Fortnite

Fortnite

AVERAGE FPS
89
good

This combination provides smooth gameplay with an average of 89 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 41 47 67
1440p QHD 48 75 90 129
1080p Full HD 75 114 145 208

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 67
3840x2160 Medium 47
3840x2160 High 41
3840x2160 Ultra 27
2560x1440 Low 129
2560x1440 Medium 90
2560x1440 High 75
2560x1440 Ultra 48
1920x1080 Low 208
1920x1080 Medium 145
1920x1080 High 114
1920x1080 Ultra 75

Fortnite with Intel Core i3-12100F + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

The Intel Core i3-12100F and NVIDIA GeForce RTX 3060 Ti pairing produces a wide spread of frame rates in Fortnite, ranging from 26.6 FPS at 4K Ultra to 207.5 FPS at 1080p Low. This 1080p Low result is particularly notable, as it approaches the refresh rate ceiling of high-end monitors, demonstrating the combo's capability when settings are tuned for competitive play. The data suggests a system that is well-balanced at lower resolutions but becomes GPU-limited as pixel count and visual fidelity increase, making resolution and settings selection the primary lever for performance tuning.

Resolution Scaling

The measured FPS data shows a clear and consistent pattern of performance degradation as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 113.5 FPS at 1080p to 75.1 FPS at 1440p, a 34% reduction, and then further to 41 FPS at 4K, which represents an additional 45% drop. This steep decline across each resolution step points to the GPU becoming the dominant limiting factor, as the pixel throughput demands of Fortnite scale directly with resolution.

At Low settings, the scaling behavior reveals more about the system's headroom. The 1080p Low result of 207.5 FPS is extraordinarily high, but this drops to 128.6 FPS at 1440p and 66.5 FPS at 4K. The transition from 1080p to 1440p at Low settings shows a 38% reduction, which is significant but less severe than the 45% drop seen when moving from 1440p to 4K. This pattern indicates that even at Low settings, the RTX 3060 Ti's rendering pipeline is increasingly burdened by the sheer number of pixels at higher resolutions, rather than the CPU becoming a bottleneck.

The data implies that the i3-12100F is capable of feeding the GPU efficiently at 1080p, as evidenced by the 207.5 FPS Low result. However, at 4K, even the Low preset yields only 66.5 FPS, which is below the 75.1 FPS seen at 1440p High. This suggests that resolution scaling is not linear, and the GPU's memory bandwidth and compute resources are being saturated at 4K regardless of the quality preset, making the RTX 3060 Ti the clear bottleneck at that resolution.

GPU Role

The RTX 3060 Ti's specifications align well with the measured Fortnite performance. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth, which is sufficient for Fortnite's texture-heavy environments at 1080p and 1440p. The base clock of 1410 MHz and boost clock of 1665 MHz, combined with 4864 shading units, deliver the raw compute power needed for the frame rates observed. The GPU's 80 ROPs and 152 TMUs are also consistent with the pixel and texture rates of 133.2 GPixel/s and 253.1 GTexel/s, respectively.

The 4K Ultra result of 26.6 FPS is particularly telling. This figure is far below playable thresholds, and it indicates that the 8 GB VRAM capacity might be a limiting factor at this resolution with maximum settings, as Fortnite's Ultra preset can exceed this allocation. The 4K Medium result of 46.8 FPS and 4K High of 41 FPS further confirm that the GPU's memory subsystem and compute capacity are strained at 4K. The GPU's percentile rank of 69 among all GPUs suggests it is a mid-to-upper tier part, but the data shows it is not designed for 4K gaming in demanding titles like Fortnite.

Interestingly, the GPU's nearest rivals in benchmark scores include the AMD Radeon RX 6600, which scores 25235 with a delta of -0.5% relative to the RTX 3060 Ti's average score of 25120. This close performance parity in synthetic benchmarks does not translate to identical gaming experiences, as the Fortnite data shows the RTX 3060 Ti struggling to maintain 60 FPS at 4K Medium. The 16.20 TFLOPS FP32 performance is substantial, but it is not enough to overcome the memory bandwidth and capacity limitations at higher resolutions.

How This Combo Ranks

The combination of the i3-12100F and RTX 3060 Ti achieves a combo rank of 1098 out of 1564 tested combinations in Fortnite. This places the pair in the 70th percentile of all tested combos, which is respectable but not exceptional. The ranking suggests that while this system can deliver high frame rates at 1080p, there are many other combinations that perform better, likely due to more powerful CPUs or GPUs that can handle higher resolutions more effectively.

The CPU's percentile rank of 72 among all CPUs, with an average benchmark score of 13516, is slightly higher than the combo rank. This indicates that the processor is relatively stronger in isolation than the overall system performance would suggest. The CPU's nearest rival, the AMD Ryzen Threadripper PRO 3975WX, scores 13534 with a delta of -0.1%, showing that the i3-12100F performs comparably to a high-end workstation processor in synthetic benchmarks, despite having only 4 cores and 8 threads.

The GPU's percentile rank of 69, with an average benchmark score of 25120, is lower than the CPU's percentile, indicating that the graphics card is the weaker link in this pairing. The GPU's nearest rival, the AMD Radeon RX 6700M, scores 25180 with a delta of -0.2%, showing that the RTX 3060 Ti is competitive with laptop GPUs in synthetic tests. However, in Fortnite, the combo rank of 1098 out of 1564 suggests that the pairing is not optimized for this specific game, as many other combinations achieve better frame rates, particularly at higher resolutions.

FAQ

Q: What is the best resolution for this combo in Fortnite?

A: The data shows 1920x1080 is the optimal resolution, with the Low preset achieving 207.5 FPS and High achieving 113.5 FPS. At 2560x1440, the best result is 128.6 FPS on Low, which is still playable, but 3840x2160 results in significantly lower frame rates across all settings.

Q: Can this system handle Fortnite at 4K?

A: The measured data indicates 4K is not viable for smooth gameplay. The best 4K result is 66.5 FPS on Low settings, but Medium drops to 46.8 FPS and High to 41 FPS, while Ultra falls to 26.6 FPS. These results are below typical competitive thresholds.

Q: How does the CPU compare to its nearest rival in multi-threaded performance?

A: The i3-12100F scores 11912 in Cinebench R23 multi-core, while its nearest rival, the Intel Core i7-7700K, has an average benchmark score of 13280 with a delta of 1.8% higher. This shows the i3-12100F is slightly behind a much older high-end CPU in multi-threaded tasks.

Q: What is the GPU's memory bandwidth and how does it affect performance?

A: The RTX 3060 Ti has 448.0 GB/s of bandwidth from its 8 GB GDDR6 memory on a 256-bit bus. This bandwidth is adequate for 1080p and 1440p, but the 4K Ultra result of 26.6 FPS suggests that memory capacity and bandwidth are insufficient for maximum settings at that resolution.

Q: Is the i3-12100F a bottleneck at 1080p?

A: The 1080p Low result of 207.5 FPS indicates the CPU is not a bottleneck at lower settings, as the frame rate is exceptionally high. However, the 1080p Ultra result of 75.3 FPS shows that the GPU becomes the limiting factor when settings are increased, as the CPU still has headroom.

Q: How does this combo compare to other tested combinations?

A: The combo ranks 1098 out of 1564 tested combinations, placing it in the 70th percentile. This suggests that while it performs well, there are many other pairings that achieve higher frame rates in Fortnite, likely due to more powerful GPUs.

Measured FPS Breakdown

At 1920x1080, the system delivers a wide range of performance depending on settings. The Low preset achieves 207.5 FPS, which is the highest measured result across all resolutions and settings. Medium yields 144.7 FPS, High drops to 113.5 FPS, and Ultra falls to 75.3 FPS. This represents a 63.7% reduction from Low to Ultra, indicating that the GPU is heavily impacted by the quality preset at this resolution.

At 2560x1440, the performance scales down proportionally. Low produces 128.6 FPS, Medium 90.4 FPS, High 75.1 FPS, and Ultra 48.3 FPS. The difference between Low and Ultra is 62.4%, which is slightly less than at 1080p, suggesting that the GPU is becoming more consistently loaded across settings. The 1440p High result of 75.1 FPS is nearly identical to the 1080p Ultra result of 75.3 FPS, showing that resolution and settings have a similar impact on the GPU.

At 3840x2160, the performance drops significantly across all settings. Low achieves 66.5 FPS, Medium 46.8 FPS, High 41 FPS, and Ultra 26.6 FPS. The gap between Low and Ultra is 60%, which is the smallest relative difference among all resolutions, indicating that the GPU is saturated at this resolution regardless of settings. The 4K Low result of 66.5 FPS is lower than the 1440p Low result of 128.6 FPS, demonstrating the substantial cost of rendering four times the pixels.

CPU Role

The Intel Core i3-12100F is a 4-core, 8-thread processor with a base clock of 3.30 GHz and a boost clock of 4.30 GHz. Its 12 MB of shared L3 cache and support for both DDR4 and DDR5 memory make it a flexible budget option. The CPU's single-thread performance is strong, as evidenced by its Cinebench R23 single-core score of 1681 and Geekbench single-core score of 2224, which are crucial for Fortnite's physics and game logic.

The data shows that the CPU is not the primary bottleneck in this system. At 1080p Low, the 207.5 FPS result indicates that the CPU can process game frames at a very high rate. The CPU's 3DMark 8-thread score of 4026 and max-thread score of 4023 show that its multi-threaded performance is consistent, but the 4-core design means it may struggle with heavily threaded workloads. However, Fortnite is not a highly multi-threaded game, so the i3-12100F's strong single-thread performance is more relevant.

The CPU's average benchmark score of 13516 places it at the 72nd percentile, and its nearest rival, the Intel Core i7-7700K, scores 13280 with a delta of 1.8% higher. This close parity in synthetic benchmarks does not reflect gaming performance, as the i3-12100F's newer architecture and higher boost clock give it an advantage in latency-sensitive tasks. The CPU's TDP of 58 W is modest, allowing for efficient cooling solutions, which is beneficial for maintaining sustained performance in long gaming sessions.

Settings Recommendations

For competitive play, the 1080p Low preset is the clear choice, offering 207.5 FPS. This setting maximizes frame rate and minimizes input latency, which is critical in a fast-paced Battle Royale game. The 1440p Low result of 128.6 FPS is also viable for players with higher-resolution monitors who prioritize smoothness over visual quality.

For a balance of visual fidelity and performance, the 1080p Medium preset at 144.7 FPS is recommended. This provides a significant boost in visual quality over Low while maintaining frame rates above 144 FPS, which is ideal for high-refresh-rate displays. The 1440p Medium result of 90.4 FPS is also playable, though it falls short of the 100 FPS threshold that many players prefer.

For players who prioritize visual quality over raw frame rate, the 1080p High preset at 113.5 FPS is the best option. This setting delivers a substantial improvement in textures and effects while still maintaining frame rates above 100 FPS. The 1440p High result of 75.1 FPS is sufficient for casual play, but the 4K High result of 41 FPS is not recommended, as it falls below the 60 FPS threshold for smooth gameplay. The Ultra preset should be avoided at all resolutions, as even at 1080p it only achieves 75.3 FPS, and at 4K it drops to 26.6 FPS, which is unplayable.

Hardware Specifications

Intel Core i3-12100F

Cores / Threads 4 / 8
Base Clock 3300 MHz
Boost Clock 4300 MHz
TDP 58W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 3060 Ti in Fortnite

Resolution Settings Avg FPS
3840x2160 Low 66.5
3840x2160 Medium 46.8
3840x2160 High 41.0
3840x2160 Ultra 26.6
2560x1440 Low 128.6
2560x1440 Medium 90.4
2560x1440 High 75.1
2560x1440 Ultra 48.3
1920x1080 Low 207.5
1920x1080 Medium 144.7
1920x1080 High 113.5
1920x1080 Ultra 75.3

Fortnite with ii3-12100F + Other GPUs

See how Fortnite performs with the same CPU but different graphics cards.

Fortnite with RTX 3060 Ti + Other CPUs

See how Fortnite performs with the same GPU but different processors.

Other Games with ii3-12100F + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.