Downfall

Downfall

AVERAGE FPS
102
good

This combination provides smooth gameplay with an average of 102 FPS, suitable for most gaming scenarios.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 58 71 86
1440p QHD 58 93 114 139
1080p Full HD 81 130 159 194

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 86
3840x2160 Medium 71
3840x2160 High 58
3840x2160 Ultra 36
2560x1440 Low 139
2560x1440 Medium 114
2560x1440 High 93
2560x1440 Ultra 58
1920x1080 Low 194
1920x1080 Medium 159
1920x1080 High 130
1920x1080 Ultra 81

Downfall with Intel Core Ultra X9 388H + AMD Radeon RX 7800M, In-Depth Analysis

Downfall is a 2016 horror title that remains demanding on modern hardware, and the measured results for the Intel Core Ultra X9 388H paired with the AMD Radeon RX 7800M show a clear performance profile. The data indicates this mobile combo is capable of delivering high frame rates at 1080p and 1440p, but it begins to strain at 4K, particularly on the highest preset. The benchmark results reveal a system where the GPU is the primary bottleneck at higher resolutions, while the CPU provides a solid foundation for high-refresh-rate gaming at lower settings.

Resolution Scaling

The measured FPS data shows a steep performance curve as resolution increases, which is typical for a GPU-bound scenario in a horror game with heavy environmental effects. At 1080p, the combo produces an average of 194 FPS on Low settings, which is a very high frame rate that suggests the CPU is doing its job without holding the GPU back. However, when moving to 1440p, the Low preset drops to 139 FPS, and at 4K, it falls to 86 FPS. This scaling pattern shows a significant cost per pixel, with the 4K Low result representing a 55.7% reduction from the 1080p Low figure, indicating that the Radeon RX 7800M is being pushed hard as the resolution climbs.

On the Medium preset, the pattern is similar. The 1080p result is 159 FPS, which drops to 114 FPS at 1440p and 71 FPS at 4K. The 4K Medium result is the first to show a minimum FPS figure in the pack, with a 60 FPS floor and a maximum of 81 FPS, suggesting the experience is playable but with some noticeable variance. The High preset shows the most dramatic scaling, with 130 FPS at 1080p, 93 FPS at 1440p, and 58 FPS at 4K. The 4K High result is exactly at the threshold of smooth playability, but the lack of a minimum FPS data point for this setting means we cannot assess frame pacing dips. The Ultra preset is the most punishing, yielding 81 FPS at 1080p, 58 FPS at 1440p, and a low 36 FPS at 4K.

This data clearly shows that the limiting component changes with resolution. At 1080p, the high frame rates on Low and Medium (194 and 159 FPS) suggest the CPU is capable of feeding frames faster than the GPU can render them, but the system is still GPU-limited. At 4K, the performance collapse across all settings—especially the 36 FPS Ultra result—points squarely at the Radeon RX 7800M’s memory bandwidth and compute throughput being insufficient for the pixel count. The 12 GB of VRAM and 432 GB/s bandwidth are not enough to maintain high frame rates at 4K on demanding presets in this title.

FAQ

Q: What is the best resolution to play Downfall with this hardware for a consistent 60 FPS experience?

A: The data shows that 1440p is the sweet spot. On Medium settings, the system averages 114 FPS with a minimum of 97 FPS, which is well above 60. Even on High settings, the average is 93 FPS, providing a comfortable margin. At 4K, only the Low preset (86 FPS) and Medium preset (71 FPS) break the 60 FPS average threshold, but the Medium preset’s minimum FPS is exactly 60, which could lead to occasional dips below the target.

Q: How does the Ultra preset compare to High at 1080p?

A: The Ultra preset at 1080p averages 81 FPS, while High averages 130 FPS. This represents a 37.7% performance drop from High to Ultra. The data does not specify what visual features change, but the significant cost suggests Ultra introduces effects that heavily tax the GPU, making High the more practical choice for high refresh rate displays.

Q: Is the CPU or GPU more responsible for the frame rate drop between 1080p and 4K?

A: The data indicates the GPU is the primary bottleneck. The CPU is a 16-core, 16-thread Intel Core Ultra X9 388H with a boost clock of 5.10 GHz, which is capable of high single-thread performance. The drastic FPS reductions across all settings when scaling to 4K (e.g., High drops from 130 to 58 FPS) are characteristic of GPU limitations, not CPU limitations. The GPU’s benchmark percentile of 73 and its average score being close to the NVIDIA GeForce GTX 980 Ti support this conclusion.

Q: Can this system run Downfall at 4K with playable frame rates?

A: Yes, but only on lower presets. The Low preset averages 86 FPS, and the Medium preset averages 71 FPS with a minimum of 60 FPS. The High preset averages 58 FPS, which is borderline, and the Ultra preset at 36 FPS is not smooth. For a locked 60 FPS experience at 4K, the Medium preset is the highest you can reliably use.

Q: How does the Radeon RX 7800M’s performance in Downfall compare to its nearest rivals?

A: The GPU’s average benchmark score is 27,883, which is 0.2% higher than the AMD Radeon Pro Vega 20 (27,839) and 0.5% lower than the NVIDIA GeForce GTX 980 Ti (28,020). The measured FPS in Downfall reflects this mid-range positioning, as the system struggles at 4K Ultra but handles 1080p very well.

Q: What is the frame rate variance on the Medium preset?

A: The Medium preset is the only one with recorded minimum and maximum FPS values. At 1080p, the average is 159 FPS with a range of 135 to 183 FPS. At 1440p, the average is 114 FPS with a range of 97 to 131 FPS. At 4K, the average is 71 FPS with a range of 60 to 81 FPS. This indicates that the Medium preset provides a stable experience, with the variance in FPS being proportionally smaller at higher resolutions.

CPU Role

The Intel Core Ultra X9 388H is a mobile processor with 16 cores and 16 threads, based on the Panther Lake architecture and built on a 3 nm process. Its base clock is 2.10 GHz, and it boosts up to 5.10 GHz. The benchmark results show this CPU is no slouch, with a Cinebench R23 multi-core score of 18,911 and a single-core score of 2,200.5. The PassMark single-thread score of 4,280 further confirms strong single-core performance, which is critical for games like Downfall that often rely on a few main threads for gameplay logic.

In the measured FPS data, the CPU’s influence is most apparent at 1080p, where the system achieves 194 FPS on Low settings. This high frame rate suggests the CPU is not a limiting factor at this resolution, as it can process the game’s simulation and physics faster than the GPU can render frames. The fact that the CPU’s average benchmark score (44,466) is nearly identical to its nearest rival, the AMD Ryzen 5 7500X3D (44,573), with a -0.2% delta, shows that this processor is competitive in general compute tasks. However, the lack of multi-threading (16 threads for 16 cores) could be a theoretical concern, but the data shows it does not hinder performance in this specific title.

The CPU’s 18 MB of shared L3 cache and 153.6 GB/s memory bandwidth are also relevant. The data does not provide direct game-specific CPU benchmarks, but the high frame rates at 1080p indicate that the memory subsystem is sufficient. As resolution increases, the CPU’s role diminishes, and the GPU’s rendering load becomes the dominant factor. The performance drop from 1080p to 4K is consistent across all settings, which is a classic sign of a GPU bottleneck. For a horror title with complex lighting and shadow rendering, the CPU is more than capable of sustaining high frame rates, but it cannot compensate for the GPU’s limitations at higher resolutions.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the system delivers its best results. The Low preset averages 194 FPS, which is the highest score recorded in the entire dataset. The Medium preset averages 159 FPS, with a minimum of 135 FPS and a maximum of 183 FPS. The High preset averages 130 FPS, and the Ultra preset averages 81 FPS. These numbers show that at 1080p, every preset is playable, and even the demanding Ultra setting maintains a frame rate above 60 FPS.

Moving to 2560x1440, the performance scales down but remains strong. The Low preset averages 139 FPS, a 28.4% drop from the 1080p Low result. The Medium preset averages 114 FPS, with a minimum of 97 FPS and a maximum of 131 FPS. The High preset averages 93 FPS, and the Ultra preset averages 58 FPS. The Ultra preset at 1440p is the first to dip below the 60 FPS average threshold, indicating that this setting is too demanding for a smooth experience at this resolution. The Medium preset remains the best option for a high-refresh-rate monitor at 1440p, as its minimum FPS of 97 ensures no drops below 60.

At 3840x2160, the system’s limitations become clear. The Low preset averages 86 FPS, which is still playable. The Medium preset averages 71 FPS, with a minimum of 60 FPS and a maximum of 81 FPS, making it the only preset that can realistically maintain a 60 FPS experience at 4K. The High preset averages 58 FPS, which is below the ideal threshold but may be acceptable for some players. The Ultra preset averages 36 FPS, which is not smooth and indicates a significant performance hit. The difference between the Low and Ultra presets at 4K is 50 FPS, showing the massive cost of the highest visual quality settings.

GPU Role

The AMD Radeon RX 7800M is the clear performance driver in this combo. It is a mobile GPU based on the Navi 32 chip, using the RDNA 3.0 architecture and built on a 5 nm process. It has 3,840 shading units, 240 TMUs, and 96 ROPs, with a boost clock of 2,335 MHz and a game clock of 2,145 MHz. The GPU is equipped with 12 GB of GDDR6 memory on a 192-bit bus, providing 432.0 GB/s of bandwidth. The benchmark data shows a PassMark G3D score of 17,613 and a Geekbench OpenCL score of 120,778, positioning it in the 73rd percentile of all GPUs.

The GPU’s role in Downfall is evident from the resolution scaling. At 1080p, the GPU can render frames quickly, but it is still the limiting factor when moving up to 1440p and 4K. The 12 GB VRAM size is sufficient for this 2016 title, even at 4K, but the memory bandwidth is not. The 432 GB/s bandwidth is a bottleneck at 4K, as the pixel fill rate and texture rate (224.2 GPixel/s and 560.4 GTexel/s, respectively) are not high enough to sustain high frame rates on demanding presets. The GPU’s nearest rival, the NVIDIA GeForce GTX 980 Ti, has a similar average benchmark score (28,020 vs. 27,883), which explains why the 4K Ultra performance is so low; this is a GPU that was designed for 1080p and 1440p gaming, not 4K.

The GPU’s DirectX 12 Ultimate support and Vulkan 1.4 compatibility mean it is fully capable of handling the modern APIs that Downfall might use, but the raw compute power is what matters. The FP32 performance of 35.87 TFLOPS is decent, but it is not enough to push 4K Ultra in a game with heavy post-processing effects. The data shows that the GPU is the primary determinant of frame rate, and its performance ceiling is reached at 4K Medium, where it averages 71 FPS.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this hardware depend on the target resolution and refresh rate. For 1080p gaming, the High preset is the best choice for a high-refresh-rate display, delivering 130 FPS on average. The Ultra preset at 81 FPS is also viable if you prefer maximum visual quality, but the 49 FPS drop from High to Ultra suggests a heavy cost for marginal visual gains. The Medium preset at 159 FPS is ideal for competitive play or 144Hz displays, but it sacrifices visual fidelity for performance.

For 1440p, the Medium preset is the recommended sweet spot. It averages 114 FPS with a minimum of 97 FPS, ensuring a smooth experience on standard 60Hz and 144Hz monitors. The High preset at 93 FPS is also playable, but the Ultra preset at 58 FPS is borderline and should be avoided if you want consistent frame times. The Low preset at 139 FPS is unnecessary unless you have a very high refresh rate monitor (165Hz or higher) and prioritize performance over visuals.

For 4K, the Medium preset is the highest you should consider. It averages 71 FPS with a minimum of 60 FPS, providing a playable experience with some headroom. The Low preset at 86 FPS is the smoothest option at this resolution, but it will look noticeably worse. The High preset at 58 FPS is playable but risky, as it may dip below 60 FPS. The Ultra preset at 36 FPS is not recommended, as it falls well short of smooth playability. In summary, the data suggests that the Medium preset offers the best balance of visual quality and performance across all resolutions, with the 1440p Medium configuration being the standout choice for this hardware.

Hardware Specifications

Intel Core Ultra X9 388H

Cores / Threads 16 / 16
Base Clock 2100 MHz
Boost Clock 5100 MHz
TDP 25W
Socket Intel BGA 2540
View Full CPU Details →

AMD Radeon RX 7800M

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2335 MHz MHz
TDP 180 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra X9 388H + AMD Radeon RX 7800M in Downfall

Resolution Settings Avg FPS
3840x2160 Low 86.0
3840x2160 Medium 71.0
3840x2160 High 58.0
3840x2160 Ultra 36.0
2560x1440 Low 139.0
2560x1440 Medium 114.0
2560x1440 High 93.0
2560x1440 Ultra 58.0
1920x1080 Low 194.0
1920x1080 Medium 159.0
1920x1080 High 130.0
1920x1080 Ultra 81.0

Downfall with iUltra X9 388H + Other GPUs

See how Downfall performs with the same CPU but different graphics cards.

Other Games with iUltra X9 388H + RX 7800M

Explore FPS benchmarks for other games using this same hardware combination.