Barony
This combination delivers exceptional performance with an average of 134 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 61 | 71 | 96 |
| 1440p QHD | 84 | 116 | 137 | 181 |
| 1080p Full HD | 131 | 184 | 211 | 289 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with Intel Core i7-14700K + AMD Radeon RX 6600 XT, In-Depth Analysis
Barony, a roguelike released in 2015, shows surprisingly demanding scaling characteristics when paired with the Intel Core i7-14700K and AMD Radeon RX 6600 XT. The measured frame rates reveal a configuration that is heavily influenced by resolution and graphics presets, transitioning from a high-refresh-rate powerhouse at 1080p to a borderline experience at 4K Ultra. This analysis breaks down the performance data, interprets the bottlenecks, and provides actionable settings guidance based solely on the provided benchmark results.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and consistent across all settings, indicating that the rendering load scales aggressively with pixel count. At High settings, the average FPS falls from 184 at 1920x1080 to 115.5 at 2560x1440, and then plummets to 60.6 at 3840x2160. This represents a 67% reduction in average FPS from 1080p to 4K, a magnitude that clearly places the primary performance burden on the graphics processor as resolution increases.
The pattern is even more pronounced at Ultra settings, where the average FPS drops from 131.3 at 1080p to 84.1 at 1440p, and finally to 44.9 at 4K. The 4K Ultra result is the only measured point below 60 FPS, suggesting that the Radeon RX 6600 XT's pixel throughput and memory bandwidth are the limiting factors at this extreme resolution. Conversely, at Low settings, the configuration manages 289 FPS at 1080p and 180.9 FPS at 1440p, but still falls to 96 FPS at 4K, confirming that even the lowest quality preset cannot fully offload the work from the GPU at 4K.
The scaling data implies a balanced system at 1080p and 1440p, where the CPU and GPU can feed each other effectively. However, at 4K, the GPU becomes the clear bottleneck, as the delta between Low and Ultra settings widens significantly. At 1080p, the spread between Low (289 FPS) and Ultra (131.3 FPS) is 157.7 FPS, whereas at 4K, the spread narrows to 51.1 FPS (96 vs. 44.9). This compression of performance at 4K is a classic sign of a GPU-bound scenario, where the graphics card's compute units and memory interface are saturated.
CPU Role
The Intel Core i7-14700K is a 20-core, 28-thread processor based on the Raptor Lake architecture, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. Its benchmark credentials are formidable, scoring 44,534 in Cinebench R23 multi-core and 6,287 in single-core tests. This places the CPU in the 96th percentile against all processors, with an average benchmark score of 70,074, making it a top-tier part for gaming workloads that benefit from high single-thread performance.
In Barony, the CPU's role appears to be secondary but not irrelevant, given the game's roguelike genre which often involves procedural generation and complex simulation logic. At 1080p Low, the average FPS reaches 289, which is likely near the upper limit of what the game engine can produce, suggesting the CPU is keeping up with the GPU's output. However, the data shows that the GPU is the dominant constraint at higher resolutions, as the CPU's high boost clock and large L3 cache (33 MB shared) are sufficient to avoid becoming a bottleneck.
Comparing the i7-14700K to its nearest rivals, it performs nearly identically to the Intel Core i7-14700KF, with a deltaPct of 0, and is only 0.3% slower than an AMD EPYC 9115. It also edges out the AMD Ryzen 9 9950X by 0.5% and the Intel Xeon Platinum 8270 by 1.4% in average benchmark scores. This indicates that the CPU is not the weak link in this configuration for Barony; the data suggests that its 20 cores and high clocks provide ample headroom for the game's logic, even at lower resolutions where frame rates are highest.
GPU Role
The AMD Radeon RX 6600 XT is a mid-range RDNA 2.0 graphics card with 8 GB of GDDR6 memory on a 128-bit bus, providing a memory bandwidth of 256.0 GB/s. Its boost clock reaches 2589 MHz, with a game clock of 2359 MHz, and it delivers 10.60 TFLOPS of FP32 performance. The GPU sits in the 71st percentile of all graphics cards, with an average benchmark score of 27,985, positioning it as a capable 1080p and 1440p performer.
In Barony, the GPU's 8 GB VRAM and 128-bit bus become significant factors at higher resolutions. The measured data shows that at 4K Ultra, the average FPS drops to 44.9, which is below the playable threshold for many users. The 256.0 GB/s bandwidth appears to be a limiting factor, as the pixel rate (165.7 GPixel/s) and texture rate (331.4 GTexel/s) are taxed heavily by the 3840x2160 resolution. The GPU's performance relative to its nearest rivals shows it is 0.1% faster than a GeForce GTX 980 Ti and 0.4% faster than a Radeon R9 M395X, but 0.9% slower than a GeForce RTX 3070 and 1.5% slower than a FirePro S7150.
The data indicates that the RX 6600 XT is the primary bottleneck at 4K, where even Low settings yield just 96 FPS average. At 1440p, the GPU still holds the reins, but the frame rates are more acceptable, with High settings achieving 115.5 FPS and Ultra hitting 84.1 FPS. At 1080p, the GPU is less stressed, allowing the CPU to push frame rates above 180 FPS on all but Ultra settings, where the GPU's shading units (2048) and ROPs (64) are still sufficient for 131.3 FPS average.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of the configuration's performance across three resolutions and four settings presets. At 1920x1080, the average FPS ranges from 289 on Low to 131.3 on Ultra, with High at 184 and Medium at 210.8. These numbers indicate a smooth experience at all presets, with even Ultra providing frame rates well above 100 FPS for fast-paced gameplay.
At 2560x1440, the average FPS drops significantly, with Low at 180.9, Medium at 136.7, High at 115.5, and Ultra at 84.1. The 1440p Ultra result is still playable, but the margin for error is smaller, and the data suggests that High settings offer a better balance of visual quality and performance. At 3840x2160, the results are more challenging: Low averages 96 FPS, Medium 70.5, High 60.6, and Ultra 44.9. Only the Low and Medium presets maintain frame rates above 60 FPS at 4K, indicating that this resolution is at the edge of the RX 6600 XT's capabilities.
The data shows a consistent pattern: each step up in resolution costs roughly 40-50% of the frame rate at a given setting, while each step up in settings costs about 20-30% of the frame rate at a given resolution. The combination of these factors means that the configuration is best suited for 1080p and 1440p gaming, with 4K reserved for lower quality presets or less demanding scenes.
FAQ
Q: Can the Intel Core i7-14700K and AMD Radeon RX 6600 XT run Barony at 4K?
A: Yes, but with caveats. At 4K Low, the average FPS is 96, and at Medium it's 70.5, both playable. However, at High, the average drops to 60.6, and at Ultra it falls to 44.9, which may be too low for smooth gameplay.
Q: What is the best resolution for this configuration to maintain high frame rates?
A: The data shows that 1920x1080 provides the highest frame rates, with an average of 184 FPS on High and 131.3 FPS on Ultra. 2560x1440 is also viable, with High averaging 115.5 FPS, but 4K Ultra is not recommended.
Q: How does the RX 6600 XT compare to its nearest rival, the GTX 980 Ti?
A: The RX 6600 XT has an average benchmark score of 27,985, which is 0.1% higher than the GTX 980 Ti's score of 27,956. In Barony, this translates to a negligible difference in performance.
Q: Is the CPU or GPU the main bottleneck in Barony?
A: At 1080p and 1440p, the system is balanced, but at 4K, the GPU is clearly the limiting factor. The CPU's high single-core score of 6,287 in Cinebench R23 suggests it can handle the game's logic, but the GPU's 8 GB VRAM and 256.0 GB/s bandwidth struggle with 3840x2160.
Q: What frame rate can I expect at 1440p with Ultra settings?
A: The measured average FPS at 2560x1440 with Ultra settings is 84.1. This is above 60 FPS and should provide a fluid experience, though it's lower than the 115.5 FPS seen on High settings.
Q: Is the i7-14700K significantly faster than the Ryzen 9 9950X?
A: No. The i7-14700K has an average benchmark score of 70,074, which is 0.5% higher than the Ryzen 9 9950X's score of 70,420. This difference is negligible in real-world gaming scenarios.
Settings Recommendations
Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For players prioritizing the highest possible frame rates at 1920x1080, the Low preset delivers an average of 289 FPS, but this sacrifices visual fidelity. The High preset at 1080p offers a strong balance, delivering 184 FPS average, which is more than sufficient for any display. Ultra at 1080p is also viable, with 131.3 FPS average, making it the recommended choice for those with high-refresh-rate monitors seeking maximum detail.
At 2560x1440, the High preset is the sweet spot, achieving 115.5 FPS average, which comfortably exceeds 60 FPS and provides a responsive experience. The Medium preset at 136.7 FPS is also a good option for extra headroom, while Ultra at 84.1 FPS is acceptable for slower-paced gameplay but may feel less smooth in action-heavy scenes. For 4K, the data suggests using the Low preset (96 FPS average) or Medium preset (70.5 FPS average) to stay above 60 FPS. The High preset at 60.6 FPS is borderline, and Ultra at 44.9 FPS is not recommended for consistent playability.
In summary, the configuration shines at 1080p and 1440p, where it can handle High and Ultra settings with ease. The best overall experience per the measured rows is the High preset at 1440p, which offers a substantial visual upgrade over 1080p while maintaining an average frame rate above 100 FPS. For 4K users, Medium settings provide the best compromise between visual quality and performance, ensuring a stable frame rate without dropping below the 60 FPS threshold.
Hardware Specifications
Intel Core i7-14700K
AMD Radeon RX 6600 XT
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700K + AMD Radeon RX 6600 XT in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 96.0 |
| 3840x2160 | Medium | 70.5 |
| 3840x2160 | High | 60.6 |
| 3840x2160 | Ultra | 44.9 |
| 2560x1440 | Low | 180.9 |
| 2560x1440 | Medium | 136.7 |
| 2560x1440 | High | 115.5 |
| 2560x1440 | Ultra | 84.1 |
| 1920x1080 | Low | 289.0 |
| 1920x1080 | Medium | 210.8 |
| 1920x1080 | High | 184.0 |
| 1920x1080 | Ultra | 131.3 |
Barony with ii7-14700K + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 6600 XT + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with ii7-14700K + RX 6600 XT
Explore FPS benchmarks for other games using this same hardware combination.