Greedfall

Greedfall, the 2019 Action RPG from Spiders, presents an interesting case study for the AMD Ryzen 7 5700X3D and AMD Radeon RX 9060 pairing. The measured frame rates across resolutions and settings reveal a system that is capable of delivering smooth gameplay at mainstream resolutions, but which begins to show its limits as the pixel count climbs. The data indicates a configuration where the CPU provides ample headroom, while the GPU becomes the primary constraint at higher graphical loads. This analysis breaks down the performance characteristics, component roles, and overall ranking of this specific combination.

Resolution Scaling

The measured FPS data for this combo shows a clear and predictable scaling pattern as resolution increases. At 1920x1080 with High settings, the system produces an average of 119 FPS. Moving to 2560x1440 High, the average drops to 83 FPS, and at 3840x2160 High, it falls further to 49 FPS. This represents a performance reduction of approximately 30% when moving from 1080p to 1440p, and a further 41% drop when moving from 1440p to 4K. The scaling from 1080p to 4K High settings shows the average frame rate dropping by about 59%, from 119 to 49 FPS.

This scaling pattern strongly indicates that the GPU is the limiting component at higher resolutions. The frame rate drops are substantial and consistent with a graphics card that is being increasingly taxed as the number of pixels rendered grows. At 1080p, the system has enough headroom to produce high frame rates, but the load on the GPU becomes progressively more intense, and the average FPS drops accordingly. The data suggests that at 4K, the AMD Radeon RX 9060 is working near its limits, with the High preset yielding only 49 FPS.

Examining the Low settings across resolutions further confirms this. At 1080p Low, the system achieves 167 FPS. At 1440p Low, that figure drops to 116 FPS, and at 4K Low, it is 69 FPS. The drop from 1080p to 1440p is about 31%, and from 1440p to 4K is about 41%. Even at the lowest graphical settings, the 4K resolution proves to be a significant challenge. The fact that the Low preset at 4K (69 FPS) is still substantially lower than the High preset at 1080p (119 FPS) reinforces that the resolution is the dominant factor in determining performance.

The pattern of performance loss is not linear, with a steeper decline observed when moving to 4K. This suggests that the GPU's memory bandwidth or raw shading power becomes a bottleneck at that resolution. The 8 GB VRAM capacity of the RX 9060 might also be a contributing factor at 4K, as texture and geometry data requirements increase significantly. The data shows a system that is well-suited for 1080p and 1440p gaming, but which will require compromises at 4K to maintain playable frame rates.

CPU Role

The AMD Ryzen 7 5700X3D is an 8-core, 16-thread processor based on the Zen 3 architecture. It has a base clock of 3.00 GHz and a boost clock of 4.10 GHz. The processor features a substantial 96 MB of shared L3 cache, which is a key characteristic for gaming performance. In the context of Greedfall, the CPU appears to be more than sufficient for the task, as evidenced by the high frame rates at lower resolutions where the GPU is not the primary bottleneck.

At 1080p with Low settings, the system achieves 167 FPS. Such a high frame rate indicates that the Ryzen 7 5700X3D is capable of feeding the GPU with enough data to maintain a high output. The CPU's 8 cores and 16 threads are likely more than enough for Greedfall, which is a game from 2019 and may not be heavily multithreaded. The large L3 cache could also help with game data access, reducing latency and improving overall system responsiveness.

The CPU's benchmark scores provide context for its performance. In Cinebench R23, it scores 22366 in multi-core and 3157 in single-core. In Geekbench, it scores 11086 in multi-core and 1849 in single-core. These scores place it in the 77th percentile of all CPUs, indicating a strong performer. Its nearest rivals according to average benchmark score include the AMD Ryzen 5 7600X3D, which is 0.1% faster, and the Intel Core i5-11600, which is 0.6% slower. This shows the 5700X3D is a very competitive part, especially for gaming.

The CPU's single-thread performance, as shown by a Geekbench single-core score of 1849, is solid, which is important for games that rely on a few primary threads. The boost clock of 4.10 GHz is respectable, and the processor's overall capabilities are well-matched to the GPU in this system. The data shows that the CPU is not a limiting factor in Greedfall, as the performance scaling is clearly tied to the resolution and thus the GPU's workload.

GPU Role

The AMD Radeon RX 9060 is built on the RDNA 4.0 architecture and features the Navi 44 chip. It has 8 GB of GDDR6 memory on a 128-bit bus, providing a memory bandwidth of 288.0 GB/s. The GPU has a base clock of 1700 MHz, a game clock of 2400 MHz, and a boost clock of 2990 MHz. With 1792 shading units, 112 TMUs, and 64 ROPs, the RX 9060 is a capable mid-range graphics card.

The GPU's role in Greedfall is the primary determinant of frame rates at higher resolutions. The data clearly shows that as resolution increases, the average FPS drops significantly. At 1080p High, the GPU is able to produce 119 FPS, but at 4K High, it only manages 49 FPS. This indicates that the GPU's raw compute and memory bandwidth are being saturated at the higher resolution.

The RX 9060 has a Passmark G3D score of 17631 and a 3DMark Steel Nomad DX12 score of 3322. These scores place it in the 59th percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce RTX 3060 Ti, which has an average score that is 0.7% higher, and the AMD Radeon RX 7700, which is 1% lower. This suggests that the RX 9060 is positioned in the same performance tier as an RTX 3060 Ti, making it a solid option for 1080p and 1440p gaming.

The GPU's 8 GB of VRAM could be a potential limitation at 4K with higher texture settings. While the data does not explicitly show a VRAM-related issue, the significant drop in performance at 4K suggests that the memory subsystem might be strained. The 128-bit memory bus, while providing 288.0 GB/s of bandwidth, is narrower than what is found on higher-end cards. This could be a limiting factor in memory-intensive scenarios. The GPU's performance at 4K, where even the Low preset only yields 69 FPS, highlights that this is not a 4K-focused component.

How This Combo Ranks

In the benchmark database, this specific combination of the AMD Ryzen 7 5700X3D and AMD Radeon RX 9060 is ranked 1672 out of 2938 tested combos for Greedfall. This places it in the 43rd percentile of all combinations. This ranking is a holistic measure that considers the overall performance of the pair across all tested settings and resolutions.

A rank of 1672 out of 2938 indicates that while this is a competent system, there are many other combinations that achieve higher performance in this specific game. This is not surprising, as the RX 9060 is a mid-range GPU, and the ranking is against all possible CPU and GPU combinations. The data suggests that this combo is representative of a mainstream gaming system that will handle the game well at 1080p and 1440p, but will not be at the top of the performance charts.

The combo's rank is influenced by both the CPU and GPU. The Ryzen 7 5700X3D is a strong CPU, but the RX 9060 holds the system back at higher resolutions. The overall ranking reflects this balance. The system is not a top-tier performer, but it is also not a low-end one. It sits in the middle of the pack, which is consistent with the individual component positioning. The CPU is in the 77th percentile of all CPUs, while the GPU is in the 59th percentile, and the final combo ranking is a combination of these factors.

The deltaPct values for the CPU's nearest rivals show that it is nearly identical in average benchmark score to the AMD Ryzen 5 7600X3D and the AMD Ryzen 9 5900HX. This means that swapping the CPU for one of these would likely result in very similar gaming performance. Similarly, the GPU's nearest rival, the NVIDIA GeForce RTX 3060 Ti, is only 0.7% faster on average, suggesting that this combo would perform similarly to one with that GPU. This places the system in a well-understood performance tier.

FAQ

Q: What is the average frame rate for this combo in Greedfall at 1920x1080 with High settings?

A: The measured average frame rate is 119 FPS. This indicates that the system is well-suited for high-refresh-rate gaming at 1080p with High settings.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160 with High settings, the average frame rate drops to 49 FPS. Even with Low settings, the average is only 69 FPS, indicating that 4K is a challenging resolution for this GPU.

Q: Is the AMD Ryzen 7 5700X3D a limiting factor in this game?

A: The data suggests it is not. At 1080p with Low settings, the system achieves 167 FPS. The high frame rates at lower resolutions indicate the CPU has sufficient headroom to not bottleneck the GPU.

Q: What is the GPU's performance percentile compared to all other GPUs?

A: The AMD Radeon RX 9060 is in the 59th percentile of all GPUs based on its average benchmark score. This places it in the mid-range of graphics cards.

Q: How does this combo rank compared to all other tested combinations in Greedfall?

A: This specific combo is ranked 1672 out of 2938 tested combinations. This places it in the lower half of the overall performance distribution.

Q: What is the boost clock of the AMD Ryzen 7 5700X3D?

A: The boost clock is 4.10 GHz. This is the maximum clock speed the processor can achieve under load, contributing to its strong single-thread performance.

Settings Recommendations

The measured FPS data provides a clear picture of which settings are optimal for different resolutions. For a smooth gaming experience, the data suggests specific presets to use at each resolution. The goal is to maintain a frame rate that is consistently above 60 FPS for fluid gameplay.

At 1920x1080, the system has substantial performance headroom. The High preset delivers an average of 119 FPS, which is excellent. The Ultra preset, which drops the average to 76 FPS, is also a viable option. Even the Medium preset, at 131 FPS, offers a high frame rate. For the best visual experience without sacrificing performance, the High preset is recommended, as it provides a significant jump in graphical quality over Medium while still delivering a very high frame rate. The Ultra preset is also playable, but the 36% drop in performance from High may not be worth the marginal visual improvement.

At 2560x1440, the High preset is the best choice. It delivers an average of 83 FPS, which is well above the 60 FPS threshold for smooth gameplay. The Medium preset, at 91 FPS, is also a good option if you prefer a higher frame rate. The Ultra preset, with an average of 53 FPS, falls below the 60 FPS target and is not recommended if you are sensitive to frame rate drops. The Low preset, at 116 FPS, is an option for competitive play, but the visual quality is significantly reduced. The data shows that High is the sweet spot for 1440p, offering a good balance between visual fidelity and performance.

At 3840x2160, the situation is more challenging. The High preset only yields 49 FPS, which is below the 60 FPS target. The Medium preset is slightly better at 54 FPS, but still not ideal. The Low preset, at 69 FPS, is the only setting that consistently breaks the 60 FPS barrier. For a playable experience at 4K, the Low preset is the recommended choice. If you want to play at higher settings, you will have to accept a frame rate in the 40s to 50s, which may be acceptable for a slower-paced Action RPG, but is not ideal for a smooth experience. The data is clear: this system is not designed for 4K gaming with high visual fidelity.

The Medium preset across all resolutions shows a consistent pattern. At 1080p, it delivers 131 FPS, at 1440p it delivers 91 FPS, and at 4K it delivers 54 FPS. The minimum FPS values for the Medium preset are 112 at 1080p, 77 at 1440p, and 46 at 4K. This indicates that even in demanding scenes, the frame rate remains relatively stable. For users who want a balance between quality and performance, the Medium preset is a solid fallback option, especially at 1440p where it provides a high frame rate with better visuals than Low. However, for the best overall experience at 1080p and 1440p, the High preset is the clear winner based on the measured data.