Fortnite
This combination delivers exceptional performance with an average of 225 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 65 | 97 | 124 | 177 |
| 1440p QHD | 120 | 183 | 236 | 333 |
| 1080p Full HD | 191 | 288 | 370 | 514 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fortnite with AMD Ryzen 9 8945HX + NVIDIA GeForce RTX 5090, In-Depth Analysis
The AMD Ryzen 9 8945HX paired with the NVIDIA GeForce RTX 5090 produces a Fortnite performance profile that is heavily dictated by the graphics card, but with surprising CPU limitations at lower resolutions. Benchmark results show this combo ranks 526th out of 2,740 tested combinations, placing it in the top 19% of all systems. The data reveals a system capable of high refresh rate gaming at 1440p, but one that struggles to maintain playable frame rates at 4K Ultra settings.
Resolution Scaling
The measured FPS data shows a dramatic scaling curve from 1080p to 4K, with the GPU becoming the primary bottleneck at higher resolutions. At Low settings, the average frame rate drops from 355 FPS at 1920x1080 to 226 FPS at 2560x1440, a 36% reduction, and then further to 119 FPS at 3840x2160, representing a 47% drop from 1440p. This scaling pattern indicates that while the RTX 5090 has substantial headroom at 1080p, the 4K resolution demands significantly more pixel throughput, cutting performance by roughly two-thirds from the 1080p baseline.
The High settings scaling tells a similar story but with less absolute headroom. At 1080p High, the system achieves 194 FPS, which falls to 123 FPS at 1440p (a 37% reduction) and then to 65 FPS at 4K (a 47% reduction from 1440p). The consistency of these percentage drops across settings suggests that the resolution scaling factor is largely independent of the graphics preset, pointing to a uniform GPU-bound behavior as pixel count increases.
Medium settings exhibit the most complete dataset, with minimum and maximum frame rates recorded at each resolution. At 1080p Medium, the average is 250 FPS with a range of 213 to 288 FPS. Moving to 1440p Medium drops the average to 159 FPS (36% lower) with a 135 to 183 FPS range. At 4K Medium, the average falls to 84 FPS with a 71 to 97 FPS range, again showing a 47% reduction from 1440p. The narrowing of the frame rate range at 4K, from a 75 FPS spread at 1080p to a 26 FPS spread at 4K, indicates that the GPU is becoming the limiting factor, reducing the variability seen at lower resolutions where CPU or memory performance can cause larger fluctuations.
Ultra settings produce the steepest scaling curve, with 128 FPS at 1080p, 81 FPS at 1440p, and 43 FPS at 4K. The 47% drop from 1440p to 4K at Ultra settings mirrors the pattern seen at other presets, suggesting that the relative cost of 4K resolution remains constant regardless of visual complexity. However, the absolute frame rates at 4K Ultra are below the 60 FPS threshold typically considered minimum for smooth gameplay, indicating that this combination requires settings adjustments for 4K play.
The data shows that the RTX 5090's capability is best utilized at 1440p, where it delivers between 81 and 226 FPS depending on settings. At 1080p, the frame rates exceed 355 FPS at Low settings, which is beyond the refresh rate of most monitors, suggesting that the CPU becomes a more significant factor at this resolution.
CPU Role
The AMD Ryzen 9 8945HX brings 16 cores and 32 threads based on the Zen 4 architecture, operating at a base clock of 2.50 GHz with a boost clock of 5.40 GHz. This mobile processor is built on a 5 nm process by TSMC with 13,140 million transistors across a dual-die design totaling 2x 71 mm². The cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 64 MB of shared L3 cache, providing substantial data locality for game workloads.
In Fortnite, which is known to scale with core count but benefits more from single-thread performance, the Ryzen 9 8945HX's single-core capabilities are strong. The Cinebench R23 single-core score of 6,030 and multi-core score of 42,713 place this CPU in the 95th percentile of all processors tested. Its nearest rival, the Intel Core Ultra 9 285HX, scores nearly identically with a 0.1% delta, indicating that the two top mobile processors are effectively tied in overall benchmark performance. The AMD EPYC Embedded 8224P and AMD Ryzen Threadripper PRO 9945WX are 0.4% behind, while the AMD Ryzen 9 9950X3D is 0.6% ahead.
The 5.40 GHz boost clock is particularly relevant for Fortnite's frame generation at low resolutions. At 1080p Low settings, the system reaches 355 FPS, which is likely approaching the CPU's instruction throughput limit. The 2.50 GHz base clock ensures sustained performance under load, while the boost capability handles single-threaded game logic. The 55 W TDP rating indicates this is a high-performance mobile part, and the DDR5 memory support with 83.2 GB/s bandwidth provides sufficient memory throughput for the game's asset streaming.
The PassMark multithread score of 51,405 and single-thread score of 3,907 confirm that this CPU can feed even a flagship GPU at high frame rates. However, the data suggests that at 4K resolutions, the CPU's role diminishes, as frame rates drop to levels where the GPU's pixel processing becomes the dominant constraint. The L3 cache of 64 MB helps maintain high hit rates for game data, reducing the penalty of memory latency that can affect frame time consistency.
GPU Role
The NVIDIA GeForce RTX 5090 is built on the Blackwell 2.0 architecture with the GB202 chip, containing 92,200 million transistors on a 750 mm² die. The GPU operates at a base clock of 2017 MHz and boosts to 2407 MHz, with memory running at 1750 MHz for 28 Gbps effective speed. The 32 GB of GDDR7 memory across a 512-bit bus provides 1.79 TB/s of bandwidth, which is critical for high-resolution texture streaming in Fortnite.
The 21,760 shading units, 680 TMUs, and 176 ROPs deliver a theoretical FP32 performance of 104.8 TFLOPS. The 170 RT cores and 680 tensor cores provide hardware acceleration for ray tracing and DLSS features, though the measured data does not include these features enabled. The pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s indicate the raw throughput available for fill-rate-bound scenarios.
In the overall GPU benchmark rankings, the RTX 5090 sits in the 92nd percentile, with its nearest rival being the NVIDIA Tesla P100 PCIe 16 GB at a 0.3% delta. The Tesla P100 PCIe 12 GB is 0.6% ahead, while the AMD Radeon RX 6850M XT is 1.1% ahead, and the AMD Radeon Pro Vega 64X is 1.4% behind. This placement suggests that while the RTX 5090 is a top-tier consumer GPU, its benchmark scores are closely matched by workstation and previous-generation parts in synthetic tests.
For Fortnite specifically, the GPU's role becomes dominant at 4K resolution. The measured frame rates at 4K range from 43 FPS at Ultra to 119 FPS at Low, with the GPU's 32 GB VRAM having no apparent capacity limitations in this game. The 1.79 TB/s memory bandwidth ensures that texture streaming and draw calls do not cause stutters, as evidenced by the minimum frame rates at Medium settings being 71 FPS at 4K, 135 FPS at 1440p, and 213 FPS at 1080p.
The boost clock of 2407 MHz provides the sustained performance needed for competitive play, while the 575 W TDP rating means this GPU requires substantial power delivery. The PCIe 5.0 x16 interface provides ample bandwidth for CPU-GPU communication, though Fortnite's data transfer requirements are modest compared to other titles.
Measured FPS Breakdown
At 1920x1080, the system delivers average frame rates of 355 FPS at Low, 250 FPS at Medium, 194 FPS at High, and 128 FPS at Ultra settings. The Medium preset shows a minimum of 213 FPS and maximum of 288 FPS, indicating good frame time consistency. These numbers demonstrate that even at Ultra settings, the system exceeds 120 FPS, making 1080p competitive play viable at any preset.
Moving to 2560x1440, the averages are 226 FPS at Low, 159 FPS at Medium, 123 FPS at High, and 81 FPS at Ultra. The Medium preset range spans 135 to 183 FPS, which is a tighter band than at 1080p, suggesting reduced CPU-induced variance. At High settings, the 123 FPS average is sufficient for high refresh rate monitors, while Ultra at 81 FPS requires a 75 Hz or 80 Hz display to fully utilize.
At 3840x2160, the averages drop to 119 FPS at Low, 84 FPS at Medium, 65 FPS at High, and 43 FPS at Ultra. The Medium preset provides a 71 to 97 FPS range, which hovers around the 60 FPS playability threshold. High settings at 65 FPS are playable on a standard 60 Hz display, but the 43 FPS Ultra average falls below smooth gameplay standards, requiring settings reduction for 4K play.
The progression from Low to Ultra at each resolution shows consistent performance scaling. At 1080p, Ultra is 64% slower than Low; at 1440p, Ultra is 64% slower; and at 4K, Ultra is 64% slower. This uniform scaling indicates that each settings tier imposes a consistent rendering cost across resolutions, allowing predictable performance tuning.
The data shows that the RTX 5090's 32 GB VRAM is not a limiting factor at any resolution or setting combination, as even 4K Ultra textures and effects do not approach capacity limits. The GPU's compute and memory bandwidth are the primary determinants of frame rate, particularly at 4K where the 43 FPS Ultra result reflects the raw pixel throughput requirements.
How This Combo Ranks
This combination of AMD Ryzen 9 8945HX and NVIDIA GeForce RTX 5090 achieves a rank of 526 out of 2,740 tested configurations in Fortnite, placing it in the 80th percentile of all combos. This ranking reflects a system that is faster than the majority of tested setups but not at the very top, indicating that other combinations with different CPU-GPU pairings achieve higher frame rates in this specific game.
The CPU's 95th percentile ranking across all processors and the GPU's 92nd percentile ranking suggest that individually, both components are near the top of their respective categories. However, the combo's 526th rank out of 2,740 implies that Fortnite's performance scaling does not perfectly correlate with synthetic benchmark scores. The game's optimization favors certain architectures, and the data shows that this mobile CPU paired with a desktop-class GPU does not produce the absolute highest frame rates in Fortnite.
The delta between this combo's rank and the top performers indicates that either a stronger CPU or a different GPU configuration would yield better results. The RTX 5090's nearest rivals in GPU benchmarks are within 1.4%, but the actual Fortnite performance may diverge due to game-specific factors such as driver optimization and shader compilation efficiency.
The 526th rank suggests that there are 525 combinations that achieve higher frame rates in Fortnite, which may include systems with more powerful desktop CPUs or GPUs with higher clock speeds in game-specific workloads. The data does not provide individual combo scores, so the exact performance gap to the top cannot be quantified, but the ranking percentile places this system firmly in the upper echelon of tested hardware.
Settings Recommendations
Based on the measured FPS data, the optimal settings depend on the target resolution and refresh rate. For competitive play at 1080p, Low settings at 355 FPS provide the highest possible frame rate, which is ideal for high refresh rate monitors above 240 Hz. The Medium preset at 250 FPS offers a balance of visual quality and performance, with a 213 FPS minimum ensuring no drops below common 144 Hz refresh rates.
At 1440p, the Medium preset at 159 FPS is the recommended choice for high refresh rate gaming, as it keeps frame rates above 135 FPS. The High preset at 123 FPS is suitable for 120 Hz displays, while Low at 226 FPS exceeds the capabilities of most monitors. Ultra at 81 FPS is viable for 75 Hz displays but leaves little headroom for frame time spikes.
For 4K gaming, the Low preset at 119 FPS provides the smoothest experience, though it significantly reduces visual fidelity. The Medium preset at 84 FPS is the best compromise, offering improved visuals while maintaining frame rates above 71 FPS, which is playable on most displays. High at 65 FPS is acceptable for 60 Hz monitors but may exhibit occasional dips. Ultra at 43 FPS is not recommended for gameplay, as the low frame rate will impact responsiveness and the experience will feel sluggish.
The data shows that the Medium settings tier provides the most consistent performance across all resolutions, with the smallest relative performance penalty compared to Low while offering substantial visual improvements over Low. For users prioritizing frame rate consistency, Medium is the safest choice, with the measured minimums ensuring no severe drops during intense combat scenarios. The High preset offers a moderate visual upgrade at the cost of approximately 22% performance at each resolution, which may be acceptable for players with adaptive sync displays.
Hardware Specifications
AMD Ryzen 9 8945HX
NVIDIA GeForce RTX 5090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 8945HX + NVIDIA GeForce RTX 5090 in Fortnite
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Ultra | 65.0 |
| 3840x2160 | High | 97.0 |
| 3840x2160 | Medium | 124.0 |
| 3840x2160 | Low | 177.0 |
| 2560x1440 | Ultra | 120.0 |
| 2560x1440 | High | 183.0 |
| 2560x1440 | Medium | 236.0 |
| 2560x1440 | Low | 333.0 |
| 1920x1080 | Ultra | 191.0 |
| 1920x1080 | High | 288.0 |
| 1920x1080 | Medium | 370.0 |
| 1920x1080 | Low | 514.0 |
Fortnite with Ryzen 9 8945HX + Other GPUs
See how Fortnite performs with the same CPU but different graphics cards.
Fortnite with RTX 5090 + Other CPUs
See how Fortnite performs with the same GPU but different processors.
Other Games with Ryzen 9 8945HX + RTX 5090
Explore FPS benchmarks for other games using this same hardware combination.