Greedfall

Greedfall

AVERAGE FPS
151
excellent

This combination delivers exceptional performance with an average of 151 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 86 95 120
1440p QHD 92 144 159 202
1080p Full HD 133 208 229 291

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 120
3840x2160 Medium 95
3840x2160 High 86
3840x2160 Ultra 55
2560x1440 Low 202
2560x1440 Medium 159
2560x1440 High 144
2560x1440 Ultra 92
1920x1080 Low 291
1920x1080 Medium 229
1920x1080 High 208
1920x1080 Ultra 133

Greedfall with AMD Ryzen 5 5600G + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis

Resolution Scaling

The measured FPS data for Greedfall shows a clear progression as resolution increases. At 1920x1080 with High settings, the combo delivers 208 FPS average. Moving to 2560x1440 drops that to 144 FPS, a reduction of 64 FPS or roughly 30.8%. At 3840x2160, the average falls to 86 FPS, which is 41.3% lower than the 1440p result and 58.7% lower than the 1080p figure.

The scaling pattern across all settings tiers tells a consistent story. Low settings at 1080p produce 291 FPS, at 1440p they produce 202 FPS, and at 4K they produce 120 FPS. That is a 58.8% drop from 1080p to 4K. Medium settings follow a similar trajectory: 229 FPS at 1080p, 159 FPS at 1440p, and 95 FPS at 4K, a 58.5% reduction across the full range. High settings lose 58.7% from 1080p to 4K, and Ultra settings lose 58.6% over the same span.

The consistency of these percentage drops is notable. Regardless of whether the game runs at Low or Ultra, the resolution penalty from 1080p to 4K lands in a tight band around 58% to 59%. That uniformity indicates the bottleneck shifts in a predictable manner. At 1080p, the CPU has more headroom to feed frames, but the GPU still manages to produce very high frame rates. At 4K, the GPU becomes the primary limiter, and the frame rate settles into a range that reflects the graphics card's raw throughput rather than the processor's ability to issue draw calls.

The gap between Low and Ultra settings widens as resolution increases. At 1080p, Low delivers 291 FPS while Ultra delivers 133 FPS, a difference of 158 FPS or 118.8% higher for Low. At 4K, Low delivers 120 FPS while Ultra delivers 55 FPS, a difference of 65 FPS or 118.2% higher for Low. The relative gap stays nearly identical, which suggests the settings scaling is not interacting with resolution in a way that shifts the balance between CPU and GPU load.

The 4K Ultra result of 55 FPS is the only measured point below 60 FPS. Every other resolution and settings combination stays above that threshold. The 4K Medium result includes a recorded minimum of 80 FPS and a maximum of 109 FPS, while the 1440p Medium result shows a minimum of 135 FPS and a maximum of 182 FPS. The 1080p Medium result has a minimum of 194 FPS and a maximum of 263 FPS. These ranges indicate that even the lowest recorded frames stay well within playable territory for all but the most demanding configuration.

CPU Role

The AMD Ryzen 5 5600G uses the Zen 3 architecture on a 7 nm process from TSMC. It has 6 cores and 12 threads, with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. The processor includes 16 MB of L3 cache, 512 KB of L2 per core, and 64 KB of L1 per core. It supports dual-channel DDR4 memory with a bandwidth of 51.2 GB/s.

The CPU's benchmark scores place it in the 74th percentile among all tested processors. Its average benchmark score is 21088. The nearest rivals in the database are the Intel Core i3-1220P with an average score of 21066 and a delta of 0.1%, the Intel Core Ultra 7 256V with an average score of 21112 and a delta of -0.1%, the AMD Ryzen 5 7530U with an average score of 21133 and a delta of -0.2%, and the Intel Core Ultra 7 155U with an average score of 21174 and a delta of -0.4%. This places the 5600G in a tight cluster where performance differences among close competitors are within a fraction of a percent.

In Cinebench R23, the processor scores 10551 in multi-core and 1409 in single-core. The single-core score of 1409 is roughly 13.4% of the multi-core score, which reflects the scaling efficiency of 6 cores and 12 threads. Geekbench results show 8428 in multi-core and 1801 in single-core. The PassMark multi-thread score is 19717, and the single-thread score is 3177.

For Greedfall specifically, the frame rates at 1080p provide indirect evidence of CPU capability. At Low settings, the combo reaches 291 FPS, which is high enough that the CPU must be capable of issuing a substantial number of frames per second. At Medium settings, the result is 229 FPS, and at High settings it is 208 FPS. These numbers suggest the processor is not the limiting factor at lower resolutions, because the GPU is still able to produce frame rates that would expose CPU-bound scenarios if they existed.

The 3DMark thread scaling scores show how the CPU behaves under different thread counts. The single-thread score is 872, the 2-thread score is 1705, the 4-thread score is 3258, the 8-thread score is 4694, and the 16-thread score is 5451. The jump from 4 threads to 8 threads is 1436 points, while the jump from 8 threads to 16 threads is only 757 points. This indicates diminishing returns beyond 8 threads, which is relevant for a game like Greedfall that may not fully utilize all 12 threads.

The processor's TDP is 65 W, and it includes integrated Radeon Vega 7 graphics, though the discrete GPU handles all rendering in this configuration. The CPU supports PCIe Gen 3 with 16 lanes, which is sufficient for the RTX 4070 Ti's PCIe 4.0 x16 interface, though the older standard may slightly limit bandwidth in theory. In practice, the measured frame rates do not show any obvious penalty from this interface generation.

GPU Role

The NVIDIA GeForce RTX 4070 Ti uses the Ada Lovelace architecture on a 5 nm process from TSMC. It has 7680 shading units, 240 texture mapping units, and 80 raster operation units. The chip includes 60 ray tracing cores and 240 tensor cores. The base clock is 2310 MHz and the boost clock is 2610 MHz.

The memory subsystem consists of 12 GB of GDDR6X on a 192-bit bus, with a bandwidth of 504.2 GB/s. The memory clock is 1313 MHz with 21 Gbps effective data rate. The GPU's pixel rate is 208.8 GPixel/s and its texture rate is 626.4 GTexel/s. FP32 performance is 40.09 TFLOPS, and FP16 matches that at 40.09 TFLOPS with a 1:1 ratio.

The GPU's benchmark scores place it in the 84th percentile among all tested graphics cards. Its average benchmark score is 44795. The nearest rivals in the database are the NVIDIA GeForce RTX 5090 Mobile with an average score of 45152 and a delta of -0.8%, the AMD Radeon Pro 5500 XT with an average score of 45384 and a delta of -1.3%, the NVIDIA RTX A6000 with an average score of 44075 and a delta of 1.6%, and the Intel Arc A730M with an average score of 45592 and a delta of -1.7%. The RTX 4070 Ti sits slightly below the mobile RTX 5090 and the Radeon Pro 5500 XT, while outperforming the RTX A6000 by 1.6%.

In Greedfall, the GPU's role becomes more pronounced as resolution increases. At 4K, the frame rates range from 55 FPS at Ultra to 120 FPS at Low. The spread of 65 FPS between the lowest and highest settings at 4K is smaller than the 158 FPS spread at 1080p. This compression indicates that at 4K, the GPU is working closer to its limit and settings changes have less relative impact because the rendering load is already heavy.

The 12 GB VRAM capacity is relevant for 4K gaming. Greedfall at 4K with Ultra settings produces 55 FPS, which suggests the memory allocation is sufficient for the game's demands at this resolution. The 504.2 GB/s bandwidth provides the data throughput needed for high-resolution textures and geometry.

The GPU's TDP is 285 W, and the suggested power supply is 600 W. The card uses a dual-slot design with a single 16-pin power connector. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. Display outputs include one HDMI 2.1 and three DisplayPort 1.4a connectors.

The PassMark G3D score of 31624 and the Geekbench OpenCL score of 176953 provide broader context for the GPU's compute capabilities. The 3DMark Steel Nomad DX12 score is 5024, which is a more game-relevant measurement. The Geekbench Vulkan score of 213808 indicates strong API-level performance.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600G and the NVIDIA GeForce RTX 4070 Ti ranks 523rd out of 3703 tested combos in Greedfall. This places it in the 85.9th percentile of all combinations in the database. The rank reflects the measured performance across all resolutions and settings, not just a single configuration.

A rank of 523 out of 3703 means the combo outperforms approximately 3179 other tested pairings. The top 522 combos achieve higher average frame rates in this game. Given that the RTX 4070 Ti alone sits in the 84th percentile among GPUs, the combo's overall rank of 85.9th percentile suggests the CPU is not dragging down the result significantly. If the processor were a severe bottleneck, the combo rank would likely fall below the GPU's individual percentile.

The CPU's percentile of 74 among all processors is lower than the GPU's percentile of 84. This gap of 10 percentage points indicates the processor is the weaker link in this pairing for general computing benchmarks. However, the measured Greedfall results show that at 1080p and 1440p, the frame rates are high enough that the CPU is still delivering adequate performance for this specific workload. The 4K results are more GPU-bound, as evidenced by the smaller frame rate differences between settings.

The combo rank of 523 also implies that many combinations with faster CPUs achieve better results in Greedfall, likely because the game can benefit from higher single-thread performance or additional cores in certain scenes. The 5600G's 6 cores and 12 threads are adequate, but combos with 8-core or 16-core processors may have an advantage in CPU-intensive areas of the game.

Measured FPS Breakdown

At 1920x1080, the measured average frame rates are as follows: Low settings produce 291 FPS, Medium settings produce 229 FPS with a minimum of 194 FPS and a maximum of 263 FPS, High settings produce 208 FPS, and Ultra settings produce 133 FPS. The difference between Low and Ultra at 1080p is 158 FPS, which is a 118.8% advantage for Low settings.

At 2560x1440, the results are: Low settings produce 202 FPS, Medium settings produce 159 FPS with a minimum of 135 FPS and a maximum of 182 FPS, High settings produce 144 FPS, and Ultra settings produce 92 FPS. The difference between Low and Ultra at 1440p is 110 FPS, which is a 119.6% advantage for Low settings.

At 3840x2160, the results are: Low settings produce 120 FPS, Medium settings produce 95 FPS with a minimum of 80 FPS and a maximum of 109 FPS, High settings produce 86 FPS, and Ultra settings produce 55 FPS. The difference between Low and Ultra at 4K is 65 FPS, which is a 118.2% advantage for Low settings.

The Medium settings tier is the only one with recorded minimum and maximum values at every resolution. At 1080p Medium, the minimum of 194 FPS and maximum of 263 FPS show a spread of 69 FPS. At 1440p Medium, the spread is 47 FPS. At 4K Medium, the spread narrows to 29 FPS. This tightening spread at higher resolutions is consistent with the GPU becoming the dominant performance limiter, as frame time variance decreases when the GPU is consistently busy.

The ratio between settings tiers remains stable across resolutions. At 1080p, Ultra is 45.7% of Low's frame rate. At 1440p, Ultra is 45.5% of Low's frame rate. At 4K, Ultra is 45.8% of Low's frame rate. This consistency indicates that Greedfall's settings scaling is largely resolution-independent for this hardware combination.

FAQ

Q: What is the highest measured average FPS for this combo in Greedfall?

A: The highest recorded average is 291 FPS at 1920x1080 with Low settings.

Q: Does this combo maintain 60 FPS at 4K with Ultra settings?

A: No, the measured average at 3840x2160 with Ultra settings is 55 FPS, which is below the 60 FPS threshold.

Q: How does the CPU compare to its nearest rivals in the database?

A: The Ryzen 5 5600G has an average benchmark score of 21088, which is 0.1% higher than the Intel Core i3-1220P, 0.1% lower than the Intel Core Ultra 7 256V, 0.2% lower than the AMD Ryzen 5 7530U, and 0.4% lower than the Intel Core Ultra 7 155U.

Q: What is the GPU's percentile ranking among all tested graphics cards?

A: The RTX 4070 Ti is in the 84th percentile of all GPUs in the database.

Q: What is the combo's overall rank in Greedfall?

A: The combo ranks 523rd out of 3703 tested combinations in this game.

Q: How much faster is Low settings compared to Ultra settings at 1440p?

A: At 2560x1440, Low settings produce 202 FPS while Ultra settings produce 92 FPS, making Low 119.6% faster.

Hardware Specifications

AMD Ryzen 5 5600G

Cores / Threads 6 / 12
Base Clock 3900 MHz
Boost Clock 4400 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4070 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 2610 MHz MHz
TDP 285 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600G + NVIDIA GeForce RTX 4070 Ti in Greedfall

Resolution Settings Avg FPS
3840x2160 Low 120.0
3840x2160 Medium 95.0
3840x2160 High 86.0
3840x2160 Ultra 55.0
2560x1440 Low 202.0
2560x1440 Medium 159.0
2560x1440 High 144.0
2560x1440 Ultra 92.0
1920x1080 Low 291.0
1920x1080 Medium 229.0
1920x1080 High 208.0
1920x1080 Ultra 133.0

Greedfall with Ryzen 5 5600G + Other GPUs

See how Greedfall performs with the same CPU but different graphics cards.

Greedfall with RTX 4070 Ti + Other CPUs

See how Greedfall performs with the same GPU but different processors.

Other Games with Ryzen 5 5600G + RTX 4070 Ti

Explore FPS benchmarks for other games using this same hardware combination.