Dave The Diver

Dave The Diver is not a demanding title by modern standards, and the measured data for the AMD Ryzen 5 8400F with the NVIDIA GeForce RTX 2060 confirms this. This pairing delivers playable frame rates even at 4K, with the primary bottleneck shifting clearly from the CPU to the GPU as resolution increases. The following analysis breaks down exactly how this combination behaves, where it stands among other tested systems, and what settings give you the best experience.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals that the RTX 2060 becomes the limiting factor at higher resolutions. At High settings, the average frame rate falls from 132.4 FPS at 1920x1080 to 101.4 FPS at 2560x1440, a reduction of roughly 23%. Moving to 3840x2160, the average drops further to 68.8 FPS, which is about 48% lower than the 1080p result. This scaling pattern is typical for a GPU with a 192-bit memory bus and 6 GB of GDDR6, as the pixel throughput demand at 4K outpaces what the TU106 chip can deliver.

The trend is consistent across all settings presets. At Low settings, the 1080p average of 176.6 FPS falls to 133.5 FPS at 1440p and then to 91.5 FPS at 4K. The gap between 1440p and 4K remains proportionally large, indicating that the GPU is saturated regardless of the graphical load. Interestingly, the difference between Low and High at 1080p is only about 44 FPS (176.6 vs 132.4), which suggests that the CPU has enough headroom to feed the GPU even when settings are lowered. This is a sign that the Ryzen 5 8400F, with its 6 cores and 12 threads, is not holding the system back at lower resolutions.

At 4K, the scaling becomes more compressed. The spread from Low (91.5 FPS) to Ultra (59.7 FPS) is just under 32 FPS, whereas at 1080p that same spread is over 61 FPS. This compression is a classic symptom of a GPU-bound scenario: when the render resolution is high, the graphics card is working near its maximum capacity, and changing settings has a smaller relative impact. The data shows that the RTX 2060 is the definitive limiter at 4K, while the CPU contributes little to the performance ceiling.

How This Combo Ranks

Within the benchmark database, this specific combination of the Ryzen 5 8400F and RTX 2060 ranks 1345 out of 1626 tested combos in Dave The Diver. That places it in the lower-middle tier of all configurations, which is expected given the GPU’s age and end-of-life production status. The RTX 2060 sits at the 58th percentile among all GPUs, while the Ryzen 5 8400F is at the 82nd percentile among all CPUs. This discrepancy reinforces that the GPU is the weaker link in this pairing.

Looking at the nearest rivals for the CPU, the Ryzen 5 8400F’s average benchmark score of 25064 is nearly identical to the AMD Ryzen 7 2700X (25057, delta 0%) and the AMD Ryzen 5 7500F (24993, delta 0.3%). This means the processor is performing exactly where expected for its class, with no unusual bottlenecks. The GPU’s nearest rivals are also closely matched: the AMD Radeon RX 7600S is just 0.5% ahead, while the AMD Radeon Pro 5700 is 1.7% behind. This tight clustering suggests the RTX 2060 is delivering consistent, predictable results for its hardware generation.

In the context of Dave The Diver specifically, the rank of 1345 out of 1626 means there are many faster combinations, but also 281 combos that are slower. Given that the game is an adventure title with modest graphical demands, this rank is perfectly serviceable. The measured FPS at 1080p Ultra (115.3 FPS) is well above the 60 FPS threshold, and even 4K Ultra (59.7 FPS) is right at the edge of smooth gameplay. The combo is not a top-tier performer, but it does not need to be for this game.

FAQ

Q: Is the AMD Ryzen 5 8400F a bottleneck for the RTX 2060 in this game?

A: No. The CPU scores at the 82nd percentile among all processors, and its nearest rival, the AMD Ryzen 7 2700X, has a nearly identical average benchmark score (25057 vs 25064, delta 0%). At 1080p Low, the system reaches 176.6 FPS, which indicates the CPU can feed the GPU well beyond typical display refresh rates.

Q: Can this combo handle 4K gaming in Dave The Diver?

A: Yes, but with caveats. At 4K High, the average FPS is 68.8, which is smooth. At 4K Ultra, it drops to 59.7 FPS, which is still playable but close to the 60 FPS line. For a locked 60 FPS experience, Medium settings at 4K (72.8 FPS) are safer.

Q: How does the RTX 2060 compare to its closest rivals?

A: The RTX 2060’s average benchmark score is 16074, placing it at the 58th percentile. The AMD Radeon RX 7600S is 0.5% faster, while the AMD Radeon Pro 5700 is 1.7% slower. This means the RTX 2060 is right in the middle of its performance tier.

Q: What is the best resolution for this combo?

A: 2560x1440 offers the best balance. At High settings, it averages 101.4 FPS, which is well above 60 FPS and only a 23% drop from 1080p. The 1080p results are higher (132.4 FPS at High), but 1440p provides a sharper image without sacrificing smoothness.

Q: Does the 6 GB VRAM limit the RTX 2060?

A: The data suggests it does not for this game. At 4K Ultra, the average FPS is 59.7, which is close to 60, and the GPU’s memory bandwidth of 336.0 GB/s is sufficient for the title. There are no min FPS values recorded, so there is no evidence of stuttering from VRAM overflow.

Q: Is the Ryzen 5 8400F a good match for the RTX 2060?

A: Yes. The CPU’s 6 cores and 12 threads, combined with a boost clock of 4.70 GHz, provide ample performance for a mid-range GPU. The fact that the combo ranks 1345 out of 1626, with many slower options, confirms that this pairing does not create a significant CPU-side constraint in Dave The Diver.

Measured FPS Breakdown

At 1920x1080, the system delivers high frame rates across all presets. Low settings average 176.6 FPS, Medium 146.4 FPS, High 132.4 FPS, and Ultra 115.3 FPS. The step from Low to Ultra costs about 61 FPS, which is a substantial drop but still leaves the game comfortably playable on any high-refresh monitor.

Moving to 2560x1440, the averages are 133.5 FPS at Low, 110.2 FPS at Medium, 101.4 FPS at High, and 88.1 FPS at Ultra. The gap between Low and Ultra narrows to about 45 FPS, showing that the GPU starts to become more of a factor. All results remain above 60 FPS, with Ultra still providing a smooth experience.

At 3840x2160, the performance drops significantly. Low settings average 91.5 FPS, Medium 72.8 FPS, High 68.8 FPS, and Ultra 59.7 FPS. This is the only resolution where Ultra dips below 60 FPS. The difference between Low and Ultra is just under 32 FPS, indicating that the GPU is fully utilized and settings have a diminished impact. The 4K results are still playable, but users targeting a locked 60 FPS should stick to High or below.

The data shows a clear pattern: the RTX 2060 is capable of handling Dave The Diver at 4K, but the margin for error is thin. At 1080p and 1440p, the combo has plenty of headroom, making it ideal for high-refresh displays.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture with a TU106 chip manufactured on a 12 nm process. It has 1920 shading units, 120 texture mapping units, and 48 ROPs, along with 30 RT cores and 240 tensor cores. The GPU’s boost clock is 1680 MHz, and it features 6 GB of GDDR6 memory on a 192-bit bus, delivering 336.0 GB/s of bandwidth. These specs place the RTX 2060 at the 58th percentile among all GPUs, with an average benchmark score of 16074.

In Dave The Diver, the GPU’s role is clear: it is the primary determinant of performance at higher resolutions. The measured FPS at 4K High (68.8) versus 1080p High (132.4) shows a 48% reduction, which correlates with the increased pixel load. The 6 GB VRAM appears sufficient for this game, as there is no evidence of a memory capacity bottleneck even at 4K Ultra. The memory bandwidth of 336.0 GB/s is adequate for the game’s texture and geometry demands.

The RTX 2060’s nearest rivals include the AMD Radeon RX 7600S (0.5% faster), the AMD Radeon Pro 5600M (1.7% slower), and the AMD Radeon Pro W5500 (1.8% faster). This close grouping means the RTX 2060 is performing at the expected level for its class. The GPU’s end-of-life status and 160 W TDP suggest it is an older part, but the data shows it still holds up well for this particular title.

Settings Recommendations

For a 60 FPS target, the best experience is found at 1440p with High settings, which averages 101.4 FPS. This provides a significant visual upgrade over 1080p while maintaining a large performance cushion. If the display is 1080p, Ultra settings are the clear choice, as the 115.3 FPS average is well above the 60 FPS threshold and offers the best image quality.

At 4K, the recommendation is to use High settings (68.8 FPS) rather than Ultra (59.7 FPS). The 9 FPS difference between the two presets is noticeable, but High ensures a smoother experience without dipping below 60 FPS. Medium settings at 4K (72.8 FPS) are also a viable option if users want extra headroom for demanding scenes.

For users with high-refresh monitors at 1080p, Low settings (176.6 FPS) or Medium (146.4 FPS) will push frame rates high enough to take advantage of a 144 Hz display. However, the visual trade-off may not be worth it for a game like Dave The Diver, which benefits from the detailed underwater environments. The data suggests that High settings at 1440p is the sweet spot for this combo, balancing frame rate and visual fidelity.