Fortnite
This combination delivers exceptional performance with an average of 170 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 74 | 97 | 131 |
| 1440p QHD | 89 | 134 | 179 | 253 |
| 1080p Full HD | 144 | 215 | 280 | 399 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fortnite with Intel Core i5-13400F + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis
The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 4070 Ti delivers a broad performance envelope in Fortnite, scaling from highly competitive high-refresh-rate play at 1080p to playable but demanding 4K experiences. The measured data shows a clear pattern: the RTX 4070 Ti’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth provide ample headroom, while the i5-13400F’s 10 cores and 16 threads ensure the CPU is not the primary constraint until frame rates climb past the 300 FPS mark at lower resolutions. Across twelve measured configurations, the combination averages between 45.4 FPS at 4K Ultra and 398.9 FPS at 1080p Low, indicating that the limiting component shifts from the GPU at higher resolutions to the CPU only at the extreme low-setting end.
Resolution Scaling
The frame rate data reveals a predictable but steep scaling curve as resolution increases. At 1080p Low, the combo achieves 398.9 FPS, which drops by 36.6% to 252.9 FPS at 1440p, and then by another 48.2% to 130.9 FPS at 4K. This pattern indicates that at 1080p Low, the CPU is nearing its ceiling, as the i5-13400F’s 16 threads must feed frames faster than most displays can show. Moving to 1080p Medium (279.9 FPS) and 1080p High (215.3 FPS) still keeps the system firmly in GPU-limited territory, with the RTX 4070 Ti’s 40.09 TFLOPS FP32 throughput absorbing the increased shading load.
At 1440p, the scaling is more moderate. The gap between Low (252.9 FPS) and Medium (178.7 FPS) is 41.5%, while High (134.4 FPS) sits 24.8% below Medium. This suggests that the GPU is becoming the bottleneck, as the pixel count increases by 78% from 1080p to 1440p, and the Ada Lovelace architecture’s 240 TMUs and 80 ROPs handle the geometry and rasterization workload. The 4K results amplify this trend: 4K Low (130.9 FPS) is 48.2% slower than 1440p Low, and 4K High (73.9 FPS) is 45% slower than 1440p High. The most extreme drop occurs between 4K Medium (96.7 FPS) and 4K Ultra (45.4 FPS), a 53% reduction, highlighting how the Ultra preset’s additional effects tax the GPU’s 208.8 GPixel/s pixel rate.
The data shows that the RTX 4070 Ti is the limiting component for most of the tested configurations. The only exception is 1080p Low, where the CPU’s single-thread performance (3,634 in Passmark) and 16 threads allow it to push beyond 390 FPS, but the GPU still manages to keep up. Overall, resolution scaling from 1080p to 4K costs roughly 65-70% of the frame rate across all settings, which is consistent with a GPU-bound scenario where the 12 GB VRAM capacity is sufficient even at Ultra settings.
FAQ
Q: What is the highest average frame rate this combo achieves in Fortnite?
A: The highest measured average is 398.9 FPS at 1920x1080 with Low settings. This is the only configuration that exceeds 300 FPS, indicating that the CPU can drive very high frame rates when the GPU load is minimal.
Q: Is the RTX 4070 Ti sufficient for 4K gaming in Fortnite?
A: Yes, but with caveats. At 4K High, the combo averages 73.9 FPS, which is playable. At 4K Ultra, it drops to 45.4 FPS, which is below the 60 FPS threshold for smooth competitive play. The 12 GB VRAM is not a limiting factor, as even 4K Ultra does not exceed it.
Q: How much performance is lost moving from 1440p to 4K at High settings?
A: The average frame rate drops from 134.4 FPS at 2560x1440 to 73.9 FPS at 3840x2160, a 45% reduction. This indicates that the GPU is the primary constraint, as the CPU has ample headroom at both resolutions.
Q: Does the i5-13400F bottleneck the RTX 4070 Ti in Fortnite?
A: Only at 1080p Low, where the combo reaches 398.9 FPS. At 1080p Medium (279.9 FPS) and above, the GPU becomes the bottleneck. The CPU’s 3DMark max threads score of 7,307 suggests it can handle high frame rates, but the GPU limits output in most scenarios.
Q: What is the frame rate difference between Low and Ultra at 1440p?
A: Low settings yield 252.9 FPS, while Ultra yields 88.7 FPS, a 64.9% reduction. This large gap reflects the GPU’s workload scaling, as Ultra settings increase shading and post-processing demands.
Q: How does this combo rank among all tested combinations?
A: It ranks 187th out of 1,564 combos in Fortnite, placing it in the top 12% of all tested configurations. This is consistent with a high-end CPU and GPU pairing.
GPU Role
The NVIDIA GeForce RTX 4070 Ti plays a dominant role in shaping Fortnite’s frame rates across most settings. Its 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth, which is more than sufficient for Fortnite’s texture and geometry loads, even at 4K Ultra. The GPU’s boost clock of 2610 MHz and 7,680 shading units allow it to sustain high throughput, as evidenced by the 3DMark Steel Nomad score of 5,024 and the Passmark G3D score of 31,624.
The GPU’s 60 RT cores and 240 tensor cores are not heavily utilized in Fortnite’s standard rendering path, but the Ada Lovelace architecture’s efficiency ensures that rasterization performance remains strong. The measured data shows that the GPU is the limiting factor for all settings above 1080p Low. For example, at 1440p High, the combo hits 134.4 FPS, while at 1440p Ultra, it drops to 88.7 FPS, a 34% reduction that aligns with the increased shading and shadow complexity. At 4K, the GPU’s workload becomes even more demanding, with the pixel rate of 208.8 GPixel/s struggling to maintain high frame rates at Ultra settings, where the average falls to 45.4 FPS.
The VRAM capacity is not a concern in any tested scenario. The 12 GB buffer is more than enough for Fortnite’s maximum settings, and the memory bandwidth of 504.2 GB/s prevents any bandwidth-related stuttering, even at 4K. The GPU’s 285 W TDP and 600 W suggested PSU indicate that this is a power-hungry component, but the performance data shows that it delivers consistent results across all resolutions. In summary, the RTX 4070 Ti is the primary driver of performance in this combo, with the CPU only becoming relevant at extremely high frame rates.
Settings Recommendations
Based on the measured FPS rows, the best settings depend on the target refresh rate and resolution. For 1080p users with a 144 Hz monitor, High settings (215.3 FPS) provide a smooth experience with ample headroom, while Medium (279.9 FPS) is optimal for 240 Hz displays. Low settings (398.9 FPS) are unnecessary for most displays and sacrifice visual quality for frame rates that exceed what most monitors can show.
At 1440p, High settings (134.4 FPS) are ideal for 120-144 Hz monitors, offering a good balance between visual fidelity and performance. Medium (178.7 FPS) suits 165 Hz displays, while Low (252.9 FPS) is overkill for most users. Ultra (88.7 FPS) is playable but drops below the 100 FPS threshold that competitive players often prefer. For 4K, High settings (73.9 FPS) are the most reasonable choice, as they stay above 60 FPS. Medium (96.7 FPS) is even better for 60 Hz displays, but Low (130.9 FPS) sacrifices too much visual quality. Ultra (45.4 FPS) is not recommended for competitive play, as the frame rate falls below 50 FPS.
Overall, the data suggests that High settings provide the best experience across all resolutions, as they maintain frame rates above 70 FPS at 4K and above 130 FPS at 1440p. Medium settings are a viable alternative for higher refresh rate monitors, but the visual improvement from High to Ultra is not worth the 35-50% frame rate penalty.
How This Combo Ranks
The Intel Core i5-13400F and NVIDIA GeForce RTX 4070 Ti combination ranks 187th out of 1,564 tested combos in Fortnite, placing it in the top 12% of all configurations. This high ranking reflects the strength of both components: the CPU’s 82nd percentile versus all CPUs and the GPU’s 85th percentile versus all GPUs. The CPU’s nearest rivals, such as the Intel Core i7-13620H (0.1% slower) and AMD Ryzen 5 5600X3D (0.5% faster), show that the i5-13400F is competitive with other mid-range processors. The GPU’s nearest rivals, including the NVIDIA GeForce RTX 5090 Mobile (0.6% faster) and Intel Arc A730M (1.5% faster), indicate that the RTX 4070 Ti is a strong performer, though not at the very top of the stack.
The combo’s rank of 187 suggests that while the RTX 4070 Ti is a high-end GPU, there are faster combinations available, likely with higher-tier CPUs or GPUs. However, the measured FPS data shows that this combo delivers excellent results in Fortnite, with 1080p High exceeding 200 FPS and 1440p High exceeding 130 FPS. The rank is consistent with the hardware’s specifications: the CPU’s 10 cores and 16 threads provide solid multi-threaded performance (Cinebench R23 multi-core score of 21,279), and the GPU’s 40.09 TFLOPS FP32 throughput is substantial. For users seeking high-refresh-rate Fortnite play at 1080p or 1440p, this combination is well above average, ranking ahead of the vast majority of tested systems.
Measured FPS Breakdown
The following table summarizes all twelve measured configurations, showing the exact average frame rates for each resolution and settings preset.
At 1920x1080, the combo achieves its highest frame rates. Low settings produce 398.9 FPS, Medium produces 279.9 FPS, High produces 215.3 FPS, and Ultra produces 143.7 FPS. The gap between Low and Ultra is 255.2 FPS, or 64% of the Low result. This resolution is ideal for high-refresh-rate monitors, with even Ultra exceeding 140 FPS.
At 2560x1440, frame rates remain strong but drop noticeably. Low settings yield 252.9 FPS, Medium yields 178.7 FPS, High yields 134.4 FPS, and Ultra yields 88.7 FPS. The gap between Low and Ultra is 164.2 FPS, or 65% of the Low result. High settings remain above 130 FPS, making this resolution suitable for 144 Hz displays.
At 3840x2160, the GPU is heavily stressed. Low settings average 130.9 FPS, Medium averages 96.7 FPS, High averages 73.9 FPS, and Ultra averages 45.4 FPS. The gap between Low and Ultra is 85.5 FPS, or 65% of the Low result. Only Low and Medium settings maintain frame rates above 60 FPS, while High hovers near 74 FPS and Ultra falls below 50 FPS.
The data shows a consistent pattern: moving from Low to Ultra settings reduces frame rates by approximately 64-65% at every resolution, indicating that the GPU’s workload scales linearly with the quality preset. The CPU’s influence is minimal, as the frame rate differences between resolutions are consistent with pixel count scaling.
Hardware Specifications
Intel Core i5-13400F
NVIDIA GeForce RTX 4070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-13400F + NVIDIA GeForce RTX 4070 Ti in Fortnite
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 130.9 |
| 3840x2160 | Medium | 96.7 |
| 3840x2160 | High | 73.9 |
| 3840x2160 | Ultra | 45.4 |
| 2560x1440 | Low | 252.9 |
| 2560x1440 | Medium | 178.7 |
| 2560x1440 | High | 134.4 |
| 2560x1440 | Ultra | 88.7 |
| 1920x1080 | Low | 398.9 |
| 1920x1080 | Medium | 279.9 |
| 1920x1080 | High | 215.3 |
| 1920x1080 | Ultra | 143.7 |
Fortnite with ii5-13400F + Other GPUs
See how Fortnite performs with the same CPU but different graphics cards.
Fortnite with RTX 4070 Ti + Other CPUs
See how Fortnite performs with the same GPU but different processors.
Other Games with ii5-13400F + RTX 4070 Ti
Explore FPS benchmarks for other games using this same hardware combination.