Control

Control

AVERAGE FPS
89
good

This combination provides smooth gameplay with an average of 89 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 47 53 60 84
1440p QHD 67 80 90 123
1080p Full HD 91 102 118 147

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 84
3840x2160 Medium 60
3840x2160 High 53
3840x2160 Ultra 47
2560x1440 Low 123
2560x1440 Medium 90
2560x1440 High 80
2560x1440 Ultra 67
1920x1080 Low 147
1920x1080 Medium 118
1920x1080 High 102
1920x1080 Ultra 91

Control with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060 Ti 8 GB, In-Depth Analysis

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 4060 Ti 8 GB presents a specific performance profile in Control, a 2019 action-adventure title. The measured data shows this combination ranks 689th out of 1636 tested configurations, placing it in the upper-middle tier of systems. The following analysis breaks down the benchmark results across resolutions and settings, focusing on what the numbers indicate about the balance between the CPU and GPU.

Resolution Scaling

The frame rate data reveals how the workload shifts as resolution increases. At 1920x1080 with Low settings, the system produces an average of 146.9 FPS. Moving to 2560x1440 at the same Low preset drops performance to 122.6 FPS, a reduction of 24.3 FPS. At 3840x2160, the Low preset falls to 84.3 FPS, which is a 38.3 FPS drop from the 1440p result. The scaling from 1080p to 4K at Low settings represents a total loss of 62.6 FPS, or roughly 42.6% of the 1080p score.

This scaling pattern becomes more pronounced at higher settings. With the High preset, the system delivers 102.3 FPS at 1080p, 80.3 FPS at 1440p, and 52.9 FPS at 4K. The gap between 1080p and 4K at High is 49.4 FPS. The Ultra preset shows the steepest drop: 91.3 FPS at 1080p, 67.4 FPS at 1440p, and 47.2 FPS at 4K. The difference between 1080p Ultra and 4K Ultra is 44.1 FPS.

The data suggests the GPU becomes the limiting component as resolution increases, since the frame rate drops are substantial when pixel count rises. At 1080p Low, the 146.9 FPS result indicates the CPU is likely holding the system back from even higher frame rates, given the RTX 4060 Ti's capabilities. At 4K Ultra, the 47.2 FPS average shows the GPU is heavily taxed by the combination of high resolution and demanding settings. The scaling from 1440p to 4K is particularly telling: at Low settings, this transition costs 38.3 FPS, while at Ultra it costs 20.2 FPS, suggesting the GPU is saturated at 4K Ultra and the CPU bottleneck diminishes.

Settings Recommendations

The measured rows allow a direct comparison of the four available presets. At 1080p, the Low preset achieves 146.9 FPS, Medium reaches 117.7 FPS, High produces 102.3 FPS, and Ultra delivers 91.3 FPS. The jump from Low to Medium costs 29.2 FPS, while the jump from High to Ultra only costs 11.0 FPS. This suggests that the difference between High and Ultra at 1080p is relatively minor in performance terms, making High a reasonable compromise.

At 1440p, the spread is similar but compressed: Low hits 122.6 FPS, Medium 89.7 FPS, High 80.3 FPS, and Ultra 67.4 FPS. The difference between Medium and High here is 9.4 FPS, while the gap between High and Ultra is 12.9 FPS. At 4K, the presets yield 84.3 FPS (Low), 59.8 FPS (Medium), 52.9 FPS (High), and 47.2 FPS (Ultra). The 4K Low result is notably higher than the 4K Medium score by 24.5 FPS, indicating a significant performance cost for enabling even Medium settings at this resolution.

For a smooth experience, the data points to High settings at 1080p as the most balanced choice, since it stays above 100 FPS. At 1440p, Medium maintains 89.7 FPS, which is closer to the 90 FPS mark. At 4K, only Low achieves a playable average above 60 FPS. The Ultra preset, while visually most demanding, delivers 91.3 FPS at 1080p, which is still smooth, but the 67.4 FPS at 1440p and 47.2 FPS at 4K make it less practical at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 4060 Ti 8 GB is built on the Ada Lovelace architecture with a 5 nm process. Its base clock is 2310 MHz, boosting to 2535 MHz. The memory configuration consists of 8 GB of GDDR6 on a 128-bit bus, providing 288.0 GB/s of bandwidth. The card has 4352 shading units, 136 texture mapping units, and 48 render output units.

The VRAM capacity and bandwidth directly relate to the measured results. The 8 GB frame buffer is sufficient for Control at 1080p and 1440p across all settings, as evidenced by the playable frame rates. At 4K, the memory bandwidth of 288.0 GB/s becomes a limiting factor, particularly with higher settings that increase texture data. The 4K Ultra result of 47.2 FPS suggests the GPU is constrained by both compute throughput and memory bandwidth.

The GPU's benchmark score in 3DMark Steel Nomad DX12 is 2913, with a percentile rank of 17 among all GPUs. This low percentile indicates that the RTX 4060 Ti 8 GB is not a top-tier performer in synthetic benchmarks, which aligns with its measured performance in Control. The nearest rivals include the NVIDIA GeForce GT 555M at an identical score of 2913 with a 0% delta, and the RTX 4060 Ti 16 GB at 2907 with a 0.2% delta. The GTX 860M scores 2959 with a -1.5% delta, showing the RTX 4060 Ti 8 GB is slightly slower than that older mobile chip in this specific test.

The GPU's pixel rate of 121.7 GPixel/s and texture rate of 344.8 GTexel/s contribute to its ability to handle the visual effects in Control. The FP32 throughput of 22.06 TFLOPS supports the game's physics and particle systems. However, the 128-bit memory bus is a notable constraint, as the 288.0 GB/s bandwidth must serve a game that scales heavily with resolution.

Measured FPS Breakdown

At 1920x1080, the system produces a full range of playable results. The Low preset averages 146.9 FPS, which is the highest score in the entire dataset. Medium settings drop this to 117.7 FPS, a 29.2 FPS reduction. High settings yield 102.3 FPS, and Ultra brings the average to 91.3 FPS. The spread from Low to Ultra at 1080p is 55.6 FPS, showing a wide performance envelope.

At 2560x1440, the same pattern emerges with lower absolute numbers. Low settings achieve 122.6 FPS, Medium 89.7 FPS, High 80.3 FPS, and Ultra 67.4 FPS. The difference between Low and Medium at 1440p is 32.9 FPS, which is larger than the 1080p gap of 29.2 FPS. This indicates that Medium settings at 1440p impose a proportionally heavier load on the GPU.

At 3840x2160, the results show a significant performance cliff. Low settings still manage 84.3 FPS, which is surprisingly high for 4K. Medium drops to 59.8 FPS, High to 52.9 FPS, and Ultra to 47.2 FPS. The transition from Low to Medium at 4K costs 24.5 FPS, the largest single-setting drop in the dataset. The 4K Ultra result of 47.2 FPS is the lowest measured value, representing just 32.1% of the 1080p Low score.

The data shows consistent scaling across resolutions. At each resolution, the Ultra preset is slower than High by roughly 9-12 FPS. The Low preset is always significantly faster than Medium, with the gap widening at higher resolutions. The system never drops below 47 FPS in any tested configuration, which means it remains playable throughout, though 4K Ultra is borderline.

FAQ

*Q: What is the best resolution for this CPU-GPU combo in Control?*

A: The data indicates 1920x1080 is the strongest resolution, with all presets above 90 FPS. At 2560x1440, only Low and Medium stay above 89 FPS, while 3840x2160 sees Low at 84.3 FPS and Ultra at 47.2 FPS.

Q: How much performance is lost when moving from 1080p to 4K at High settings?

A: The High preset drops from 102.3 FPS at 1080p to 52.9 FPS at 4K, a reduction of 49.4 FPS. This represents a 48.3% decrease in average frame rate.

Q: Is the RTX 4060 Ti 8 GB a high-performing GPU in synthetic tests?

A: No. Its 3DMark Steel Nomad DX12 score of 2913 places it in the 17th percentile among all GPUs, with nearest rivals including the GT 555M at the same score and the GTX 860M at 2959.

Q: Which settings preset at 1440p provides the best balance of quality and speed?

A: Medium settings at 1440p achieve 89.7 FPS, while High drops to 80.3 FPS. The Medium preset stays closer to 90 FPS, making it a reasonable choice for maintaining smooth motion.

Q: Does the CPU bottleneck the GPU at 1080p Low settings?

A: The 146.9 FPS result at 1080p Low is the highest in the dataset, but the RTX 4060 Ti could potentially push higher. The Ryzen 5 2600's 6 cores and 12 threads with a boost clock of 3.90 GHz likely limit the maximum frame rate in this scenario.

Q: How does the RTX 4060 Ti 8 GB compare to its 16 GB variant in this game's context?

A: In the 3DMark Steel Nomad test, the 8 GB model scores 2913, which is 0.2% higher than the 16 GB version's 2907. The measured Control results use the 8 GB card, showing it handles all presets without exceeding the VRAM capacity.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, built on the Zen architecture with a 12 nm process. Its base clock is 3.40 GHz, boosting to 3.90 GHz. The CPU has a 16 MB shared L3 cache and supports DDR4 memory with dual-channel bandwidth of 46.9 GB/s. Its TDP is 65 watts.

The CPU's benchmark results provide context for its role in Control. In Cinebench R23, it scores 11186 points in multi-core and 1579 points in single-core. The PassMark multithread score is 13160, with a single-thread score of 2239. These scores place the Ryzen 5 2600 in the 77th percentile among all CPUs, with an average benchmark score of 19616. Its nearest rivals include the Intel Core i5-1345U at 19691 (-0.4% delta) and the AMD Ryzen 5 7530U at 19508 (0.6% delta).

In Control, the CPU's impact is visible in the frame rate scaling. At 1080p Low, the 146.9 FPS result suggests the CPU is keeping up with the GPU's output, but the 6-core, 12-thread configuration may not be fully optimized for the game's engine. The single-core score of 1579 in Cinebench R23 indicates modest per-core performance, which could limit frame rates in scenes with heavy physics calculations. The multi-core score of 11186 shows the CPU can handle parallel workloads, which helps with the game's environmental interactions.

The CPU's memory bandwidth of 46.9 GB/s is lower than what newer platforms offer, but it does not appear to bottleneck the GPU in the measured results. The 4K Ultra score of 47.2 FPS is clearly GPU-limited, as the CPU would not be the primary constraint at such high pixel counts. The 1080p Low score of 146.9 FPS is the only result where the CPU might be the limiting factor, since the GPU is capable of higher frame rates at lower resolutions. The overall combo rank of 689 out of 1636 reflects a balanced pairing, where neither component drastically outperforms the other in this game.

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4060 Ti 8 GB

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2535 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060 Ti 8 GB in Control

Resolution Settings Avg FPS
3840x2160 Low 84.3
3840x2160 Medium 59.8
3840x2160 High 52.9
3840x2160 Ultra 47.2
2560x1440 Low 122.6
2560x1440 Medium 89.7
2560x1440 High 80.3
2560x1440 Ultra 67.4
1920x1080 Low 146.9
1920x1080 Medium 117.7
1920x1080 High 102.3
1920x1080 Ultra 91.3

Control with RTX 4060 Ti 8 GB + Other CPUs

See how Control performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + RTX 4060 Ti 8 GB

Explore FPS benchmarks for other games using this same hardware combination.