Cyberpunk 2077

Cyberpunk 2077

AVERAGE FPS
84
good

This combination provides smooth gameplay with an average of 84 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 52 55 74 88
1440p QHD 79 81 90 101
1080p Full HD 88 89 100 112

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 88
3840x2160 Medium 74
3840x2160 High 55
3840x2160 Ultra 52
2560x1440 Low 101
2560x1440 Medium 90
2560x1440 High 81
2560x1440 Ultra 79
1920x1080 Low 112
1920x1080 Medium 100
1920x1080 High 89
1920x1080 Ultra 88

Cyberpunk 2077 with Intel Core i3-12100F + NVIDIA GeForce RTX 4090, In-Depth Analysis

Resolution Scaling

The measured frame rates across resolutions reveal a system that is heavily constrained by the CPU, even when paired with one of the most powerful GPUs available. At 1080p, the frame rate ceiling is remarkably low for an RTX 4090, with the Ultra preset delivering just 88 FPS. Dropping to Low settings at 1080p only raises the average to 112 FPS, a modest gain that underscores the processor's inability to feed the GPU enough data to reach higher frame rates.

Moving from 1080p to 1440p, the scaling is surprisingly flat. The High preset drops from 89 FPS at 1080p to 81 FPS at 1440p, a reduction of roughly 9%. The Low preset sees a similar trend, falling from 112 FPS to 101 FPS. This relatively small performance penalty suggests that the resolution increase is not yet stressing the GPU's immense compute resources; instead, the bottleneck remains firmly on the CPU side, with the graphics card waiting for instructions.

The transition to 4K finally begins to shift the balance toward the GPU. At 3840x2160, the High preset delivers 55 FPS, representing a 32% drop from the 1440p result. The Low preset at 4K achieves 88 FPS, which is a 13% decrease from 1440p. This is where the RTX 4090's raw power starts to become the limiting factor, as the pixel throughput demands begin to outpace the CPU's ability to prepare frames.

The scaling pattern between 1440p and 4K is telling. For the Medium preset, the average FPS falls from 90 at 1440p to 74 at 4K, a decline of 18%. The Ultra preset drops from 79 to 52 FPS, a 34% reduction. These larger percentage drops at higher resolutions confirm that the GPU is increasingly engaged, yet even at 4K Ultra, the system only manages 52 FPS — a figure that would be disappointing for this GPU in most other titles, but here it reflects the severe CPU limitation.

GPU Role

The NVIDIA GeForce RTX 4090 is a monster of a graphics card, built on the Ada Lovelace architecture with a 5 nm process from TSMC. Its specifications are staggering: 16,384 shading units, 512 texture mapping units, and 176 raster operators. The chip contains 76,300 million transistors on a 609 mm² die, with a transistor density of 125.3M per mm². Clock speeds are set at 2235 MHz base and 2520 MHz boost, which are high for a GPU of this size.

Memory configuration is equally impressive. The card carries 24 GB of GDDR6X on a 384-bit bus, yielding a bandwidth of 1.01 TB/s. The memory clock runs at 1313 MHz, with an effective data rate of 21 Gbps. This massive memory pool and bandwidth are designed to feed the 82.58 TFLOPS of FP32 compute power, along with 128 RT cores and 512 tensor cores for ray tracing and DLSS workloads.

Despite this hardware arsenal, the measured results in Cyberpunk 2077 show the GPU being held back. At 1080p, the difference between Low and Ultra settings is only 24 FPS (112 vs 88), which is a narrow spread for a card with this much headroom. The GPU is clearly capable of far more, but the Intel Core i3-12100F cannot issue draw calls fast enough to keep the rendering pipeline saturated.

The VRAM capacity of 24 GB is far beyond what Cyberpunk 2077 requires at any of the tested settings, even at 4K Ultra. This means memory capacity is not a limiting factor in any of the measured results. Similarly, the PCIe 4.0 x16 interface provides ample bandwidth for data transfer, so the bus is not a constraint. The bottleneck is purely computational, with the CPU unable to maintain the instruction stream.

How This Combo Ranks

The combination of the Intel Core i3-12100F and NVIDIA GeForce RTX 4090 achieves a combo rank of 366 out of 3,716 tested combinations in Cyberpunk 2077. This places the pairing in the top 10% of all combos, which might sound impressive, but the context is crucial. The rank reflects the absolute frame rates, which are still respectable, but it does not account for the fact that the GPU is severely underutilized.

Looking at the CPU's position in the broader benchmark landscape, the i3-12100F sits at the 68th percentile among all CPUs, with an average benchmark score of 13,494. Its nearest rivals include the Intel Core 3 N355 with a score of 13,492 (0% delta), the Intel Core i5-9500 at 13,452 (0.3% ahead), the Intel Core 5 120UL at 13,594 (0.7% behind), and the Intel Core i7-1250U at 13,351 (1.1% ahead). This clustering shows that the i3-12100F is competitively positioned for CPU-bound tasks, but it is nowhere near the performance tier needed to fully drive an RTX 4090.

The GPU, by comparison, ranks at the 88th percentile among all GPUs, with an average benchmark score of 60,347. Its nearest rivals are the Intel Arc Pro A60 at 60,326 (0% delta), the AMD Radeon Pro Vega 48 at 60,140 (0.3% behind), the AMD Radeon Pro W6600M at 61,896 (2.5% ahead), and the AMD Radeon PRO V710 at 58,657 (2.9% ahead). The RTX 4090 is clearly a top-tier graphics card, yet in this pairing it is dragged down by the entry-level processor.

The disparity between the CPU's 68th percentile and the GPU's 88th percentile highlights the fundamental imbalance of this combo. The frame rates achieved in Cyberpunk 2077 are closer to what a mid-range GPU would produce, indicating that the system is wasting the 4090's potential. The combo rank of 366 would be far higher if the CPU could keep pace, but as it stands, the pairing underperforms relative to its components' individual capabilities.

Settings Recommendations

Given the measured data, the optimal settings for this combo depend heavily on the target resolution and the user's priority for visual fidelity versus frame rate. At 1080p, the Low preset produces 112 FPS, which is the highest average frame rate recorded across all configurations. The Medium preset drops to 100 FPS, while High and Ultra deliver 89 and 88 FPS, respectively. For competitive or high-refresh-rate play, Low is the clear choice, but the margin over Medium is only 12 FPS.

At 1440p, the Low preset again leads with 101 FPS, followed by Medium at 90, High at 81, and Ultra at 79. The jump from Low to Medium costs 11 FPS, while the jump from Medium to High costs 9 FPS. The difference between High and Ultra is just 2 FPS, making High the better choice if visual quality is desired, since Ultra offers no meaningful performance benefit.

At 4K, the situation becomes more nuanced. The Low preset achieves 88 FPS, which is still playable, but the Medium preset drops to 74 FPS with a minimum of 63 and a maximum of 86. High falls to 55 FPS, and Ultra bottoms out at 52 FPS. For a smooth experience at 4K, Medium is the highest setting that maintains an average above 60 FPS. The measured minimum of 63 FPS at Medium ensures that frame pacing remains stable, avoiding noticeable stutter.

In summary, the data suggests that users should favor Medium settings at 4K for the best balance of visual quality and playability, while at 1440p, High offers a good compromise with 81 FPS. At 1080p, the choice is less critical, but Medium at 100 FPS provides a solid experience without sacrificing too much visual fidelity. Ultra settings are generally not worth the performance cost, as the gains over High are negligible in most resolutions.

Measured FPS Breakdown

At 1920x1080, the measured averages are as follows: Low settings produce 112 FPS, Medium produces 100 FPS with a minimum of 85 and a maximum of 115, High produces 89 FPS, and Ultra produces 88 FPS. The spread between Low and Ultra is 24 FPS, which is relatively narrow and indicates that the CPU is the primary limiter at this resolution.

At 2560x1440, the results show Low at 101 FPS, Medium at 90 FPS with a minimum of 77 and a maximum of 104, High at 81 FPS, and Ultra at 79 FPS. The difference between Low and Ultra shrinks to 22 FPS, and the frame rates remain tightly clustered, reinforcing the CPU-bound nature of the system at this resolution.

At 3840x2160, the frame rates finally diverge more significantly. Low achieves 88 FPS, Medium drops to 74 FPS with a minimum of 63 and a maximum of 86, High falls to 55 FPS, and Ultra bottoms out at 52 FPS. The gap between Low and Ultra expands to 36 FPS, showing that the GPU is becoming more engaged as resolution increases. The Medium preset's minimum of 63 FPS is notable, as it indicates that even at 4K, the system can maintain a playable frame rate without dipping below 60 FPS.

The data reveals that the Medium preset is the only configuration at 4K that provides both a minimum and average above 60 FPS. At 1440p, all presets exceed 60 FPS, with the lowest average being Ultra at 79 FPS. At 1080p, every preset exceeds 85 FPS, with Low breaking the 100 FPS barrier. These numbers paint a clear picture of a system that is comfortable at lower resolutions but struggles to leverage the GPU's full potential at any resolution.

CPU Role

The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture, built on Intel's 10 nm process. It has a base clock of 3.30 GHz and a boost clock of 4.30 GHz, with a TDP of 58 W. The cache hierarchy includes 80 KB of L1 per core, 1.25 MB of L2 per core, and 12 MB of shared L3 cache. This is a modest configuration for a modern CPU, particularly when paired with a flagship GPU.

In synthetic benchmarks, the i3-12100F shows its strengths and weaknesses. Its single-thread performance is decent, with a 3DMark single-thread score of 893 and a Cinebench R23 single-core score of 1,674. Multi-threaded scores, however, reveal its limitations: Cinebench R23 multicore yields 11,860, and Geekbench multicore produces 7,252. The 3DMark max-threads score of 4,023 is barely higher than the 8-thread score of 4,026, indicating that the processor's four physical cores are saturated quickly.

The impact on Cyberpunk 2077 is profound. The game is known for its demanding CPU requirements, particularly in crowded city scenes where draw calls and physics calculations pile up. The i3-12100F's four cores are insufficient to maintain a high instruction rate, which explains why the RTX 4090 cannot reach its potential. Even at 1080p Low, the system only achieves 112 FPS, a figure that many mid-range GPUs could match with a stronger CPU.

The processor's memory support for DDR4 and DDR5 is dual-channel, but the lack of a stated memory bandwidth figure means we cannot quantify how memory throughput affects results. The PCIe Gen 5 support with 16 lanes (CPU only) is future-proof, but in this configuration, the GPU uses PCIe 4.0, so the extra bandwidth is not utilized. The CPU's 68th percentile ranking among all CPUs underscores that it is an entry-level part, and its nearest rivals are all similarly positioned, with deltas of less than 1.1% in average benchmark score.

In summary, the i3-12100F is the clear bottleneck in this combo. Its 4-core/8-thread design and 12 MB of L3 cache are simply not enough to drive an RTX 4090 in a CPU-intensive title like Cyberpunk 2077. The benchmark results show that upgrading the CPU would yield significant frame rate gains across all resolutions and settings, as the GPU has ample headroom that is currently being wasted.

Hardware Specifications

Intel Core i3-12100F

Cores / Threads 4 / 8
Base Clock 3300 MHz
Boost Clock 4300 MHz
TDP 58W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 4090

VRAM 24 GB GDDR6X
Base Clock —
Boost Clock 2520 MHz MHz
TDP 450 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 4090 in Cyberpunk 2077

Resolution Settings Avg FPS
3840x2160 Low 88.0
3840x2160 Medium 74.0
3840x2160 High 55.0
3840x2160 Ultra 52.0
2560x1440 Low 101.0
2560x1440 Medium 90.0
2560x1440 High 81.0
2560x1440 Ultra 79.0
1920x1080 Low 112.0
1920x1080 Medium 100.0
1920x1080 High 89.0
1920x1080 Ultra 88.0

Cyberpunk 2077 with ii3-12100F + Other GPUs

See how Cyberpunk 2077 performs with the same CPU but different graphics cards.

Cyberpunk 2077 with RTX 4090 + Other CPUs

See how Cyberpunk 2077 performs with the same GPU but different processors.

Other Games with ii3-12100F + RTX 4090

Explore FPS benchmarks for other games using this same hardware combination.