Barony
This combination delivers exceptional performance with an average of 262 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 85 | 119 | 139 | 186 |
| 1440p QHD | 163 | 228 | 265 | 356 |
| 1080p Full HD | 258 | 361 | 420 | 565 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with Intel Core i9-14900K + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
The Intel Core i9-14900K and NVIDIA GeForce RTX 5070 Ti combination produces an exceptionally high-performance result in Barony, with the measured frame rates indicating a system that is overwhelmingly GPU-limited at higher resolutions but capable of extreme CPU-bound throughput at 1080p. The data shows a clear hierarchy where the graphics card becomes the primary constraint as resolution increases, while the processor’s 24 cores and high clock speeds provide a massive headroom that is only fully utilized at lower settings.
Resolution Scaling
The measured FPS data reveals a classic performance curve that shifts from CPU-bound behavior at 1080p to GPU-bound behavior at 4K. At 1920x1080 with Low settings, the system achieves an average of 565 FPS, which represents the absolute ceiling of this configuration. Moving to 2560x1440 at Low settings drops that average to 356 FPS, a reduction of 209 FPS or roughly 37%. Further scaling to 3840x2160 at Low settings yields 186 FPS, which is a 170 FPS drop from 1440p and a 379 FPS drop from 1080p. These substantial declines at lower settings indicate that the CPU is no longer the limiting factor beyond 1080p, as the frame rate reduction outpaces what a pure core-clock scaling would suggest.
At High settings, the pattern is similar but with smaller absolute numbers. The 1080p High average is 361 FPS, which falls to 228 FPS at 1440p High, a 133 FPS decrease. The 4K High result of 119 FPS represents a further 109 FPS drop from 1440p. The percentage reduction from 1080p to 4K at High settings is approximately 67%, which is consistent with a rendering workload that quadruples pixel count while the frame rate only drops to one-third. This non-linear relationship strongly suggests that the RTX 5070 Ti’s rendering throughput, rather than the CPU’s processing capability, determines the upper bound at 4K.
The Medium settings data includes min and max FPS values, which provide additional insight into frame pacing. At 1080p Medium, the average is 420 FPS with a minimum of 357 and maximum of 483, indicating a narrow spread of 126 FPS between the extremes. At 1440p Medium, the average drops to 265 FPS with a min of 225 and max of 305, maintaining a similar relative spread. The 4K Medium result shows an average of 139 FPS with a min of 118 and max of 159, where the gap between min and max is just 41 FPS. This tightening of the frame time distribution at higher resolutions further confirms that the GPU is operating near its sustained capacity, while at lower resolutions the CPU’s burst capability creates larger variance.
Ultra settings produce the lowest averages across all resolutions. The 1080p Ultra average is 258 FPS, which is 107 FPS below the 1080p High result. The 1440p Ultra average is 163 FPS, a 65 FPS drop from 1440p High. The 4K Ultra average is 85 FPS, which is 34 FPS below the 4K High result. The progressive reduction in the delta between High and Ultra as resolution increases—from 107 FPS at 1080p to 34 FPS at 4K—indicates that the additional GPU workload from Ultra settings becomes proportionally more expensive relative to the total frame time at higher resolutions.
CPU Role
The Intel Core i9-14900K is a 24-core, 32-thread processor from the Core 14th Gen series, built on a 10 nm process with a base clock of 3.20 GHz and a boost clock of 6.00 GHz. Its architecture, Raptor Lake-R, includes an L3 cache of 36 MB shared across the die, and the processor supports dual-channel DDR4 and DDR5 memory. The benchmark scores for this CPU are substantial, with a Cinebench R23 multi-core score of 39399.5 and a single-core score of 2262.5, placing it in the 95th percentile against all CPUs.
In Barony, the CPU’s role is most evident at 1080p with Low settings, where the average of 565 FPS represents a frame rate that far exceeds what most displays can refresh. This result is only achievable because the processor’s high single-thread performance, as evidenced by a Geekbench single-core score of 2655, allows the game’s logic and draw call submission to complete in under 1.8 milliseconds per frame. The 6.00 GHz boost clock is particularly relevant here, as roguelike games often have a primary simulation thread that benefits from maximum clock speed rather than core count.
The nearest rival comparisons for the i9-14900K show it is essentially tied with the Intel Core i9-14900KF, which has an average benchmark score of 79371 versus the i9-14900K’s 79097, a delta of -0.3%. The AMD Ryzen AI Max+ 395 is 1.7% slower, while the AMD EPYC 7413 is 1.2% faster and the Intel Core Ultra 9 290HX Plus is 0.6% faster. These margins are small enough that they would not produce meaningful differences in Barony’s FPS at 1080p Low, where the system is already well above any practical frame rate target.
The data indicates that the CPU’s 24 cores are not fully utilized by Barony, as the game’s genre typically does not scale linearly across that many threads. However, the processor’s high average benchmark score of 79097 and its Passmark multithread score of 58674 suggest that background tasks or other system processes will not interfere with the game’s frame pacing. The 125 W TDP and support for ECC memory are secondary characteristics that do not directly influence the measured FPS in this title.
GPU Role
The NVIDIA GeForce RTX 5070 Ti is a Blackwell 2.0 architecture GPU with 16 GB of GDDR7 memory on a 256-bit bus, providing a bandwidth of 896.0 GB/s. Its boost clock is 2452 MHz, and it features 8960 shading units, 280 texture mapping units, and 96 render output units. The GPU’s FP32 throughput is 43.94 TFLOPS, and its memory clock runs at 1750 MHz with 28 Gbps effective data rate. The 5 nm process from TSMC allows a transistor count of 45,600 million on a 378 mm² die.
The GPU’s role in Barony becomes dominant at 1440p and 4K resolutions. The difference between 1080p Low (565 FPS) and 1440p Low (356 FPS) is a 209 FPS reduction for a 1.78x increase in pixel count, which is a much larger drop than the pixel scaling alone would predict. This suggests that even at Low settings, the RTX 5070 Ti’s render output units and texture units begin to saturate at 1440p. At 4K Low, the 186 FPS average is 67% lower than the 1080p Low result, confirming that the GPU is the sole limiting component at this resolution.
The 16 GB VRAM capacity is more than sufficient for Barony, which is a roguelike that does not typically require large texture pools. The measured FPS data shows that even at 4K Ultra, the average of 85 FPS remains playable, indicating that memory bandwidth is not a bottleneck. The 896.0 GB/s bandwidth is likely adequate for the game’s rendering demands, as the frame rate does not show a sudden cliff that would indicate memory swapping or capacity issues.
The GPU’s benchmark performance places it in the 86th percentile against all GPUs, with an average benchmark score of 49957. Its nearest rivals include the AMD Radeon RX Vega 64, which has a delta of -0.1%, and the Intel Arc A550M, which is 0.4% faster. The AMD Radeon RX 6900 XT is 2% faster, and the AMD Radeon RX 6800 XT is 3.1% slower. These comparisons are based on average benchmark scores across multiple tests, but in Barony specifically, the RTX 5070 Ti’s performance at 4K Ultra (85 FPS) versus 4K High (119 FPS) shows a 34 FPS difference, which indicates that the Ultra preset imposes a significant additional shading and texture workload that the GPU’s 43.94 TFLOPS FP32 throughput must handle.
Settings Recommendations
The measured FPS data allows for a direct comparison of settings presets at each resolution. At 1920x1080, the Low preset achieves 565 FPS, Medium achieves 420 FPS, High achieves 361 FPS, and Ultra achieves 258 FPS. The difference between Low and Ultra is 307 FPS, which is a substantial range, but even the Ultra result at 258 FPS is far above the refresh rate of typical 1080p monitors. For players with high-refresh-rate displays, the High preset at 1080p offers a balanced experience with 361 FPS, which is 143 FPS higher than Ultra while still maintaining the visual fidelity that High settings provide.
At 2560x1440, the Low preset produces 356 FPS, Medium produces 265 FPS, High produces 228 FPS, and Ultra produces 163 FPS. The High preset at 1440p is the recommended choice for most users, as its 228 FPS average is sufficient for 240 Hz monitors, while the Ultra preset’s 163 FPS still supports 144 Hz displays. The gap between High and Ultra at 1440p is 65 FPS, which represents a 28.5% performance penalty for the Ultra visual features. Given that the High preset at 1440p is only 133 FPS below the 1080p High result, the resolution upgrade is well worth the frame rate cost.
At 3840x2160, the Low preset yields 186 FPS, Medium yields 139 FPS, High yields 119 FPS, and Ultra yields 85 FPS. The Medium preset at 4K provides a 139 FPS average with a minimum of 118 FPS, which is the only 4K configuration with a recorded minimum above 100 FPS. The High preset at 4K drops to 119 FPS average, which is still smooth but with less headroom. For 4K gaming, the Medium preset is the best balance between visual quality and performance, as it delivers 54 FPS more than Ultra while only sacrificing the additional effects that the Ultra preset enables. The Ultra preset at 4K, at 85 FPS, may be suitable for players who prioritize image quality over frame rate, but the data shows that the step from Medium to Ultra costs 54 FPS.
How This Combo Ranks
The Intel Core i9-14900K and NVIDIA GeForce RTX 5070 Ti combination is ranked 405 out of 3717 tested combos in Barony, placing it in the top 10.9% of all configurations. This ranking reflects the combined capability of the CPU and GPU, where the processor’s high single-thread performance and the graphics card’s substantial rendering throughput work together to produce the high frame rates observed in the measured data. The rank of 405 means that 3,312 other combos are slower, while 404 are faster, indicating that there is a significant population of higher-end configurations, likely featuring more powerful GPUs or newer CPUs.
The combo’s rank is consistent with its component specifications. The CPU’s 95th percentile standing against all CPUs and the GPU’s 86th percentile against all GPUs suggest that this pairing is above average but not at the very top of the performance hierarchy. The fact that the combo ranks 405th rather than higher is likely due to the GPU’s position relative to the absolute fastest graphics cards, as the CPU is already near the top of its class. The 4K Ultra result of 85 FPS indicates that the GPU is the limiting factor at the highest settings, and a more powerful GPU would improve this combo’s rank further.
The measured data for this combo shows no anomalies, as the FPS values follow a consistent pattern across resolutions and settings. The combo’s rank of 405 out of 3717 is a reasonable outcome for a system with a 24-core CPU and a 16 GB GPU, and the performance is sufficient for high-refresh-rate gaming at 1440p and smooth gaming at 4K with adjusted settings.
FAQ
Q: What is the maximum average FPS this combo achieves in Barony?
A: The maximum average FPS is 565 at 1920x1080 with Low settings. The next highest is 420 FPS at 1080p Medium, followed by 361 FPS at 1080p High.
Q: How does the combo perform at 4K Ultra settings?
A: At 3840x2160 with Ultra settings, the combo achieves an average of 85 FPS. This is the lowest measured average across all resolution and settings combinations, but it remains above the 60 FPS threshold for smooth gameplay.
Q: Is this combo better suited for 1440p or 4K gaming?
A: The data shows that at 1440p High, the combo achieves 228 FPS, while at 4K High, it achieves 119 FPS. The 1440p result is nearly double the 4K result, making it the better resolution for high-refresh-rate displays. At 4K, the Medium preset provides 139 FPS, which is the best balance for that resolution.
Q: What is the FPS difference between High and Ultra settings at 1080p?
A: At 1920x1080, the High preset averages 361 FPS, while the Ultra preset averages 258 FPS, a difference of 103 FPS. This indicates a 28.5% performance penalty for Ultra settings at this resolution.
Q: This combo is ranked 405th out of 3717. What does this mean?
A: The rank of 405 out of 3717 places this combo in the top 10.9% of all tested configurations in Barony. It means that 404 combos are faster, while 3,312 combos are slower, indicating a high-performing but not top-tier system.
Q: Does the CPU or GPU limit performance at 1080p Low?
A: At 1920x1080 Low, the average FPS is 565, which is the highest measured value. This suggests that the CPU’s high boost clock of 6.00 GHz is the primary driver, as the GPU has minimal workload at Low settings. The frame rate is likely limited by the game’s simulation thread rather than rendering.
Measured FPS Breakdown
The following are the exact measured average FPS values for the Intel Core i9-14900K and NVIDIA GeForce RTX 5070 Ti combination in Barony, organized by resolution and settings preset.
At 1920x1080:
- Low settings: 565 FPS average
- Medium settings: 420 FPS average, with a minimum of 357 FPS and a maximum of 483 FPS
- High settings: 361 FPS average
- Ultra settings: 258 FPS average
At 2560x1440:
- Low settings: 356 FPS average
- Medium settings: 265 FPS average, with a minimum of 225 FPS and a maximum of 305 FPS
- High settings: 228 FPS average
- Ultra settings: 163 FPS average
At 3840x2160:
- Low settings: 186 FPS average
- Medium settings: 139 FPS average, with a minimum of 118 FPS and a maximum of 159 FPS
- High settings: 119 FPS average
- Ultra settings: 85 FPS average
The Medium settings row is the only preset that includes minimum and maximum FPS values across all three resolutions. The data shows that the spread between minimum and maximum is 126 FPS at 1080p, 80 FPS at 1440p, and 41 FPS at 4K, indicating that frame pacing becomes more consistent as resolution increases and the GPU becomes the primary bottleneck.
Hardware Specifications
Intel Core i9-14900K
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i9-14900K + NVIDIA GeForce RTX 5070 Ti in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 186.0 |
| 3840x2160 | Medium | 139.0 |
| 3840x2160 | High | 119.0 |
| 3840x2160 | Ultra | 85.0 |
| 2560x1440 | Low | 356.0 |
| 2560x1440 | Medium | 265.0 |
| 2560x1440 | High | 228.0 |
| 2560x1440 | Ultra | 163.0 |
| 1920x1080 | Low | 565.0 |
| 1920x1080 | Medium | 420.0 |
| 1920x1080 | High | 361.0 |
| 1920x1080 | Ultra | 258.0 |
Barony with ii9-14900K + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RTX 5070 Ti + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with ii9-14900K + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.