Doom
This combination delivers exceptional performance with an average of 124 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 49 | 60 | 71 | 82 |
| 1440p QHD | 91 | 111 | 131 | 151 |
| 1080p Full HD | 140 | 171 | 203 | 233 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Doom with Intel Core i3-12100F + AMD Radeon RX 9060 XT 8 GB, In-Depth Analysis
How This Combo Ranks
The Intel Core i3-12100F and AMD Radeon RX 9060 XT 8 GB combination ranks 1890th out of 3712 tested combos in Doom, placing it in the upper-middle portion of the database. This rank reflects a pairing where the GPU's 3DMark Steel Nomad DX12 score of 4093 places it at the 24th percentile among all GPUs, while the CPU's average benchmark score of 13494 puts it at the 68th percentile among all CPUs. The asymmetry is notable: the processor is considerably stronger relative to its peers than the graphics card, yet in Doom the system still delivers playable frame rates at every resolution tested.
The combo sits in a crowded field, with the GPU's nearest rivals being the Intel HD Graphics 630 (0.4% ahead), NVIDIA Quadro K2100M (1.4% ahead), NVIDIA GeForce GT 755M (1.5% behind), and AMD Radeon R5 M330 (1.8% behind). These deltas are tiny, meaning the RX 9060 XT's raw 3DMark performance is essentially clustered with much older or integrated solutions — a surprising result for a card with RDNA 4.0 architecture. The CPU, meanwhile, trades blows with the Intel Core 3 N355 (0% delta), Intel Core i5-9500 (0.3% ahead), Intel Core 5 120UL (0.7% behind), and Intel Core i7-1250U (1.1% ahead).
Doom is an older title from 2016, and its engine scales well across hardware tiers. The rank of 1890 out of 3712 suggests that while this combo is not a top performer, it is far from the bottom — and the measured FPS data confirms that the experience is smooth even at 4K. The data indicates the bottleneck shifts depending on resolution and settings, with the GPU becoming more limiting as load increases. At 1080p Low, the system hits 233 FPS average, which is excellent for fast-paced FPS play. At 4K Ultra, it drops to 49 FPS average, still technically playable but below the 60 FPS threshold many players prefer.
GPU Role
The AMD Radeon RX 9060 XT 8 GB is built on the Navi 44 chip with RDNA 4.0 architecture, fabricated on TSMC's 4 nm process with 29,700 million transistors on a 199 mm² die. The card's base clock is 1700 MHz, with a boost clock of 3130 MHz and a game clock of 2530 MHz. Memory runs at 2518 MHz with 20.1 Gbps effective speed across a 128-bit bus, yielding 322.3 GB/s of bandwidth. The 8 GB GDDR6 frame buffer is the defining characteristic here — it is sufficient for Doom at the tested resolutions, as the game's 2016 engine does not demand the massive VRAM pools of modern titles.
The GPU's shading units number 2048, with 128 texture mapping units and 64 raster output units. It also includes 32 ray tracing cores, though Doom does not utilize ray tracing, so this hardware remains idle in this title. The pixel rate is 200.3 GPixel/s and texture rate is 400.6 GTexel/s, with FP32 performance of 25.64 TFLOPS (and FP16 at 25.64 TFLOPS with 1:1 ratio). These specifications translate to raw throughput that should handle Doom's Vulkan-based engine with ease, and the measured data confirms this.
The GPU's 3DMark Steel Nomad DX12 score of 4093 is modest, placing it at the 24th percentile of all GPUs. In the context of Doom, however, this score underrepresents the card's real-world capability because the benchmark is a modern DX12 test, while Doom's engine is more forgiving. The measured FPS at 1080p High (171 FPS average) and 1440p High (111 FPS average) indicates the card has ample headroom for this game. At 4K High, the average drops to 60 FPS exactly — a threshold that suggests the GPU is right at its limit for that resolution and preset.
The card's 150 W TDP and single 8-pin power connector, with a suggested 450 W PSU, make it a straightforward drop-in upgrade. The PCIe 5.0 x16 interface provides ample bandwidth, though Doom is not bandwidth-sensitive at these frame rates. The 8 GB VRAM is the key constraint; while it does not bottleneck in Doom, the data shows that Ultra settings at 4K push the card to 49 FPS, indicating that both compute and memory bandwidth are being taxed.
Settings Recommendations
For the best experience per the measured rows, the Medium preset at any resolution offers the most balanced combination of visual fidelity and frame rate stability. At 1080p Medium, the system delivers 203 FPS average with a minimum of 172 FPS and maximum of 233 FPS — a tight window that ensures consistent performance during intense combat sequences. The jump from Low to Medium costs only 30 FPS (from 233 to 203), while the jump from Medium to Ultra costs 63 FPS (from 203 to 140), making Medium the sweet spot for high-refresh-rate monitors.
At 1440p, Medium produces 131 FPS average with a minimum of 112 FPS and maximum of 151 FPS. This is ideal for 144 Hz displays, providing enough overhead to avoid drops below the refresh rate. High settings at 1440p yield 111 FPS average, which is still smooth but leaves less margin. Ultra at 1440p drops to 91 FPS average, which is playable but misses the 100+ FPS target many FPS players prefer.
At 4K, Medium is the only sensible choice for a 60 FPS experience: it averages 71 FPS with a minimum of 60 FPS and maximum of 82 FPS. High settings at 4K hit exactly 60 FPS average, but with no stated minimum, the risk of dips below 60 FPS is real. Low settings at 4K reach 82 FPS average, which is smoother but visually compromised. Ultra at 4K at 49 FPS average is below the 60 FPS standard and should be avoided unless the player prioritizes image quality over fluidity.
The data supports a clear hierarchy: Medium is the best default preset across all resolutions. It provides the highest frame rates while maintaining a consistent minimum-to-maximum spread that indicates stable performance. For competitive play at 1080p, Low at 233 FPS average is the fastest option, but the visual trade-off is significant. The recommendation is to use Medium at 1080p or 1440p for the best balance, and Medium at 4K if the display supports it.
Measured FPS Breakdown
At 1920x1080, the system's performance scales predictably with settings. Low delivers 233 FPS average, Medium 203 FPS (minimum 172, maximum 233), High 171 FPS, and Ultra 140 FPS. The gap between Low and Ultra is 93 FPS, representing a 40% reduction in frame rate when maxing out all visual options. This is a manageable trade-off — even at Ultra, the 140 FPS average exceeds the refresh rate of most 1080p monitors, so players with 144 Hz displays can run any preset without issue.
At 2560x1440, the pattern continues but with lower absolute numbers. Low produces 151 FPS average, Medium 131 FPS (minimum 112, maximum 151), High 111 FPS, and Ultra 91 FPS. The spread from Low to Ultra is 60 FPS, a 40% drop that mirrors the 1080p scaling. The minimum of 112 FPS at Medium indicates that even in the most demanding scenes, the system stays above 100 FPS, which is excellent for 1440p gaming on a 120 Hz or 144 Hz display.
At 3840x2160, performance tightens considerably. Low reaches 82 FPS average, Medium 71 FPS (minimum 60, maximum 82), High 60 FPS, and Ultra 49 FPS. The step from Low to Medium costs 11 FPS, Medium to High costs another 11 FPS, and High to Ultra costs another 11 FPS — a remarkably linear scaling pattern. The minimum of 60 FPS at Medium is the critical data point: it shows that the system can hold 60 FPS even in worst-case scenarios at this preset, while High's 60 FPS average without a stated minimum implies occasional dips below the threshold.
The measured data shows no anomalies or outliers. The FPS values are consistent with the hardware's specifications, and the scaling from Low to Ultra follows an expected curve. The maximum FPS values at Medium (233 at 1080p, 151 at 1440p, 82 at 4K) align with the average values, confirming that the frame pacing is stable. The minimum FPS values available (172 at 1080p Medium, 112 at 1440p Medium, 60 at 4K Medium) all sit within 15% of their respective averages, indicating no severe frame time spikes.
Resolution Scaling
The frame rate drop from 1080p to 4K reveals where the bottleneck lies. At Low settings, the system goes from 233 FPS at 1080p to 151 FPS at 1440p (a 35% reduction) and then to 82 FPS at 4K (a 46% reduction from 1440p). At Medium settings, the progression is 203 FPS at 1080p, 131 FPS at 1440p (35% drop), and 71 FPS at 4K (46% drop). At High settings, it goes from 171 FPS at 1080p to 111 FPS at 1440p (35% drop) and 60 FPS at 4K (46% drop). At Ultra, the numbers are 140 FPS at 1080p, 91 FPS at 1440p (35% drop), and 49 FPS at 4K (46% drop).
The consistent 35% drop from 1080p to 1440p and 46% drop from 1440p to 4K across all settings is a strong indicator that the GPU is the limiting component. The pixel count increases by 78% from 1080p to 1440p (2,073,600 to 3,686,400 pixels), and by 125% from 1440p to 4K (3,686,400 to 8,294,400 pixels). If the CPU were the bottleneck, the frame rate would not scale so consistently with resolution — we would see smaller drops at higher resolutions as the GPU becomes more utilized. Instead, the near-perfect linear scaling suggests the GPU is fully saturated at each resolution and settings combination.
The 4K to 1080p ratio is particularly telling. At Low, 4K delivers 82 FPS versus 233 FPS at 1080p, a 65% reduction. This is larger than the 46% reduction seen from 1440p to 4K, indicating that the GPU's memory bandwidth (322.3 GB/s) and 8 GB VRAM are being stressed at 4K. The 128-bit memory bus is the likely constraint — at 4K, the card must fetch more texture data and geometry, and the bandwidth simply cannot keep up with the pixel throughput demands.
The CPU's role in this scaling is minimal. The Intel Core i3-12100F with its 4 cores and 8 threads, boosting to 4.30 GHz, is capable of feeding the GPU at all resolutions. The data shows that even at 1080p Low with 233 FPS, the CPU does not become a limiting factor — if it did, we would see the frame rate plateau at lower resolutions rather than scale linearly. The conclusion is clear: the RX 9060 XT is the primary determinant of performance in Doom, and its capabilities define the experience across all settings and resolutions.
CPU Role
The Intel Core i3-12100F is a 4-core, 8-thread processor based on Alder Lake architecture, built on Intel's 10 nm process with a 58 W TDP. Its base clock is 3.30 GHz with a boost clock of 4.30 GHz, and it features 80 KB of L1 cache per core, 1.25 MB of L2 per core, and 12 MB of shared L3 cache. The CPU supports DDR4 and DDR5 memory in dual-channel mode, and its PCIe Gen 5 interface with 16 lanes (CPU only) provides ample bandwidth for the GPU.
In synthetic benchmarks, the i3-12100F scores 11860 in Cinebench R23 multi-core and 1674 in single-core, with Geekbench scores of 7252 multi-core and 1932 single-core. The 3DMark results show 4051 with 16 threads and 893 single-threaded. These scores place the CPU at the 68th percentile of all CPUs, with an average benchmark score of 13494. Its nearest rival, the Intel Core 3 N355, scores 13492 with a 0% delta, while the Intel Core i5-9500 scores 13452 (0.3% ahead) and the Intel Core 5 120UL scores 13594 (0.7% behind).
For Doom, the CPU's role is to maintain high frame rates by feeding the GPU with draw calls and physics calculations. The 4-core, 8-thread configuration is sufficient for this 2016 title, which was designed to run on quad-core processors of that era. The boost clock of 4.30 GHz provides strong single-threaded performance, which is critical for Doom's engine — the game's Vulkan renderer benefits from high IPC and clock speed rather than many cores.
The measured FPS data confirms that the CPU is not a bottleneck in this pairing. At 1080p Low, the system achieves 233 FPS average, which is well above what the GPU can sustain at higher settings. If the CPU were limiting, we would see the frame rate cap out regardless of resolution or settings. Instead, the scaling from Low to Ultra at each resolution shows a consistent pattern that tracks the GPU's workload. The CPU's 3DMark 2-thread score of 1659 and single-thread score of 893 indicate solid single-core performance, which is what Doom primarily utilizes.
The PassMark single-thread score of 3444 further corroborates this — the i3-12100F is a capable single-threaded performer. Its multi-threaded score of 14015 is less relevant for Doom, as the game does not scale well beyond 8 threads. The CPU's 12 MB L3 cache is also beneficial, as it reduces memory latency for frequently accessed game data. In summary, the i3-12100F provides more than enough computational headroom for Doom, and the GPU is the definitive performance limiter in this combo.
Hardware Specifications
Intel Core i3-12100F
AMD Radeon RX 9060 XT 8 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + AMD Radeon RX 9060 XT 8 GB in Doom
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 82.0 |
| 3840x2160 | Medium | 71.0 |
| 3840x2160 | High | 60.0 |
| 3840x2160 | Ultra | 49.0 |
| 2560x1440 | Low | 151.0 |
| 2560x1440 | Medium | 131.0 |
| 2560x1440 | High | 111.0 |
| 2560x1440 | Ultra | 91.0 |
| 1920x1080 | Low | 233.0 |
| 1920x1080 | Medium | 203.0 |
| 1920x1080 | High | 171.0 |
| 1920x1080 | Ultra | 140.0 |
Doom with ii3-12100F + Other GPUs
See how Doom performs with the same CPU but different graphics cards.
Doom with RX 9060 XT 8 GB + Other CPUs
See how Doom performs with the same GPU but different processors.
Other Games with ii3-12100F + RX 9060 XT 8 GB
Explore FPS benchmarks for other games using this same hardware combination.