Evolve

Evolve, the 2015 asymmetric FPS, presents an interesting stress profile for the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5060 Ti 8 GB pairing. The measured data shows a system that scales predictably with resolution and settings, but with distinct bottlenecks emerging at different points. The combination ranks 1096th out of 2872 tested configurations for this title, placing it in the upper half of all possible hardware pairings. This analysis breaks down the frame rate data to understand where the CPU and GPU each exert their influence.

Resolution Scaling

The frame rate scaling from 1080p to 4K clearly demonstrates the GPU becoming the primary limiting factor as pixel count increases. At High settings, the transition from 1920x1080 to 2560x1440 sees average FPS drop from 133 to 89, a reduction of 44 frames. Moving further to 3840x2160 High yields 51 FPS on average, representing a 62% decrease from the 1080p figure. This steep decline is typical of a system where the graphics card's rendering throughput is the constraining element at higher resolutions.

The scaling pattern at Low settings is even more telling. At 1080p Low, the system delivers 219 FPS, which drops to 147 FPS at 1440p and then to 84 FPS at 4K. The 135 FPS difference between 1080p and 4K Low indicates that even at the lowest graphical load, the GPU is working substantially harder at higher resolutions. This suggests the RTX 5060 Ti's 128-bit memory bus and 8 GB GDDR7 capacity are being taxed by the increased pixel throughput, even when texture and shading demands are minimal.

Medium settings provide the most complete data with minimum and maximum frame times recorded. At 1080p Medium, the average is 170 FPS with a range of 144 to 195 FPS. At 1440p Medium, the average drops to 114 FPS with a range of 97 to 131 FPS. At 4K Medium, the average falls to 65 FPS with a range of 55 to 74 FPS. The proportional scaling here—roughly 33% reduction from 1080p to 1440p and another 43% from 1440p to 4K—shows a consistent GPU-bound behavior.

Ultra settings reveal the most dramatic performance cliff. The system manages 92 FPS at 1080p Ultra, but this collapses to 62 FPS at 1440p Ultra and only 35 FPS at 4K Ultra. The 4K Ultra result is particularly notable as it falls below the 30 FPS threshold that many consider the minimum for playable frame rates, though it remains technically above it. The scaling from 1080p to 4K at Ultra represents a 62% performance reduction, nearly identical to the High settings scaling, indicating that the GPU's compute units are saturated regardless of the specific preset.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 Raphael architecture, running on the AM5 socket. Its base clock of 3.70 GHz and boost clock of 5.00 GHz provide substantial single-thread performance, as evidenced by the 3dmark single-thread score of 974 and the Cinebench R23 single-core result of 3218 points. These scores place the CPU in the 77th percentile against all processors, with an average benchmark score of 24964.

The processor's multi-threaded capabilities are strong for a 6-core part. The Cinebench R23 multicore score of 22799 and the Geekbench multicore result of 12362 show healthy scaling across its 12 threads. The 3dmark 16-thread score of 6376 and max-thread score of 6379 indicate that the CPU can handle substantial parallel workloads. For Evolve, which is primarily a GPU-bound title at higher settings, the CPU's role becomes more apparent at lower resolutions and settings where frame rates exceed 200 FPS.

At 1080p Low, the system achieves 219 FPS average. This high frame rate suggests the CPU is capable of feeding the GPU with enough draw calls and physics calculations to maintain fluid performance. The 3dmark 2-thread score of 1902 and 4-thread score of 3621 indicate strong performance in lightly-threaded scenarios, which is relevant for Evolve's main game loop. However, the lack of minimum frame rate data at Low settings means we cannot assess potential CPU-related frame pacing issues at these high frame rates.

The CPU's 32 MB of shared L3 cache and 1 MB L2 cache per core provide ample memory hierarchy for game data. The 65W TDP and 5nm TSMC process node contribute to efficient operation, though the measured data does not include power consumption figures. The Ryzen 5 7500F's closest rivals in overall benchmark scores are the Intel Core i7-11850H (0.1% ahead), the AMD Ryzen 5 8400F (0.2% behind), and the Intel Core i7-13620H (0.2% ahead), placing this CPU in a competitive mid-range position.

FAQ

Q: What is the highest average frame rate achieved in Evolve with this hardware?

A: The maximum measured average FPS is 219 at 1920x1080 with Low settings. This represents the ceiling for this combination in the tested configurations.

Q: Is the RTX 5060 Ti 8 GB able to maintain 60 FPS at 4K in Evolve?

A: At 4K Medium, the system averages 65 FPS, which is above the 60 FPS threshold. At 4K High, the average drops to 51 FPS, and at 4K Ultra it falls to 35 FPS. Only Medium settings at 4K reliably exceed 60 FPS.

Q: How does the CPU compare to its direct competitors in synthetic benchmarks?

A: The Ryzen 5 7500F has an average benchmark score of 24964. The Intel Core i7-11850H scores 24935 (0.1% higher), the AMD Ryzen 5 8400F scores 25005 (0.2% higher), and the Intel Core i7-13620H scores 24911 (0.2% lower). These differences are within 0.4% of each other.

Q: What is the frame rate impact of moving from High to Ultra settings at 1440p?

A: At 2560x1440, High settings yield 89 FPS average, while Ultra yields 62 FPS. This represents a 30% performance reduction for the higher preset.

Q: Does the GPU's 8 GB VRAM appear to be a limiting factor in Evolve?

A: The data does not include specific VRAM usage metrics. However, the consistent performance scaling across settings suggests that memory capacity is not causing sudden frame rate drops, as minimum FPS values track closely with average values in the available data.

Q: How does the system rank among all tested hardware combinations for Evolve?

A: This specific CPU/GPU pairing ranks 1096th out of 2872 tested combinations, placing it in the 62nd percentile of all configurations tested for this game.

Measured FPS Breakdown

At 1920x1080, the system demonstrates strong performance across all presets. Low settings deliver an average of 219 FPS, Medium provides 170 FPS with a range of 144 to 195 FPS, High reaches 133 FPS, and Ultra drops to 92 FPS. The scaling from Low to Ultra at 1080p shows a 58% reduction in frame rate, which is substantial but expected given the increased graphical complexity.

Moving to 2560x1440, the frame rates remain respectable. Low settings average 147 FPS, Medium averages 114 FPS with a range of 97 to 131 FPS, High delivers 89 FPS, and Ultra drops to 62 FPS. The Medium settings data shows a tighter frame time distribution compared to 1080p, with the range between minimum and maximum being 34 FPS at both resolutions. The 1440p results indicate that the system can handle high-refresh-rate gaming at this resolution with Medium or lower settings.

At 3840x2160, the GPU becomes the dominant bottleneck. Low settings average 84 FPS, Medium averages 65 FPS with a range of 55 to 74 FPS, High drops to 51 FPS, and Ultra falls to 35 FPS. The 4K Medium data shows a range of 19 FPS between minimum and maximum, suggesting relatively stable frame pacing. The progression from Low to Ultra at 4K shows a 58% performance reduction, mirroring the 1080p scaling.

The complete data set reveals that the system's sweet spot is 1080p with High settings, delivering 133 FPS average. For 1440p gaming, Medium settings at 114 FPS provides a balanced experience. At 4K, only Low or Medium settings provide playable frame rates above 60 FPS, with Medium at 65 FPS being the highest playable configuration.

GPU Role

The NVIDIA GeForce RTX 5060 Ti 8 GB is based on the Blackwell 2.0 architecture with the GB206 chip, manufactured on a 5nm process at TSMC. Its 4608 shading units, 144 texture mapping units, and 48 raster operations processors provide the core rendering throughput. The GPU operates at a base clock of 2407 MHz and boost clock of 2572 MHz, with memory running at 1750 MHz (28 Gbps effective) across a 128-bit bus.

The 8 GB of GDDR7 memory provides 448.0 GB/s of bandwidth. This memory configuration is likely a significant factor in the GPU's performance at higher resolutions. The 128-bit bus width limits memory throughput compared to wider implementations, which could explain the steep frame rate drops when moving from 1440p to 4K. The GPU's pixel rate is 123.5 GPixel/s and texture rate is 370.4 GTexel/s, providing adequate fill rates for a mid-range card.

In synthetic benchmarks, the RTX 5060 Ti achieves a 3dmark Steel Nomad DX12 score of 4019 and a Passmark G3D score of 21981. However, its overall benchmark average of 4901 places it in the 29th percentile against all GPUs. This relatively low percentile ranking is notable given the GPU's modern architecture and features. The nearest rivals in overall performance are the AMD FirePro W5130M (0.1% lower), NVIDIA GeForce GTS 450 (0.2% higher), and AMD Radeon R7 M265 (0.6% lower), though these comparisons are based on aggregate benchmark scores rather than Evolve-specific performance.

The GPU's DirectX 12 Ultimate support and 12_2 feature level are relevant for Evolve, which was released in 2015 and primarily uses DirectX 11 rendering paths. The Passmark DirectX 11 score of 220 and DirectX 12 score of 82 indicate that the GPU's performance in legacy APIs is adequate, though the DirectX 12 score is notably lower. The GPU's 36 ray tracing cores and 144 tensor cores provide modern features that Evolve does not utilize, meaning these resources remain idle during gameplay.

Settings Recommendations

Based on the measured frame rate data, the optimal settings depend heavily on the target resolution and desired refresh rate. For 1080p displays with 144Hz refresh rates, High settings at 133 FPS average provides the best balance of visual quality and performance. The system cannot maintain 144 FPS at High settings, but the 133 FPS average is close enough that most users would find it acceptable. For 165Hz or higher refresh rate displays at 1080p, Medium settings at 170 FPS ensures the frame rate stays above the refresh rate threshold.

At 1440p, Medium settings at 114 FPS average provides the smoothest experience for standard 60Hz and 120Hz displays. The 97 FPS minimum ensures that even demanding scenes stay above the 60 FPS threshold. For users prioritizing visual quality over frame rate, High settings at 89 FPS is still playable, but the minimum frame rate data is not available, making it harder to assess frame time consistency. Ultra settings at 62 FPS at 1440p is borderline, as the performance is close to the 60 FPS target but may dip below in intense combat sequences.

For 4K displays, the data strongly suggests Medium settings as the highest playable preset. The 65 FPS average and 55 FPS minimum at 4K Medium provide a reasonably smooth experience, though the minimum frame rate is close to the 60 FPS target. High settings at 51 FPS at 4K may be acceptable for slower-paced games, but Evolve's frantic hunting and combat sequences would likely benefit from the additional frame rate headroom of Medium settings. Low settings at 84 FPS at 4K provides the best frame rate, but the visual quality reduction may not be worth the performance gain for most players.

The measured data indicates that the RTX 5060 Ti 8 GB is best utilized at 1080p or 1440p resolutions. At 1080p, the GPU has enough headroom to run High settings comfortably. At 1440p, Medium settings provide the best experience. At 4K, the GPU is pushed to its limits, and only Medium or Low settings deliver acceptable frame rates. The 8 GB VRAM does not appear to cause texture thrashing issues in Evolve, as the frame rate scaling remains consistent across all tested presets.