Barony

Barony

AVERAGE FPS
339
excellent

This combination delivers exceptional performance with an average of 339 FPS, perfect for high refresh rate gaming and competitive play.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 110 154 179 242
1440p QHD 211 295 343 461
1080p Full HD 335 467 542 723

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Ultra 110
3840x2160 High 154
3840x2160 Medium 179
3840x2160 Low 242
2560x1440 Ultra 211
2560x1440 High 295
2560x1440 Medium 343
2560x1440 Low 461
1920x1080 Ultra 335
1920x1080 High 467
1920x1080 Medium 542
1920x1080 Low 723

Barony with Intel Core Ultra 9 275HX + NVIDIA GeForce RTX 5090, In-Depth Analysis

# Barony with Intel Core Ultra 9 275HX + NVIDIA GeForce RTX 5090

The combination of Intel's Core Ultra 9 275HX and NVIDIA's GeForce RTX 5090 produces a Barony experience that scales predictably across resolutions, with the 24-core Arrow Lake-HX processor and Blackwell-based flagship GPU delivering frame rates that range from playable at 4K Ultra to extraordinary at 1080p Low. Measured data shows this combo ranking 596th out of 2,935 tested configurations, placing it well within the top 20% of all systems evaluated for this roguelike title.

Resolution Scaling

The performance trajectory from 1080p to 4K reveals a system that is heavily GPU-bound at lower resolutions and increasingly constrained by graphics workload as pixel count rises. At 1080p High settings, the combo produces 315 FPS average, but dropping to Low settings pushes that figure to 493 FPS — a 56.5% improvement that demonstrates the RTX 5090's headroom when pixel throughput is minimal. The gap between High and Low at 1080p is substantial, suggesting that CPU-side game logic and rendering calls are not the limiting factor at this resolution; the GPU has ample capacity to render frames faster than the engine can feed it.

Moving to 1440p, the same settings spread shows 311 FPS at Low and 199 FPS at High, with Medium landing at 231 FPS. The reduction from 1080p Low to 1440p Low is 182 FPS, a 36.9% drop that indicates the GPU is beginning to feel the additional pixel workload. However, the fact that 1440p Low still exceeds 300 FPS confirms that this pairing remains overwhelmingly capable at this resolution, with the RTX 5090's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth providing no visible bottleneck.

At 4K, the scaling becomes more pronounced. Low settings yield 163 FPS average, High drops to 104 FPS, and Ultra falls to 74 FPS. The jump from 1440p Ultra (142 FPS) to 4K Ultra (74 FPS) represents a 47.9% decrease, highlighting the quadratic growth in pixel count from 3.7 million to 8.3 million pixels. The 4K Medium result of 121 FPS with a minimum of 103 and maximum of 139 shows tighter frame pacing than the High or Ultra presets, which lack recorded min/max values in the measured data.

The scaling pattern indicates that Barony's rendering load grows predictably with resolution, and the RTX 5090's 104.8 TFLOPS FP32 throughput is the dominant factor at 4K. At 1080p, the CPU's role becomes more visible — the Core Ultra 9 275HX boosts to 5.40 GHz and maintains high single-thread performance, which is critical for maintaining those 400+ FPS figures without stutter.

CPU Role

The Intel Core Ultra 9 275HX brings 24 cores and 24 threads to the table, operating at a 2.70 GHz base clock with a 5.40 GHz boost. This Arrow Lake-HX processor, built on TSMC's 3 nm process, achieves a Cinebench R23 multi-core score of 35,589 and a single-core score of 2,204. In Barony, a roguelike that emphasizes procedural generation and simulation, the CPU's ability to handle game logic, pathfinding, and entity updates is paramount.

Benchmark results place this CPU at the 94th percentile among all processors, with an average benchmark score of 67,469. Its nearest rivals in aggregate performance include the Intel Xeon w5-3525 (0.3% ahead), AMD EPYC 4484PX (0.5% ahead), and AMD Ryzen Threadripper PRO 5955WX (0.6% ahead), while the Intel Xeon 6515P trails by 0.7%. This clustering suggests the 275HX sits in a performance tier where small percentage differences separate top-tier workstation and enthusiast parts.

In Barony specifically, the CPU's impact is most evident at 1080p Low where the 493 FPS average approaches the practical ceiling for game engine frame delivery. The 24 threads allow for efficient distribution of game systems across cores, while the 36 MB of shared L3 cache reduces memory latency for frequently accessed game state data. The dual-channel DDR5 memory interface provides 102.4 GB/s of bandwidth, which is sufficient for this roguelike's modest memory footprint.

The single-thread performance, evidenced by a Geekbench single-core score of 2,458 and Passmark single-thread score of 4,713, is crucial for Barony's turn-based and real-time hybrid gameplay. The boost clock of 5.40 GHz ensures that the primary game thread can execute quickly, while the 24 cores handle background simulation tasks without contention. The 55 W TDP reflects an efficient design that maintains high clocks without excessive power draw.

FAQ

Q: What is the best resolution to play Barony with this hardware?

A: The data shows that 1440p provides the best balance of visual fidelity and performance. At 1440p High, the combo delivers 199 FPS average, while 4K High drops to 104 FPS. The 1440p Medium preset offers 231 FPS with a minimum of 197 FPS, ensuring smooth gameplay without the pixel density demands of 4K.

Q: How does the RTX 5090 compare to other GPUs in this system's benchmark results?

A: The RTX 5090 scores 39,650 in Passmark G3D and 18,355 in 3DMark Steel Nomad DX12, placing it at the 92nd percentile of all GPUs. Its nearest rivals are the NVIDIA Tesla P100 PCIe 16 GB (0.3% ahead), Tesla P100 PCIe 12 GB (0.6% ahead), and AMD Radeon RX 6850M XT (1.1% ahead), while the AMD Radeon Pro Vega 64X trails by 1.4%.

Q: Does Barony benefit more from the CPU or GPU in this configuration?

A: At 1080p, the CPU's 24 cores and 5.40 GHz boost clock are the primary drivers, as evidenced by 493 FPS at Low settings. At 4K, the GPU becomes the limiting factor, with Ultra settings producing only 74 FPS. The transition point appears between 1440p and 4K, where the GPU's pixel throughput becomes the bottleneck.

Q: What frame rates can I expect at 4K with different quality presets?

A: The measured data shows 4K Low at 163 FPS, 4K Medium at 121 FPS (with min/max of 103/139), 4K High at 104 FPS, and 4K Ultra at 74 FPS. The Medium preset offers the most consistent frame pacing with a recorded minimum above 100 FPS.

Q: How does this combo rank among all tested configurations for Barony?

A: This combination ranks 596th out of 2,935 tested combos, placing it in the 79.7th percentile of all systems evaluated. This indicates it outperforms approximately 80% of configurations tested for this game.

Q: Is the 32 GB of VRAM in the RTX 5090 necessary for Barony?

A: Barony is a roguelike that does not require large texture memory, so the 32 GB GDDR7 allocation is more than sufficient. The 1.79 TB/s memory bandwidth ensures that any texture streaming or asset loading is handled without delay, but the game itself is unlikely to stress the memory capacity.

How This Combo Ranks

The 596th rank out of 2,935 tested combos places this system in the upper quintile of all configurations evaluated for Barony. This position reflects the balance between the Core Ultra 9 275HX's strong single-thread performance and the RTX 5090's massive graphics throughput. The CPU's 94th percentile ranking among all processors and the GPU's 92nd percentile ranking among all GPUs combine to produce a system that is well-matched for this title.

The rank suggests that while this combo is not the absolute fastest for Barony — likely due to the game's relatively simple graphics demands that favor high-frequency CPUs over massive GPUs — it still delivers frame rates that exceed display refresh rates at all resolutions below 4K Ultra. The 1080p Low result of 493 FPS indicates the system is pushing against engine-level frame delivery limits rather than hardware constraints.

Compared to the CPU's nearest rivals in aggregate benchmark scores, the 275HX sits within 0.7% of the Xeon w5-3525, EPYC 4484PX, and Threadripper PRO 5955WX. These small differences in synthetic benchmarks translate to negligible real-world impact in Barony, where the CPU's boost clock and cache hierarchy matter more than raw multi-threaded throughput. The GPU's nearest rivals in benchmark scores are workstation-class Tesla parts that do not represent typical gaming hardware, further emphasizing the RTX 5090's dominant position.

Settings Recommendations

For players seeking the optimal experience, the 1440p Medium preset stands out as the best measured configuration. It delivers 231 FPS average with a minimum of 197 FPS and maximum of 266 FPS, providing a 69 FPS headroom above the minimum that ensures smooth frame delivery even during intense roguelike encounters with numerous entities on screen. The frame pacing consistency at this setting is superior to other presets, as evidenced by the recorded min/max values.

At 4K, the Medium preset is the recommended choice, offering 121 FPS average with a minimum of 103 FPS. This maintains above-100 FPS at all times, which is critical for a game where reaction time can determine survival. The 4K High preset's 104 FPS average comes close but lacks the recorded minimum to confirm consistent frame delivery, and the 4K Ultra preset's 74 FPS average may introduce perceptible stutter during busy scenes.

For competitive play or maximum frame rates, 1080p Low at 493 FPS is the peak measured performance. However, this sacrifices visual quality for frame rates far beyond what most displays can show. The 1080p High preset at 315 FPS provides a more balanced experience, and the 1080p Medium preset at 366 FPS with a minimum of 312 FPS offers excellent consistency for high-refresh-rate monitors.

The 1440p High preset at 199 FPS is suitable for 144Hz or 165Hz displays, while 1440p Ultra at 142 FPS still exceeds 120Hz refresh rates. For 4K displays with 120Hz or higher refresh rates, the Medium preset is the only measured option that consistently exceeds 100 FPS, making it the recommended choice for 4K gaming.

Measured FPS Breakdown

At 1920x1080, the measured results show a clear progression across settings. Low settings produce 493 FPS average, Medium yields 366 FPS with a minimum of 312 and maximum of 421, High delivers 315 FPS, and Ultra drops to 226 FPS. The spread from Low to Ultra is 267 FPS, representing a 54.2% reduction in frame rate when maximizing visual quality. The Medium preset's minimum of 312 FPS indicates that even under heavy load, the system maintains frame rates above 300 FPS at this resolution.

At 2560x1440, performance remains exceptionally high. Low settings achieve 311 FPS average, Medium delivers 231 FPS with a minimum of 197 and maximum of 266, High reaches 199 FPS, and Ultra produces 142 FPS. The reduction from 1080p to 1440p is consistent across settings, with Low dropping by 182 FPS (36.9%), Medium by 135 FPS (36.9%), High by 116 FPS (36.8%), and Ultra by 84 FPS (37.2%). This uniformity indicates that the scaling is purely resolution-driven without unexpected bottlenecks.

At 3840x2160, the frame rates become more modest but remain highly playable. Low settings yield 163 FPS average, Medium produces 121 FPS with a minimum of 103 and maximum of 139, High achieves 104 FPS, and Ultra falls to 74 FPS. The transition from 1440p to 4K shows a more dramatic drop, with Low decreasing by 148 FPS (47.6%), Medium by 110 FPS (47.6%), High by 95 FPS (47.7%), and Ultra by 68 FPS (47.9%). This consistent percentage reduction across all settings reinforces that the 4K resolution workload is the primary performance determinant at this level.

The Medium preset at each resolution includes recorded minimum and maximum values, providing insight into frame pacing. At 1080p, the range from minimum to maximum is 109 FPS (312 to 421), at 1440p it is 69 FPS (197 to 266), and at 4K it is 36 FPS (103 to 139). This narrowing range at higher resolutions indicates that the GPU workload becomes more consistent as pixel count increases, reducing the variance between light and heavy scenes. The 4K Medium preset's minimum of 103 FPS is particularly noteworthy, as it suggests the system rarely dips below 100 FPS even during demanding moments.

Hardware Specifications

Intel Core Ultra 9 275HX

Cores / Threads 24 / 24
Base Clock 2700 MHz
Boost Clock 5400 MHz
TDP 55W
Socket Intel BGA 2114
View Full CPU Details →

NVIDIA GeForce RTX 5090

VRAM 32 GB GDDR7
Base Clock —
Boost Clock 2407 MHz MHz
TDP 575 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 275HX + NVIDIA GeForce RTX 5090 in Barony

Resolution Settings Avg FPS
3840x2160 Ultra 110.0
3840x2160 High 154.0
3840x2160 Medium 179.0
3840x2160 Low 242.0
2560x1440 Ultra 211.0
2560x1440 High 295.0
2560x1440 Medium 343.0
2560x1440 Low 461.0
1920x1080 Ultra 335.0
1920x1080 High 467.0
1920x1080 Medium 542.0
1920x1080 Low 723.0

Barony with iUltra 9 275HX + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with RTX 5090 + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with iUltra 9 275HX + RTX 5090

Explore FPS benchmarks for other games using this same hardware combination.