Greedfall

The AMD Ryzen 7 9700F paired with the NVIDIA GeForce GTX 1070 delivers playable performance in Greedfall at 1080p and 1440p, but the combination is heavily GPU-bound, with the GTX 1070 acting as the primary bottleneck across all tested settings. The data, measured in-game, shows that this combo ranks 2423 out of 2938 tested combinations, placing it in the lower portion of the database, a position that reflects the GPU’s age and mid-range standing rather than the CPU’s capabilities. At 4K, the system struggles, with average frame rates dropping below 40 FPS at most settings, indicating that the GTX 1070’s 8 GB of VRAM and Pascal architecture cannot sustain high resolutions in this Action RPG. The CPU, by contrast, demonstrates robust compute potential, scoring in the 94th percentile among all CPUs, but its strengths are largely untapped in this workload.

FAQ

*Q: What is the overall rank of this CPU and GPU combination in Greedfall?*

A: The combo ranks 2423 out of 2938 tested combinations, which places it in the bottom 18% of all tested systems. This low rank is primarily due to the GPU’s limited performance, as the CPU alone sits in the 94th percentile of all CPUs.

Q: How does the GTX 1070 compare to its nearest rivals in synthetic benchmarks?

A: The GTX 1070 has an average benchmark score of 9780, placing it in the 47th percentile of all GPUs. Its nearest rival, the AMD FirePro W5000, scores 9803, which is 0.2% higher. The NVIDIA Quadro M2000M scores 9832 (0.5% higher), while the NVIDIA Tesla M10 scores 9724 (0.6% lower), and the Tesla C2070 scores 9716 (0.7% lower). This shows the GTX 1070 sits in a tight cluster with these older professional and mobile cards.

Q: What is the best performance you can expect at 1080p with this setup?

A: At 1920x1080 with Low settings, the combo achieves an average of 125 FPS. With Medium settings, the average drops to 98 FPS, and with High settings, it falls to 89 FPS. Ultra settings yield an average of 57 FPS. The minimum FPS was only recorded at Medium settings, showing 83 FPS, with a maximum of 113 FPS.

Q: Does the CPU bottleneck the GPU at any resolution?

A: The data does not suggest a CPU bottleneck. The AMD Ryzen 7 9700F has 8 cores and 16 threads, boosting up to 5.50 GHz, and scores 4691 in single-threaded Passmark tests. Since frame rates scale consistently with resolution changes (e.g., 125 FPS at 1080p Low drops to 86 FPS at 1440p Low), the limiting factor is the GPU, not the processor.

Q: How does the GTX 1070’s memory configuration affect 4K performance?

A: The GTX 1070 has 8 GB of GDDR5 memory on a 256-bit bus with 256.3 GB/s bandwidth. At 3840x2160, the average frame rates are 52 FPS at Low, 40 FPS at Medium, 37 FPS at High, and 23 FPS at Ultra. These figures suggest that at 4K, the GPU’s memory bandwidth and compute capacity are insufficient for smooth gameplay, especially at higher settings.

*Q: Is this combination more limited by CPU or GPU in Greedfall?*

A: The GPU is the clear limiting component. The CPU’s Passmark multi-thread score is 36470, which is in the 94th percentile of all CPUs, while the GPU’s average score of 9780 places it in the 47th percentile. The measured FPS data shows that lowering resolution from 1440p to 1080p yields significant gains (e.g., from 62 to 89 FPS at High settings), which is characteristic of GPU-bound scenarios.

CPU Role

The AMD Ryzen 7 9700F is a desktop processor from the 9000 series, built on the Zen 5 architecture with the Granite Ridge codename. It has 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. This is a modern, high-end CPU, as reflected by its 94th percentile ranking among all CPUs in the database. Its average benchmark score is 69996, which places it in direct competition with several top-tier processors: the AMD Ryzen 9 7940HX scores 69875 (0.2% lower), the Intel Core i7-14700KF scores 70163 (0.2% higher), the AMD Ryzen 9 7950X scores 69515 (0.7% lower), and the Intel Core i7-14700K scores 69355 (0.9% lower). These deltas are minimal, indicating that the 9700F is performance-equivalent to these other flagship chips in synthetic tests.

In Greedfall, the CPU’s role is to feed the GPU with draw calls and handle game logic. The data suggests it does this without becoming a bottleneck. At 1080p Low, the system achieves 125 FPS, which is a high frame rate that would require a capable processor. The CPU’s single-thread score of 4691 in Passmark’s single-thread test is strong, and its multi-thread score of 36470 shows substantial parallel capability. The L3 cache is 32 MB shared, and the processor supports DDR5 memory with a dual-channel bus and 89.6 GB/s bandwidth, which helps maintain consistent data flow in CPU-intensive scenes. However, because the GPU is the weaker component, the CPU’s advantages in cache size, memory bandwidth, and core count are not fully utilized in this game. The measured FPS differences between settings (e.g., 125 FPS at Low versus 57 FPS at Ultra at 1080p) are more attributable to GPU load than CPU performance.

The CPU’s TDP is 65 W, and it uses the AMD Socket AM5 platform. It has 24 PCIe Gen 5 lanes, which provides ample bandwidth for the GPU, though the GTX 1070 only uses PCIe 3.0. The processor’s production status is active, and it was released in September 2025 with a launch MSRP of $289. In benchmark tests, the CPU scores 421988 in data compression, 21488 in data encryption, 33688 in extended instructions, 183 in prime number finding, 77955 in floating point math, 120788 in integer math, 2122 in physics, and 45890 in random string sorting. These numbers are far above what the GPU can handle in terms of compute, reinforcing that the processor is not the limiting factor in this combo.

GPU Role

The NVIDIA GeForce GTX 1070 is from the GeForce 10-series, based on the Pascal architecture and the GP104 chip. It was released in June 2016 and is now end-of-life, but it remains a functional mid-range card. Its base clock is 1506 MHz, with a boost clock of 1683 MHz, and it has 1920 shading units, 120 texture mapping units, and 64 raster output units. The memory is 8 GB of GDDR5 on a 256-bit bus, providing 256.3 GB/s of bandwidth. The GPU’s pixel rate is 107.7 GPixel/s, and its texture rate is 202.0 GTexel/s, with FP32 performance of 6.463 TFLOPS. The TDP is 150 W, requiring a suggested 450 W power supply and a single 8-pin connector.

In the database, the GTX 1070 has an average benchmark score of 9780, placing it in the 47th percentile of all GPUs. Its nearest rivals are all older or specialized cards: the AMD FirePro W5000 scores 9803 (0.2% higher), the NVIDIA Quadro M2000M scores 9832 (0.5% higher), the NVIDIA Tesla M10 scores 9724 (0.6% lower), and the NVIDIA Tesla C2070 scores 9716 (0.7% lower). This clustering shows that the GTX 1070 performs similarly to these professional and mobile GPUs, despite having a different feature set. In specific tests, it scores 1082 in 3DMark Steel Nomad DX12, 18801 in Geekbench Metal, 44700 in Geekbench OpenCL, 22121 in Geekbench Vulkan, and 13498 in Passmark G3D. Its DirectX 11 score is 100, while DirectX 12 is 48, indicating that the card is better suited to older APIs.

For Greedfall, the GPU’s role is dominant. The game was released in September 2019, and the GTX 1070 was already three years old at that point. The measured FPS data shows that the GPU struggles at higher resolutions. At 1080p, the card delivers 125 FPS at Low settings, but this drops to 57 FPS at Ultra. At 1440p, the average at High is 62 FPS, and at 4K, it falls to 37 FPS at High. The 8 GB VRAM is sufficient for 1080p and 1440p, but at 4K Ultra, the average is only 23 FPS, suggesting the card cannot handle the memory pressure and compute load. The GPU’s texture rate of 202.0 GTexel/s and pixel rate of 107.7 GPixel/s are modest by modern standards, and they directly impact how well the card can fill frames in a demanding Action RPG like Greedfall.

How This Combo Ranks

The combination of the AMD Ryzen 7 9700F and the NVIDIA GeForce GTX 1070 ranks 2423 out of 2938 tested combos in Greedfall. This places it in the 17.5th percentile of all tested systems, meaning that about 82.5% of other combinations perform better in this specific game. The rank is heavily influenced by the GPU, as the CPU is a top-tier part. To put this in perspective, the CPU alone sits in the 94th percentile of all CPUs, while the GPU sits in the 47th percentile. The disparity between these two percentiles is stark, and it explains why the combo ranks so low: a high-end processor is being paired with a mid-range GPU that was released in 2016.

Within the database, the GTX 1070’s nearest rivals, such as the AMD FirePro W5000 and NVIDIA Quadro M2000M, have similar average scores, but they are not gaming-focused cards. The combo rank of 2423 indicates that in Greedfall, this system produces frame rates that are acceptable for 1080p gaming but fall short at 1440p and especially 4K. The data shows that the combo achieves 89 FPS at 1080p High, which is smooth, but at 1440p High, it drops to 62 FPS, and at 4K High, it is 37 FPS. These numbers are consistent with a GPU that is two generations old and lacks the raw power for high-resolution gaming.

The rank also suggests that other combos with the same GPU but older CPUs might perform similarly, while combos with the same CPU but newer GPUs would rank much higher. This is because the CPU is overqualified for the GPU, meaning the GPU determines the ceiling. The fact that the combo ranks 2423 out of 2938 is not a reflection of the CPU’s capability but rather the GPU’s limitations in this title. For users with this setup, the data implies that upgrading the GPU would yield substantial FPS improvements, while upgrading the CPU would have little effect on Greedfall performance.

Resolution Scaling

The measured FPS data reveals a clear pattern of scaling from 1080p to 4K, which illustrates the GPU-bound nature of this combo. At 1920x1080, the system achieves 125 FPS at Low, 98 FPS at Medium, 89 FPS at High, and 57 FPS at Ultra. Moving to 2560x1440, the averages drop to 86 FPS at Low, 68 FPS at Medium, 62 FPS at High, and 39 FPS at Ultra. At 3840x2160, the averages fall further to 52 FPS at Low, 40 FPS at Medium, 37 FPS at High, and 23 FPS at Ultra.

The percentage drops are significant. From 1080p Low to 1440p Low, the FPS decreases from 125 to 86, a drop of 31.2%. From 1080p Medium to 1440p Medium, it goes from 98 to 68, a 30.6% reduction. From 1080p High to 1440p High, it drops from 89 to 62, a 30.3% decrease, and from 1080p Ultra to 1440p Ultra, it falls from 57 to 39, a 31.6% drop. These consistent reductions of around 30% across all settings suggest that the GPU is the limiting factor, as the workload scales with pixel count.

When moving from 1440p to 4K, the drops become even more pronounced. At Low settings, the FPS goes from 86 to 52, a 39.5% decrease. At Medium, it goes from 68 to 40, a 41.2% decrease. At High, it goes from 62 to 37, a 40.3% decrease, and at Ultra, it goes from 39 to 23, a 41.0% decrease. These drops are larger than the 1440p to 1080p drops, which indicates that the GPU is running out of headroom at 4K. The 4K resolution requires roughly 2.25 times the pixels of 1440p, and the GTX 1070 cannot maintain frame rates above 40 FPS at any setting other than Low.

The scaling behavior also shows that the CPU is not a constraint. If the CPU were the bottleneck, the FPS would not drop as much when increasing resolution, because the CPU workload would remain constant. Since the FPS drops by roughly 30-40% at each resolution step, the GPU is clearly the component that is saturated. The 8 GB of VRAM on the GTX 1070 is likely a factor at 4K, as the card’s 256.3 GB/s bandwidth may not be sufficient to feed the render pipeline at that resolution. The data shows that the combo is best suited for 1080p gaming, where it can achieve over 60 FPS at High settings, and 1440p at Medium settings, but 4K is not viable for smooth play.

Measured FPS Breakdown

The measured FPS data for this combo in Greedfall is provided for three resolutions and four settings levels, with some entries including minimum and maximum FPS values.

At 1920x1080, the system performs best. With Low settings, the average FPS is 125, with no min or max recorded. At Medium settings, the average is 98 FPS, with a minimum of 83 FPS and a maximum of 113 FPS. High settings produce an average of 89 FPS, and Ultra settings yield an average of 57 FPS. The jump from Medium to High is modest (98 to 89 FPS), but the jump from High to Ultra is severe (89 to 57 FPS), indicating that Ultra settings impose a heavy load on the GPU. The 125 FPS at Low is more than sufficient for smooth gameplay, and even the 89 FPS at High is comfortable for most displays.

At 2560x1440, the performance drops noticeably. Low settings produce an average of 86 FPS. Medium settings yield 68 FPS, with a minimum of 58 FPS and a maximum of 78 FPS. High settings average 62 FPS, and Ultra settings average 39 FPS. At this resolution, the combo is still playable at High settings (62 FPS), but Ultra settings fall below the 60 FPS threshold. The minimum FPS of 58 FPS at Medium settings suggests that the system can occasionally stutter, but for the most part, 1440p gaming is viable at lower settings.

At 3840x2160, the performance is marginal. Low settings produce an average of 52 FPS. Medium settings average 40 FPS, with a minimum of 34 FPS and a maximum of 47 FPS. High settings average 37 FPS, and Ultra settings average 23 FPS. None of these averages reach 60 FPS, and even the Low setting at 52 FPS is below the ideal threshold for smooth gameplay. The 34 FPS minimum at Medium settings indicates that the system can dip into the low 30s during demanding scenes, which would be noticeable to the player. At 4K, the combo is only suitable for Low settings, and even then, the average of 52 FPS is suboptimal.

The data also shows that the minimum and maximum FPS values were only recorded for Medium settings at each resolution. At 1080p Medium, the range is 83 to 113 FPS, a spread of 30 FPS. At 1440p Medium, the range is 58 to 78 FPS, a spread of 20 FPS. At 4K Medium, the range is 34 to 47 FPS, a spread of 13 FPS. This narrowing range at higher resolutions suggests that the GPU is consistently maxed out, leading to less variance in frame times. In contrast, at 1080p Medium, the wider range indicates that the GPU has more headroom, and frame rates vary more depending on the scene complexity.

Overall, the measured FPS confirms that this combo is best used at 1080p with High settings or lower, where it delivers smooth performance. At 1440p, the system can handle Medium settings at around 68 FPS, but High settings at 62 FPS are borderline. At 4K, the system is not recommended for anything above Low settings, and even then, the frame rates are below 60 FPS. The GTX 1070’s age and mid-range positioning are the primary reasons for these results, as the Ryzen 7 9700F has ample compute power to drive higher frame rates if paired with a more capable GPU.