Evolve

Evolve

AVERAGE FPS
105
good

This combination provides smooth gameplay with an average of 105 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 51 65 84
1440p QHD 62 89 114 147
1080p Full HD 92 133 170 219

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 84
3840x2160 Medium 65
3840x2160 High 51
3840x2160 Ultra 35
2560x1440 Low 147
2560x1440 Medium 114
2560x1440 High 89
2560x1440 Ultra 62
1920x1080 Low 219
1920x1080 Medium 170
1920x1080 High 133
1920x1080 Ultra 92

Evolve with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5060 Ti 8 GB, In-Depth Analysis

The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 5060 Ti 8 GB produces a distinct performance profile in Evolve, where the game’s engine demonstrates a heavy reliance on the graphics card across all settings, but with CPU limitations surfacing at lower resolutions. The measured data provides a clear picture of how this combination handles the 2015 FPS title, with average frame rates ranging from 35 FPS at 4K Ultra to 219 FPS at 1080p Low. This analysis breaks down the scaling behavior, component roles, and practical settings for this specific hardware pairing.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all quality presets, indicating that the RTX 5060 Ti is the primary performance limiter in Evolve. At High settings, the average FPS falls from 133 at 1920x1080 to 89 at 2560x1440, then further to 51 at 3840x2160. This represents a 33% reduction moving from 1080p to 1440p, and a 62% reduction from 1080p to 4K. The pattern is similar for Low settings, which drop from 219 FPS at 1080p to 147 FPS at 1440p and finally 84 FPS at 4K—a 33% and 62% decrease respectively. Such proportional scaling suggests the GPU’s rasterization throughput, rather than memory bandwidth or CPU throughput, is the binding constraint.

The Medium preset shows the same trend with average FPS of 170, 114, and 65 across 1080p, 1440p, and 4K. The gap between 1440p and 4K is particularly pronounced, with the 4K result falling to 38% of the 1440p figure. Ultra settings exhibit the most severe drop, going from 92 FPS at 1080p to 62 FPS at 1440p and 35 FPS at 4K. The 4K Ultra result of 35 FPS is barely playable, while the 1080p Ultra result of 92 FPS remains smooth. This scaling behavior strongly indicates that the game’s pixel-shading workload grows almost linearly with resolution, and the RTX 5060 Ti’s 8 GB VRAM buffer does not appear to introduce any sudden cliff at 4K—the decline is gradual and consistent.

At 1080p, the difference between Low and Ultra is 127 FPS (219 vs 92), while at 4K the same settings span only 49 FPS (84 vs 35). This narrowing delta at higher resolutions further confirms that the GPU becomes the sole bottleneck as pixel count rises, whereas at 1080p the CPU can still feed frames fast enough to expose the graphics card’s limits. For users targeting high refresh rates, 1080p Low delivers over 200 FPS, but pushing to 1440p High still yields 89 FPS, which remains fluid for most displays.

CPU Role

The Ryzen 5 3600 brings six cores and twelve threads based on the Zen 2 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. In Evolve, a title from 2015, the CPU’s role is most evident at 1080p Low, where the average FPS reaches 219. This figure is disproportionately higher than the 147 FPS at 1440p Low, suggesting that at 1080p the CPU can still push frames beyond what the GPU can render, but the gap narrows quickly as resolution increases. The 12-thread configuration ensures that the game’s multi-threaded rendering tasks, such as physics and AI for monster and hunter characters, are unlikely to starve the GPU at lower resolutions.

Benchmark data for the CPU shows a single-thread score of 696 in 3DMark and a multi-thread score of 4605 in the 16-thread test. The single-thread performance is critical for Evolve’s main game loop, and the 3.60 GHz base clock provides a solid foundation, while the 4.20 GHz boost clock handles burst loads. The Cinebench R23 multi-core score of 15045 indicates strong overall throughput, but the game’s frame rates at 1440p and 4K do not improve proportionally to CPU capabilities—they are governed by the GPU. The CPU’s 32 MB of shared L3 cache helps maintain consistent frame pacing in busy scenes, though no min-FPS data is available for High and Ultra presets to confirm this.

Compared to its nearest rivals in synthetic benchmarks, the Ryzen 5 3600 sits within 0.2% of the Intel Core i7-1260P and AMD EPYC 7742, and within 0.2% of the Intel Core i5-11400 and AMD EPYC 7573X. This places the CPU in a competitive position, but in Evolve the practical differences are masked by the GPU bottleneck at most settings. At 1080p Low, the CPU is still capable of exceeding 200 FPS, which is well above the refresh rate of typical monitors, so users are unlikely to experience CPU-induced stutters unless they enable Ultra settings, where the GPU workload dominates.

FAQ

Q: What is the best resolution for this combo in Evolve?

A: The data shows 2560x1440 High offers a balanced experience at 89 FPS average, while 1920x1080 High reaches 133 FPS. For maximum smoothness, 1080p Low delivers 219 FPS, but 1440p Medium at 114 FPS provides a better visual-to-performance ratio.

Q: Does the RTX 5060 Ti 8 GB run out of VRAM at 4K in this game?

A: No sudden frame rate collapse is observed at 3840x2160. The average FPS at 4K High is 51, and at 4K Medium it is 65, with a minimum of 55 FPS, indicating the 8 GB buffer is sufficient for Evolve’s textures and geometry at this resolution.

Q: How does the CPU affect performance at 1080p versus 4K?

A: At 1080p Low, the CPU allows the GPU to reach 219 FPS, but at 4K Low the same CPU/GPU combo produces 84 FPS. The CPU is less of a factor at higher resolutions, as the GPU becomes the limiting component.

Q: What is the fps difference between Low and Ultra settings at 1440p?

A: Low settings produce 147 FPS, while Ultra drops to 62 FPS. This 85 FPS difference highlights the heavy GPU cost of Ultra presets, which may not be worth the visual gain for competitive play.

Q: Is this combo ranked well among other tested configurations?

A: The combo ranks 1096th out of 2872 tested combinations in Evolve, placing it in the top 38% of all systems. This is a mid-tier result, reflecting the GPU’s average synthetic benchmark score relative to other cards.

Q: Can this system maintain 60 FPS at 4K?

A: Only at Low settings, where the average FPS is 84. Medium settings average 65 FPS, but High and Ultra fall to 51 and 35 FPS respectively, so 4K 60 FPS is not achievable on High or Ultra presets.

Settings Recommendations

For a smooth experience, the Medium preset at 2560x1440 is the sweet spot, with an average of 114 FPS and a minimum of 97 FPS, ensuring no major dips below 60 FPS. This combination provides a substantial improvement over High settings, which average 89 FPS, while retaining most of the visual fidelity. At 1920x1080, Medium reaches 170 FPS with a minimum of 144 FPS, making it ideal for high-refresh-rate monitors. Low settings at 1440p (147 FPS) and 1080p (219 FPS) are excessive for most displays, and the visual trade-off is not justified unless targeting 240 Hz panels.

At 4K, the options are more constrained. Low settings average 84 FPS and are playable, while Medium drops to 65 FPS with a 55 FPS minimum, which can cause occasional stutter on 60 Hz displays. High at 4K averages 51 FPS and Ultra at 35 FPS are not recommended for consistent play. The data suggests that users with 1440p monitors should select Medium and adjust individual settings upward, as the GPU has headroom—the 114 FPS average leaves 26% performance margin before hitting the 1440p High ceiling of 89 FPS. For 1080p users, Ultra at 92 FPS is viable, but Medium at 170 FPS offers a better experience for fast-paced monster hunting.

The measured rows show that the gap between Medium and High is smaller than the gap between High and Ultra. At 1080p, Medium (170 FPS) to High (133 FPS) is a 37 FPS drop, while High to Ultra (92 FPS) is a 41 FPS drop. This indicates that Ultra settings impose a disproportionate cost, likely from shadow quality and post-processing effects, which are not worth the frame rate penalty on this hardware.

How This Combo Ranks

The combo rank of 1096 out of 2872 tested configurations places this system in the 62nd percentile of all combinations tested in Evolve. This is a mid-pack result, which aligns with the GPU’s synthetic percentile of 29 against all GPUs and the CPU’s percentile of 71 against all CPUs. The rank reflects that the RTX 5060 Ti, while modern, does not top the charts for raw rasterization in a 2015 title, and the Ryzen 5 3600 is a capable but not exceptional CPU. The GPU’s average benchmark score of 4901 sits within 0.6% of rivals like the AMD FirePro W5130M and Radeon R7 M265, indicating that the card’s measured performance in Evolve is consistent with its synthetic results.

The CPU’s nearest rival, the Intel Core i7-1260P, has a delta of 0.2% in average score, meaning the Ryzen 5 3600 is effectively tied with that part. This parity in CPU performance does not translate to a higher combo rank because the game’s frame rates are GPU-bound at most settings. The rank of 1096 suggests that many other combinations, likely with higher-tier GPUs, achieve better results in Evolve. However, the data confirms that this combo is not bottom-tier, and it handles 1080p and 1440p gaming well, with the 4K results being the weakest area.

Users comparing this system to others should note that the rank is specific to Evolve and may differ in other games. The measured FPS data shows that the combo can exceed 200 FPS at 1080p Low, which is better than many higher-ranked systems that may have slower CPUs. The rank is a composite measure, and the actual frame rates provide a more practical view of the system’s capabilities.

Measured FPS Breakdown

At 1920x1080, the measured average frame rates are 219 FPS on Low, 170 FPS on Medium, 133 FPS on High, and 92 FPS on Ultra. The Medium preset has a minimum of 144 FPS and a maximum of 195 FPS, showing a tight frame time distribution. No min or max data is provided for Low, High, or Ultra at this resolution, but the averages indicate a wide performance range. The 1080p results are the strongest for this combo, with even Ultra exceeding 90 FPS.

Moving to 2560x1440, the averages are 147 FPS on Low, 114 FPS on Medium, 89 FPS on High, and 62 FPS on Ultra. The Medium preset again has the only min/max data, with 97 FPS minimum and 131 FPS maximum. The drop from 1080p to 1440p is consistent across all settings, averaging a 33% reduction. At 1440p, Ultra remains playable at 62 FPS, but it is close to the threshold where frame pacing issues become noticeable on 60 Hz displays.

At 3840x2160, the averages fall to 84 FPS on Low, 65 FPS on Medium, 51 FPS on High, and 35 FPS on Ultra. The Medium preset has a minimum of 55 FPS and a maximum of 74 FPS, indicating that the 65 FPS average is attainable but with occasional dips below 60 FPS. Low at 4K is the only setting that provides a comfortable margin above 60 FPS, while High and Ultra do not meet the 60 FPS threshold. The 4K results show that this combo is not suited for max settings at that resolution, but it can deliver playable frame rates on lower presets.

GPU Role

The RTX 5060 Ti 8 GB is the dominant component in this pairing for Evolve, as evidenced by the resolution scaling and the large FPS differences between presets. The GPU’s boost clock of 2572 MHz and base clock of 2407 MHz, based on the Blackwell 2.0 architecture, provide the raw compute power for the game’s DirectX 12 rendering path. The 448.0 GB/s memory bandwidth over a 128-bit bus is sufficient for Evolve’s texture streaming, and the 8 GB GDDR7 buffer does not cause any resolution-specific issues in the measured data.

The GPU’s FP32 performance of 23.70 TFLOPS and texture rate of 370.4 GTexel/s are high, yet the synthetic benchmark percentile of 29 against all GPUs suggests that Evolve’s workload does not fully utilize these capabilities, or that the card’s drivers are not optimized for a 2015 title. The nearest GPU rivals in synthetic tests are the AMD FirePro W5130M and NVIDIA GeForce GTS 450, which are much older parts, indicating that the RTX 5060 Ti’s average benchmark score of 4901 is unremarkable. In Evolve, the GPU’s role is clear: it determines the frame rate at every resolution above 1080p Low, and its performance ceiling is reached at 4K Ultra where it only manages 35 FPS.

The GPU’s 48 ROPs and 144 TMUs handle the pixel and texture workloads, and the measured FPS shows that increasing resolution from 1080p to 4K scales nearly linearly with pixel count, confirming that the GPU’s shading units are the bottleneck. The card’s 180 W TDP and dual-slot design are adequate for the workload, and the PCIe 5.0 x8 interface provides ample bandwidth for the game’s data transfer needs. For users, the key takeaway is that the RTX 5060 Ti 8 GB is a mid-range card that excels at 1080p and 1440p in Evolve, but it lacks the headroom for 4K Ultra, where the frame rate drops below playable thresholds.

Hardware Specifications

AMD Ryzen 5 3600

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5060 Ti 8 GB

VRAM 8 GB GDDR7
Base Clock —
Boost Clock 2572 MHz MHz
TDP 180 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5060 Ti 8 GB in Evolve

Resolution Settings Avg FPS
3840x2160 Low 84.0
3840x2160 Medium 65.0
3840x2160 High 51.0
3840x2160 Ultra 35.0
2560x1440 Low 147.0
2560x1440 Medium 114.0
2560x1440 High 89.0
2560x1440 Ultra 62.0
1920x1080 Low 219.0
1920x1080 Medium 170.0
1920x1080 High 133.0
1920x1080 Ultra 92.0

Evolve with RTX 5060 Ti 8 GB + Other CPUs

See how Evolve performs with the same GPU but different processors.

Other Games with Ryzen 5 3600 + RTX 5060 Ti 8 GB

Explore FPS benchmarks for other games using this same hardware combination.