs. This is a mid-range card, and Greedfall's engine, while not the most demanding of its era, still requires substantial GPU resources to run at high resolutions. The data shows that at 1080p, the card delivers acceptable performance, but its architecture, built on the 8 nm Samsung process with 8,700 million transistors, simply lacks the raw power for 1440p and 4K gaming with this title.
Measured FPS Breakdown
The complete dataset provides a clear picture of the performance envelope. At 1920x1080, the Low preset averages 107 FPS, which is the highest recorded score in the entire test suite. Medium settings average 84 FPS with a range of 72 to 97 FPS. High settings average 77 FPS. The Ultra preset drops to 49 FPS, which is the only 1080p result below the 60 FPS threshold.
Moving to 2560x1440, the performance drops significantly. Low settings still manage a respectable 74 FPS average. Medium settings fall to 58 FPS, with a recorded range of 50 to 67 FPS. High settings average 53 FPS. The Ultra preset is the weakest at this resolution, producing only 34 FPS.
At 3840x2160, the results are consistently low across all presets. The Low setting yields the best result at 44 FPS. Medium settings average 35 FPS, with a minimum of 30 and a maximum of 40 FPS. High settings average 32 FPS. The Ultra preset is the worst performer in the entire dataset, averaging just 20 FPS.
These numbers illustrate a clear pattern: the gap between Low and Medium is relatively small, but the jump to Ultra is punishing. At 1080p, the difference between Low and Ultra is 58 FPS. At 1440p, it is 40 FPS. At 4K, it is 24 FPS. This compression at higher resolutions further confirms that the GPU is the limiting factor, as the relative cost of each setting tier diminishes when the resolution itself overwhelms the hardware.
Settings Recommendations
The goal is to achieve a stable 60 FPS average, and the data shows this is only feasible at 1920x1080. For users with a 1080p display, the High preset is the recommended choice. It delivers a 77 FPS average, which is well above the 60 FPS target, while maintaining a higher level of visual quality than the Medium or Low presets. The Medium preset also performs well at 84 FPS, but High offers a better balance of fidelity and performance.
If a user prioritizes maximum frame rates over visual fidelity, the Low preset at 1920x1080 is the optimal choice, providing a 107 FPS average. However, for a smoother visual experience with better textures and effects, High is the sweet spot. The Ultra preset should be avoided entirely, as its 49 FPS average at 1080p is below the playable threshold and introduces unnecessary stutter risk.
For those who must play at 2560x1440, the Low preset is the only viable option for a 60 FPS experience, averaging 74 FPS. Any other preset at this resolution will result in frame rates in the 30-58 FPS range, which may be acceptable for slower-paced games but is not ideal for the combat and exploration in Greedfall. The data does not support using Medium or High at 1440p for a consistent experience.
At 3840x2160, no preset is recommended. Even the Low preset only averages 44 FPS, which is below the standard for smooth gameplay. The 4K resolution is beyond the capabilities of the RTX 3050 4 GB in this title, and users should either lower their resolution to 1440p or accept a sub-60 FPS experience.
CPU Role
The AMD Ryzen 7 9700F is a high-performance processor that is not the limiting factor in this game. With 8 cores and 16 threads based on the Zen 5 architecture, it offers substantial multi-threaded capability. Its Passmark multithread score of 36470 places it in the 94th percentile of all CPUs, indicating it is a top-tier processor for general and gaming workloads.
The CPU's single-thread performance is also strong, with a Passmark single-thread score of 4691. This is critical for Greedfall, which likely relies on a few primary threads for game logic and physics. The boost clock of 5.50 GHz ensures that these threads can execute quickly, reducing the chance of CPU-induced frame time spikes.
The benchmark data confirms that the CPU is not the bottleneck. The measured FPS drops are consistent with GPU limitations, not CPU stalls. For example, the 4K Ultra preset at 20 FPS is a clear GPU-bound result, as the 9700F has ample headroom to feed the graphics card. The processor's 32 MB of shared L3 cache also helps reduce memory latency, benefiting game performance.
When compared to its nearest rivals, the 9700F shows a negligible performance delta. It is 0.2% behind the Intel Core i7-14700KF, 0.9% ahead of the AMD Ryzen 9 7950X, and 0.7% ahead of the AMD Ryzen 9 7940HX. These differences are within the margin of error for synthetic benchmarks, meaning the 9700F's CPU performance is effectively on par with these high-end alternatives. Since the GPU is the limiting factor, upgrading the CPU would yield no measurable improvement in Greedfall frame rates. The data shows that the 9700F is more than capable of handling this game's CPU demands at any resolution.
Hardware Specifications
AMD Ryzen 7 9700F
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9700F + NVIDIA GeForce RTX 3050 4 GB in Greedfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 44.0 |
| 3840x2160 | Medium | 35.0 |
| 3840x2160 | High | 32.0 |
| 3840x2160 | Ultra | 20.0 |
| 2560x1440 | Low | 74.0 |
| 2560x1440 | Medium | 58.0 |
| 2560x1440 | High | 53.0 |
| 2560x1440 | Ultra | 34.0 |
| 1920x1080 | Low | 107.0 |
| 1920x1080 | Medium | 84.0 |
| 1920x1080 | High | 77.0 |
| 1920x1080 | Ultra | 49.0 |
Greedfall with RTX 3050 4 GB + Other CPUs
See how Greedfall performs with the same GPU but different processors.
Other Games with Ryzen 7 9700F + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.