Greedfall

The AMD Ryzen 5 7500X3D is a 6-core, 12-thread processor based on the Zen 4 Raphael architecture, built on a 5 nm process. It operates with a base clock of 4.00 GHz and a boost clock of 4.50 GHz, and its L3 cache totals 96 MB shared across the cores. The CPU’s PassMark single-thread score is 3494, while its multithread score is 25047. In synthetic benchmarks, it sits in the 89th percentile of all CPUs, with an average benchmark score of 44573. Its nearest rival, the Intel Core i5-14600, scores 44889, which is a deltaPct of -0.7, meaning the Intel part is marginally ahead. The 7500X3D’s performance in this test context is not about brute core count but about efficiency and cache depth, which matters for an Action RPG like Greedfall.

This CPU’s 6-core/12-thread configuration is relatively modest by modern standards, but the 96 MB L3 cache is a significant asset. The data in the measured FPS rows suggests that the CPU is capable of feeding the GPU at very high frame rates. At 1080p with Low settings, the combo achieves 351 FPS, which is an extreme case. The difference between the Low and Ultra presets at 1080p is 191 FPS (from 351 down to 160), which indicates that the CPU has enough headroom to process the game’s logic and draw calls even when the GPU is under less load. The CPU’s memory bandwidth is rated at 83.2 GB/s over a dual-channel DDR5 bus, which is a standard figure for its platform. The chip’s TDP is 65 W, a low figure that suggests it runs cool and doesn’t throttle easily under sustained gaming loads, though the benchmark data does not explicitly measure thermals.

The PassMark data compression score of 271649 and integer math score of 70774 highlight the CPU’s strength in computational tasks, but for gaming, the single-thread performance is often the bottleneck. The 7500X3D’s single-thread score of 3494 is not the highest on the market, yet the measured FPS in Greedfall at 1080p Medium (276 FPS) and High (250 FPS) shows that the combination is far from being CPU-limited in most scenarios. The data implies that the CPU’s large cache helps with game asset streaming and reducing latency, which is crucial for maintaining high average FPS. The core clock multiplier is locked, so there is no manual overclocking headroom, but the stock performance is sufficient to drive the RTX 4090 to its limits, as will be seen in the resolution scaling section.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500X3D and the NVIDIA GeForce RTX 4090 achieves a combo rank of 127 out of 2938 tested combinations in Greedfall. This places it in the top 4.3% of all combos in the database, which is a strong showing. The rank of 127 is not the absolute top, but it is a high percentile position that indicates the hardware is well-matched for this game. The data shows that this combo outperforms the vast majority of other CPU-GPU pairings, with only 126 combinations being faster. This ranking is based on the measured FPS rows, which include a range of resolutions and settings.

The fact that this combo is ranked 127th rather than higher suggests that there are some other processors that can extract even more performance from the RTX 4090 in this specific title. The nearest rivals for the CPU alone include the Intel Core i9-13950HX, which has a similar average score of 44342, a deltaPct of 0.5. This implies that the 7500X3D is competitive with higher-end laptop processors in raw compute, but in gaming, the 96 MB L3 cache might give it an edge in certain workloads. However, the combo rank of 127 is what matters here, and it confirms that the RTX 4090 is the dominant component in this pairing, with the CPU providing enough support to avoid being a significant bottleneck.

The ranking data is measured, not estimated, which adds credibility to the results. The fact that the combo is in the 127th position out of 2938 means it is in the 95.7th percentile of tested combos. This is a valuable data point for anyone considering this hardware for Greedfall, as it suggests that the experience will be smooth and high-FPS across most settings. The gap between this combo and the top-ranked ones is not specified in the fact pack, but the rank itself tells us that there are a few other pairings that achieve slightly higher average FPS. The implication is that while this is an excellent setup, it is not the absolute pinnacle for this game, possibly due to the CPU’s 6-core limit in a title that might scale with more cores, though the measured FPS at lower resolutions suggests the opposite.

Resolution Scaling

The measured FPS data across resolutions reveals how the system scales from 1080p to 4K. At 1080p with Low settings, the combo hits 351 FPS. Moving to 1440p at Low settings, the FPS drops to 243, a reduction of 108 FPS or about 30.8%. At 4K with Low settings, the FPS falls to 145, which is a 58.6% drop from 1080p and a 40.3% drop from 1440p. This scaling pattern is typical for a GPU-bound scenario at lower settings, where the CPU is not the limiting factor, and the GPU’s rendering load increases with pixel count. The RTX 4090’s 24 GB of GDDR6X memory and 1.01 TB/s bandwidth are more than sufficient for 4K, but the raw pixel throughput becomes the constraint.

At High settings, the pattern is similar but with lower absolute numbers. 1080p High yields 250 FPS, 1440p High yields 174 FPS, and 4K High yields 104 FPS. The drop from 1080p to 1440p is 76 FPS (30.4%), and from 1440p to 4K is 70 FPS (40.2%). This consistent percentage drop across settings suggests that the scaling is driven by the GPU’s fill rate and shading capacity, not by the CPU. The CPU’s role is to maintain a high enough frame rate ceiling, and the fact that the 1080p Low result is 351 FPS shows that the CPU can push far beyond what the GPU can render at higher resolutions.

The Medium preset at 4K shows an average of 114 FPS with a minimum of 97 and maximum of 131. The difference between the average and the minimum is 17 FPS, which is a relatively tight range, indicating stable performance. At 1080p Medium, the average is 276 FPS with a minimum of 234 and maximum of 317, showing a wider variance of 42 FPS. This wider variance at lower resolutions suggests that the CPU is occasionally causing frame dips, as the GPU is less loaded and can render frames faster than the CPU can prepare them. The Ultra preset at 4K drops to 66 FPS, which is a significant reduction from High’s 104 FPS, showing that Ultra settings impose a heavy GPU workload. The data implies that the limiting component shifts from CPU at 1080p Low to GPU at 4K Ultra, with the crossover point being somewhere around 1440p High where the balance is optimal.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance across all tested configurations. At 1920x1080, the Low preset achieves an average of 351 FPS. This is the highest FPS in the entire dataset, and it indicates that the CPU is the primary driver at this resolution and settings level, with the GPU having ample headroom. The Medium preset at 1080p averages 276 FPS, with a minimum of 234 and a maximum of 317. The High preset averages 250 FPS, and the Ultra preset averages 160 FPS. The progression from Low to Ultra at 1080p shows a drop of 191 FPS, which is a 54.4% reduction. This is a substantial difference, demonstrating that Greedfall’s Ultra settings are significantly more demanding, likely due to increased draw distances, shadow quality, and post-processing effects.

At 2560x1440, the Low preset averages 243 FPS, which is still very high and indicates that the GPU is now becoming more of a factor, but the CPU is still capable. The Medium preset at 1440p averages 191 FPS, with a minimum of 163 and a maximum of 220. The High preset averages 174 FPS, and the Ultra preset averages 111 FPS. The drop from Low to Ultra at 1440p is 132 FPS, a 54.3% reduction, which is consistent with the 1080p scaling. This consistency suggests that the relative cost of Ultra settings is uniform across resolutions, as it is a GPU-side effect. The 1440p Medium data shows a variance of 57 FPS between minimum and maximum, which is larger than at 4K, again pointing to the CPU being more involved in frame pacing at lower GPU loads.

At 3840x2160, the Low preset averages 145 FPS, which is still playable but a significant drop from 1080p. The Medium preset averages 114 FPS, with a minimum of 97 and a maximum of 131. The High preset averages 104 FPS, and the Ultra preset averages 66 FPS. The Ultra result at 4K is the lowest in the dataset, and it shows that this combo can still handle 4K Ultra but with a frame rate that might not be ideal for competitive play, though it is smooth for an action RPG. The variance at 4K Medium is 34 FPS, which is tighter than at lower resolutions, indicating that the GPU is the sole limiting factor and is being consistently utilized. The data shows that the sweet spot for 4K is the Medium or High preset, where the average FPS stays above 100.

GPU Role

The NVIDIA GeForce RTX 4090 is the dominant component in this combo, with a massive 24 GB of GDDR6X memory on a 384-bit bus, providing a bandwidth of 1.01 TB/s. The GPU’s boost clock is 2520 MHz, and it has 16384 shading units, 512 TMUs, and 176 ROPs. Its FP32 performance is rated at 82.58 TFLOPS, which is an enormous amount of compute power. The GPU’s PassMark G3D score is 38194, and its average benchmark score is 60347, placing it in the 88th percentile of all GPUs. Its nearest rival in benchmarks is the Intel Arc Pro A60, which has a score of 60326, a deltaPct of 0, meaning they are essentially tied in that specific synthetic test, though the RTX 4090 is clearly designed for gaming.

In Greedfall, the GPU’s role is to render the game’s environments, characters, and effects. The measured FPS data shows that the RTX 4090 is the primary bottleneck at higher resolutions and settings. At 4K Ultra, the average FPS is 66, which is a stark contrast to the 160 FPS at 1080p Ultra. This 94 FPS drop is directly attributable to the GPU’s pixel and shading workload increasing with resolution. The GPU’s 24 GB VRAM is more than enough for this game, even at 4K Ultra, so memory capacity is not a limiting factor. The memory bandwidth of 1.01 TB/s ensures that texture streaming is not an issue, even with high-resolution assets.

The GPU’s performance in this game is consistent with its hardware specifications. The fact that it can achieve 351 FPS at 1080p Low shows that it is not the limiting factor at that setting, but as the resolution increases, its limitations become apparent. The 4K Medium result of 114 FPS is a good indicator of the GPU’s capabilities, as it balances visual quality with performance. The data suggests that the RTX 4090 is overkill for 1080p gaming, as the CPU is likely the bottleneck there, but it excels at 1440p and 4K, where its raw power is fully utilized. The GPU’s TDP is 450 W, and it requires a suggested PSU of 850 W, which is a high power draw, but the benchmark data does not include power consumption metrics for this specific game.

FAQ

Q: What is the maximum average FPS achievable with this combo in Greedfall?

A: The maximum average FPS recorded is 351, achieved at 1920x1080 resolution with Low settings. This is the highest value in the measured FPS data, indicating that the combo can push very high frame rates when GPU load is minimal.

Q: How does the combo rank against other tested CPU-GPU pairings in Greedfall?

A: The combo ranks 127th out of 2938 tested combinations. This places it in the top 4.3% of all combos, showing that it is a high-performing pairing for this game, though not the absolute fastest.

Q: What is the performance difference between 1080p and 4K at Ultra settings?

A: At 1080p Ultra, the average FPS is 160, while at 4K Ultra, it drops to 66. This represents a 94 FPS reduction, or a 58.75% decrease in performance, demonstrating the significant GPU load increase at higher resolutions.

Q: Is the CPU or GPU the limiting factor at 1440p Medium settings?

A: At 1440p Medium, the average FPS is 191, with a minimum of 163 and a maximum of 220. The variance of 57 FPS suggests that the CPU is occasionally causing frame dips, making it a partial limiter, but the GPU is still the primary bottleneck for the average frame rate.

Q: What is the lowest average FPS recorded for this combo, and at what settings?

A: The lowest average FPS is 66, recorded at 3840x2160 resolution with Ultra settings. This is the most demanding configuration in the dataset, and the combo still maintains a playable frame rate for an action RPG.

Q: How does the CPU’s single-thread performance compare to its multithread performance in the context of gaming?

A: The CPU’s single-thread score is 3494, while its multithread score is 25047. The single-thread score is more relevant for gaming, and the measured FPS at 1080p Low (351 FPS) shows that the CPU is not a bottleneck at lower resolutions, though its 6-core limit might affect scaling in other titles.

Settings Recommendations

Based on the measured FPS rows, the optimal settings depend on the target resolution and desired frame rate. For 4K gaming, the Medium preset offers the best balance, with an average FPS of 114 and a minimum of 97. This ensures that the frame rate stays above 90 FPS even in demanding scenes, which is smooth for an action RPG. The High preset at 4K averages 104 FPS, which is also good, but the Medium preset provides a higher minimum FPS and a tighter variance, making it the safer choice for consistent performance. The Ultra preset at 4K drops to 66 FPS, which is playable but not ideal, so it is recommended only for players who prioritize visual fidelity over frame rate.

At 1440p, the High preset is the recommended choice, with an average of 174 FPS. This provides a high frame rate that will be smooth on most high-refresh monitors. The Medium preset at 1440p averages 191 FPS, which is higher, but the High preset likely offers better visual quality without a significant performance hit. The Ultra preset at 1440p averages 111 FPS, which is still very playable, but the jump from High to Ultra is 63 FPS, which is a large cost for potentially marginal visual improvements. For competitive play, the Low preset at 1440p offers 243 FPS, but this is likely unnecessary for a single-player action RPG.

At 1080p, the Ultra preset is viable, with an average of 160 FPS. This provides the best visual experience while still maintaining a frame rate well above 144 Hz. The High preset at 1080p averages 250 FPS, which is excellent for high-refresh monitors, but the visual difference between High and Ultra might be noticeable. The Medium preset at 1080p averages 276 FPS, which is overkill for most displays, but it ensures maximum fluidity. The Low preset at 1080p is not recommended, as the 351 FPS result is far beyond what most monitors can display, and the visual quality is significantly reduced. The data suggests that the best overall experience across all resolutions is the High preset, as it provides a strong balance of visual quality and performance, with average FPS of 250 at 1080p, 174 at 1440p, and 104 at 4K.