Barony
This combination delivers exceptional performance with an average of 139 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 61 | 72 | 100 |
| 1440p QHD | 88 | 120 | 137 | 192 |
| 1080p Full HD | 138 | 189 | 225 | 299 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with Intel Core i5-14600KF + AMD Radeon RX 6650 XT, In-Depth Analysis
Barony, a roguelike from 2015, presents an interesting case for the Intel Core i5-14600KF and AMD Radeon RX 6650 XT combination. The data shows a system that scales predictably with resolution, but the relationship between settings and frame rate reveals the specific strengths and bottlenecks of this pairing. This analysis breaks down the measured performance across three resolutions and four quality presets, interpreting what the numbers imply about the underlying hardware.
Resolution Scaling
The FPS drop from 1080p to 4K is substantial, but the pattern is not uniform across all settings. At 1080p Low, the combo achieves 299.3 FPS, which falls to 100.1 FPS at 4K Low — a 66.6% reduction. This steep decline indicates that even at lower graphical loads, the GPU is being pushed to its limits as pixel count quadruples. The scaling from 1080p to 1440p shows a similar trend: 299.3 FPS drops to 191.7 FPS, a 35.9% decrease, which is roughly proportional to the 1.78x increase in pixel count.
The Ultra preset tells a slightly different story. At 1080p Ultra, the combo hits 137.7 FPS, but at 4K Ultra it falls to 47.7 FPS — a 65.4% drop. This suggests that at 1080p Ultra, the CPU is still providing enough headroom to keep the GPU busy, but at 4K Ultra, the GPU becomes the clear limiting factor. The jump from 1440p Ultra (87.9 FPS) to 4K Ultra (47.7 FPS) is a 45.7% decline, which is steeper than the pixel count increase alone would suggest, indicating that the Ultra preset's additional effects are disproportionately taxing at higher resolutions.
The data indicates that this combo is most balanced at 1440p, where the frame rates remain high enough for smooth gameplay but the GPU is not as saturated as it is at 4K. At 1080p, the system is likely CPU-bound in lower presets, as evidenced by the 299.3 FPS ceiling at Low settings, which is unusually high for a 2015 roguelike and suggests the CPU is capable of feeding frames far beyond what the GPU can render at higher resolutions.
How This Combo Ranks
Among the 1,702 tested combos in Barony, this pairing sits at rank 1092. This places it in the lower third of all systems tested, which is surprising given the hardware's specifications. The rank suggests that while the individual components are capable — the CPU sits at the 93rd percentile and the GPU at the 72nd percentile — their combination in this specific game does not translate to top-tier performance.
The rank of 1092 out of 1702 means that roughly 64% of tested combos outperform this one in Barony. This is a notable discrepancy from what the component percentiles would predict. The data implies that Barony's engine may not be well-optimized for this particular architecture pairing, or that the game's roguelike nature with procedural generation places unusual demands on the system. The GPU's 72nd percentile ranking is the lower of the two components, and it appears to be the bottleneck in most scenarios, which would explain why the combo rank is dragged down.
The CPU's nearest rivals include the Intel Core i5-14600K, which scores 0.4% higher in average benchmarks, and the AMD Ryzen 9 5950X at 0.6% higher. The GPU's closest competitor is the AMD Radeon RX 6800M, which matches the 6650 XT's average score exactly. This means the combo's performance in Barony is not limited by a weak CPU or GPU relative to their peers, but rather by how they interact within this specific game's rendering pipeline.
GPU Role
The Radeon RX 6650 XT features 8 GB of GDDR6 memory on a 128-bit bus, delivering 280.3 GB/s of bandwidth. The GPU's boost clock reaches 2635 MHz, with a game clock of 2410 MHz. The 2048 shading units and 64 ROPs provide a solid foundation for 1080p and 1440p gaming, but the 128-bit memory bus becomes a constraint at 4K, where the higher pixel count demands more memory throughput.
The measured FPS at 4K Ultra (47.7 FPS) versus 4K High (61.3 FPS) shows a 22.2% performance gap, which is larger than the typical difference between these presets in most games. This suggests that the Ultra preset's additional effects are memory-intensive, and the 8 GB VRAM capacity combined with the 280.3 GB/s bandwidth is insufficient to maintain high frame rates at this resolution. The GPU's 72nd percentile ranking among all GPUs is respectable, but the data shows it is the limiting factor in this combo, especially at higher resolutions and settings.
The GPU's nearest rival, the RX 6800M, has an identical average benchmark score with a 0% delta, yet in Barony, the 6650 XT's performance characteristics — particularly its memory configuration — may explain why the combo rank is lower than expected. The GPU's FP32 throughput of 10.79 TFLOPS is competitive for its class, but roguelike games like Barony often have unique rendering requirements that don't align perfectly with raw compute power.
Measured FPS Breakdown
At 1920x1080, the combo delivers 299.3 FPS on Low, 224.6 FPS on Medium, 188.5 FPS on High, and 137.7 FPS on Ultra. The gap between Low and Ultra is 161.6 FPS, representing a 54% reduction in performance when moving from the most demanding to the least demanding preset. The step from Medium to High (224.6 to 188.5 FPS) is a 16.1% drop, while High to Ultra (188.5 to 137.7 FPS) is a 26.9% drop — the Ultra preset is significantly more demanding than High.
At 2560x1440, the numbers are 191.7 FPS on Low, 137.4 FPS on Medium, 119.8 FPS on High, and 87.9 FPS on Ultra. The scaling from Low to Ultra is 103.8 FPS, a 54.2% reduction. Interestingly, the jump from Medium to High at 1440p is only 12.8% (137.4 to 119.8 FPS), which is smaller than the 16.1% drop seen at 1080p. This suggests that the GPU is becoming more of a bottleneck at 1440p, smoothing out the differences between medium and high settings.
At 3840x2160, the performance drops to 100.1 FPS on Low, 71.5 FPS on Medium, 61.3 FPS on High, and 47.7 FPS on Ultra. The reduction from Low to Ultra is 52.4 FPS, a 52.3% decline. The High to Ultra transition is 22.2% (61.3 to 47.7 FPS), which is the smallest relative drop among all resolutions, indicating that at 4K, even the High preset is already taxing the GPU heavily, and Ultra adds only marginal additional load. The data shows that 4K Low is the only 4K preset that breaks 100 FPS, while 4K Ultra barely reaches playable frame rates.
FAQ
Q: What is the highest average FPS this combo achieves in Barony?
A: The highest measured average FPS is 299.3, achieved at 1920x1080 with Low settings. This is nearly double the 1440p Low score of 191.7 FPS and triple the 4K Low score of 100.1 FPS.
Q: Is the combo CPU-bound or GPU-bound at 1080p?
A: The data suggests CPU-bound behavior at 1080p Low, where the 299.3 FPS figure is likely near the CPU's frame delivery limit. The i5-14600KF's 14 cores and 20 threads with a 5.30 GHz boost clock provide ample headroom, but the GPU's 128-bit memory bus becomes the limiting factor when moving to higher settings or resolutions.
Q: How does the Ultra preset compare to High at 4K?
A: At 3840x2160, Ultra delivers 47.7 FPS versus High's 61.3 FPS, a 22.2% reduction. This is the smallest relative gap between High and Ultra across all resolutions, indicating that the GPU is already saturated at 4K High and Ultra adds only marginal additional strain.
Q: What is the combo's rank among all tested systems in Barony?
A: The combo ranks 1092 out of 1702 tested combinations. This puts it in the lower 36% of systems, despite the CPU sitting at the 93rd percentile and the GPU at the 72nd percentile among their respective components.
Q: Which resolution provides the best balance of performance and visual quality?
A: The data indicates 2560x1440 with High settings is the sweet spot, delivering 119.8 FPS. This is well above the 60 FPS threshold and only 16.1% below the 1440p Low score, while providing significantly better visual fidelity than Low or Medium presets.
Q: Does the GPU's 8 GB VRAM impact performance at 4K?
A: The measured FPS at 4K Ultra (47.7 FPS) compared to 4K High (61.3 FPS) suggests memory bandwidth constraints. The 280.3 GB/s bandwidth and 8 GB capacity are adequate for 1080p and 1440p, but the 4K Ultra preset's demands likely exceed what the 128-bit bus can efficiently deliver.
CPU Role
The Intel Core i5-14600KF is a 14-core, 20-thread processor based on Raptor Lake architecture, with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. It features 24 MB of shared L3 cache and supports DDR4 and DDR5 memory. The CPU's benchmark scores are strong, with a Cinebench R23 multi-core score of 32,889 and a single-core score of 4,643, placing it at the 93rd percentile of all CPUs.
In Barony, the CPU's role is primarily to feed the GPU with frames. At 1080p Low, the 299.3 FPS result indicates the CPU is capable of delivering frames at a rate that far exceeds the GPU's rendering capacity at higher settings. The CPU's nearest rival, the i5-14600K, scores 0.4% higher in average benchmarks, and the AMD EPYC 4345P scores 0.5% lower, showing that the 14600KF is well-matched against its peers.
The CPU's 5.30 GHz boost clock is particularly relevant for a roguelike like Barony, which may have single-threaded game logic. The passmark single-thread score of 4,273 confirms strong per-core performance. The CPU's 93rd percentile ranking suggests it is not the bottleneck in this combo — the data points to the GPU as the limiting factor, especially at 4K where the 47.7 FPS Ultra result is far below the CPU's potential frame delivery rate.
Settings Recommendations
The measured data shows that the Ultra preset provides diminishing returns at higher resolutions. At 1080p, Ultra delivers 137.7 FPS, which is 26.9% lower than High's 188.5 FPS — a significant drop for visual improvements that may be hard to notice in a fast-paced roguelike. At 1440p, Ultra drops to 87.9 FPS, which is still playable but approaches the threshold where frame pacing becomes noticeable. At 4K, Ultra's 47.7 FPS is below the ideal 60 FPS target.
The High preset offers the best balance across all resolutions. At 1080p, it delivers 188.5 FPS, which is 36.9% higher than Ultra. At 1440p, High hits 119.8 FPS, comfortably above 60 FPS and only 12.8% below Medium's 137.4 FPS. At 4K, High achieves 61.3 FPS, which is just above the 60 FPS threshold and 28.5% higher than Ultra's 47.7 FPS.
For players prioritizing frame rate, Low settings at 1440p (191.7 FPS) or even 4K (100.1 FPS) provide excellent smoothness, but the visual trade-off may be significant. The Medium preset is a middle ground, offering 224.6 FPS at 1080p and 71.5 FPS at 4K. Given the data, High at 1440p is the recommended configuration — it maintains high frame rates while providing a substantial visual upgrade over Low and Medium, and the 119.8 FPS result leaves headroom for any minor frame drops during intense roguelike encounters.
Hardware Specifications
Intel Core i5-14600KF
AMD Radeon RX 6650 XT
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14600KF + AMD Radeon RX 6650 XT in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 100.1 |
| 3840x2160 | Medium | 71.5 |
| 3840x2160 | High | 61.3 |
| 3840x2160 | Ultra | 47.7 |
| 2560x1440 | Low | 191.7 |
| 2560x1440 | Medium | 137.4 |
| 2560x1440 | High | 119.8 |
| 2560x1440 | Ultra | 87.9 |
| 1920x1080 | Low | 299.3 |
| 1920x1080 | Medium | 224.6 |
| 1920x1080 | High | 188.5 |
| 1920x1080 | Ultra | 137.7 |
Barony with ii5-14600KF + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 6650 XT + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with ii5-14600KF + RX 6650 XT
Explore FPS benchmarks for other games using this same hardware combination.