Control

Control

AVERAGE FPS
88
good

This combination provides smooth gameplay with an average of 88 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 52 59 83
1440p QHD 67 77 87 123
1080p Full HD 89 102 115 162

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 83
3840x2160 Medium 59
3840x2160 High 52
3840x2160 Ultra 45
2560x1440 Low 123
2560x1440 Medium 87
2560x1440 High 77
2560x1440 Ultra 67
1920x1080 Low 162
1920x1080 Medium 115
1920x1080 High 102
1920x1080 Ultra 89

Control with AMD Ryzen 5 5600F + NVIDIA GeForce RTX 4060 Ti 8 GB, In-Depth Analysis

Control is a demanding Action Adventure title that stresses both the CPU and GPU, and the AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 4060 Ti 8 GB delivers a solid, if not spectacular, experience. The data shows a combo that is firmly capable of high-refresh-rate 1080p gaming and playable 1440p, but it begins to buckle under the weight of 4K resolution. This analysis breaks down the measured performance across all settings and resolutions, placing the combo’s rank against 2,888 other tested configurations.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer, and built on TSMC's 7 nm process. It operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz, featuring a total of 32 MB of shared L3 cache. This is a modern desktop CPU from the 5000 series, released in September 2025, and its performance profile is well-suited for gaming. The benchmark data indicates a Passmark single-thread score of 2,872 and a multithread score of 19,236, which places the processor in the 85th percentile of all CPUs tested.

In the context of Control, the CPU's role is to feed the GPU with draw calls and manage the game's physics and AI. The 5600F’s strong single-thread performance is critical here, as the game's engine is known to be sensitive to single-core speed. The measured results suggest the processor is not a bottleneck at lower resolutions; at 1080p with Low settings, the combo achieves 162 FPS, which indicates the CPU can push frames well beyond the 144 Hz refresh rate that many gamers target. However, the data also reveals that the CPU's headroom is finite. When comparing the CPU to its nearest rivals based on average benchmark scores, the Ryzen 5 5600F is essentially tied with the Intel Core Ultra 5 225, scoring 36,945 versus 36,938, a delta of 0%. It is also within 0.5% of the AMD Ryzen 5 5500X3D and the Intel Core i9-12900T, showing that its raw compute power is highly competitive in its class. For Control, this means the 5600F provides a very stable platform, ensuring that frame pacing remains consistent in CPU-bound scenarios, though it will not be the component that pushes frame rates to the extreme limits at lower settings.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured FPS data provides a clear picture of how the settings presets scale performance. At 1080p, the jump from Low to Medium is significant, dropping from 162 FPS to 115 FPS. The move from Medium to High further reduces the average to 102 FPS, and finally, Ultra brings it down to 89 FPS. For players with a 144 Hz monitor, the Low preset is the only one that can fully saturate the refresh rate, but the visual compromise is substantial. The sweet spot for 1080p is the High preset, which delivers 102 FPS. This is a 37% drop from Low but offers a vastly improved visual experience. The Ultra preset, at 89 FPS, is still smooth but represents a 13% performance hit over High for what is often a marginal visual gain in this title.

At 1440p, the same pattern emerges. Low settings yield 123 FPS, dropping to 87 FPS at Medium, 77 FPS at High, and 67 FPS at Ultra. Here, the High preset is again the recommended choice, providing a playable 77 FPS that is well-suited for a 60-75 Hz monitor. The Medium preset at 87 FPS is also a strong contender for those who prioritize higher frame rates over the extra visual fidelity of High. The Ultra preset at 67 FPS is playable but pushes the system close to the 60 FPS threshold, which can feel less fluid in a fast-paced action game. At 4K, the situation changes dramatically. The High preset manages 52 FPS, which is borderline playable but not ideal. The Medium preset offers 59 FPS, and Low is the only option that breaches the 60 FPS barrier, hitting 83 FPS. For 4K, the data suggests that the Low preset is the only way to achieve a consistent 60+ FPS experience, while Medium is the highest visual setting that remains mostly smooth, with a min FPS of 50 recorded.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The scaling of frame rates across resolutions is a textbook example of GPU-bound performance. At High settings, the average FPS drops from 102 at 1080p to 77 at 1440p, a 24.5% decrease. Moving to 4K, the average falls further to 52 FPS, a 32.5% drop from 1440p and a 49% drop from 1080p. This steep decline indicates that the NVIDIA GeForce RTX 4060 Ti 8 GB is the primary limiting factor as resolution increases. The GPU’s memory bandwidth of 288.0 GB/s and its 128-bit bus width become strained when rendering the increased pixel count of 4K, leading to the significant performance penalty.

This conclusion is reinforced by the modest performance deltas at lower resolutions. The difference between 1080p and 1440p is noticeable, but not as severe, suggesting that the Ryzen 5 5600F is still able to keep the GPU adequately fed. However, the massive drop when hitting 4K shows that the RTX 4060 Ti simply does not have the raw compute power or memory bandwidth to handle Control’s high-resolution textures and effects without sacrificing frame rate. The measured data shows that scaling from 1080p to 4K at High settings results in a 50 FPS average reduction. This is a clear indicator that for 4K gaming, the GPU is the definitive bottleneck, and users would need to significantly lower settings or rely on upscaling technologies to achieve higher frame rates, though no such technologies are measured in this data set.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combined performance of the Ryzen 5 5600F and the RTX 4060 Ti 8 GB places this configuration in the 1036th position out of 2,888 tested combos for Control. This places it in the top 36% of all systems tested, which is a respectable showing for a mid-range desktop setup. The rank indicates that while this combo is not a top-tier performer, it significantly outperforms the majority of the hardware combinations in the database. The data suggests that this is a very balanced pairing, where neither component is drastically holding the other back at typical gaming resolutions.

This rank of 1036 out of 2888 puts the system in the upper-middle tier of performance. It is well ahead of older or lower-end hardware, but it is also clearly behind combinations that utilize higher-end CPUs and GPUs, such as those with more powerful graphics cards or processors with higher core counts. The GPU's percentile ranking of 19th percent vs all GPUs is interesting, as it shows that while the GPU has a low average benchmark score relative to all other GPUs, the combo itself performs well in this specific game, indicating that Control is not an outlier that unfairly penalizes this hardware. The rank reflects the real-world playability of this setup, confirming that it is a competent gaming machine for 1080p and 1440p, even if it falls short of the high-end 4K experience.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4060 Ti 8 GB is built on the Ada Lovelace architecture and features 4,352 shading units, 136 texture mapping units, and 48 raster output units. It operates at a base clock of 2310 MHz and a boost clock of 2535 MHz. The card is equipped with 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 288.0 GB/s. The GPU’s performance in this game is heavily influenced by its memory subsystem and raw compute throughput. In Control, which is a visually rich game with complex lighting and particle effects, the GPU is the primary determinant of frame rate, especially at higher resolutions.

The 8 GB VRAM is sufficient for 1080p and 1440p gameplay at the measured settings, as the frame times remain stable. However, the data suggests that at 4K, the GPU's 8 GB memory pool may be a limiting factor, as the system's performance drops significantly. The GPU's 22.06 TFLOPS of FP32 compute power is substantial, but it appears to be insufficient for the demands of 4K rendering in this title. The trio of nearest rivals, including the RTX 4060 Ti 16 GB, shows a delta of just 0.2%, indicating that the extra VRAM of the 16 GB version does not translate to a significant performance advantage in the 3DMark Steel Nomad test, but the actual game data might tell a different story at 4K. The 8 GB card’s performance in Control is characterized by strong 1080p and 1440p results, with a clear wall hit at 4K where the pixel throughput demand exceeds the card's capabilities.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The following data provides the exact measured average FPS for each resolution and settings preset. All data points are from the provided fact pack.

1920x1080:

  • Low: 162 FPS average.
  • Medium: 115 FPS average, with a minimum of 98 FPS and a maximum of 132 FPS.
  • High: 102 FPS average.
  • Ultra: 89 FPS average.

2560x1440:

  • Low: 123 FPS average.
  • Medium: 87 FPS average, with a minimum of 74 FPS and a maximum of 100 FPS.
  • High: 77 FPS average.
  • Ultra: 67 FPS average.

3840x2160:

  • Low: 83 FPS average.
  • Medium: 59 FPS average, with a minimum of 50 FPS and a maximum of 68 FPS.
  • High: 52 FPS average.
  • Ultra: 45 FPS average.

The data reveals a consistent pattern. At 1080p, the system is capable of delivering high frame rates across all presets, with even the demanding Ultra preset achieving a smooth 89 FPS. The 1440p results show a step down, but the High preset at 77 FPS remains very playable. At 4K, the performance falls off a cliff. The Medium preset, with a min FPS of 50, is the highest setting that can maintain a mostly stable experience, while Low is the only preset that averages above 60 FPS. The Ultra preset at 4K, with 45 FPS, is the worst-case scenario and is not recommended for a responsive gameplay experience. The presence of min/max data for the Medium preset at all resolutions indicates that this setting can cause frame time spikes, which might be perceptible as stutter in fast action sequences.

Hardware Specifications

AMD Ryzen 5 5600F

Cores / Threads 6 / 12
Base Clock 3000 MHz
Boost Clock 4000 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4060 Ti 8 GB

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2535 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600F + NVIDIA GeForce RTX 4060 Ti 8 GB in Control

Resolution Settings Avg FPS
3840x2160 Low 83.0
3840x2160 Medium 59.0
3840x2160 High 52.0
3840x2160 Ultra 45.0
2560x1440 Low 123.0
2560x1440 Medium 87.0
2560x1440 High 77.0
2560x1440 Ultra 67.0
1920x1080 Low 162.0
1920x1080 Medium 115.0
1920x1080 High 102.0
1920x1080 Ultra 89.0

Control with RTX 4060 Ti 8 GB + Other CPUs

See how Control performs with the same GPU but different processors.

Other Games with Ryzen 5 5600F + RTX 4060 Ti 8 GB

Explore FPS benchmarks for other games using this same hardware combination.