Barony

The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 4060 achieves a combo rank of 1555 out of 2935 tested combinations in Barony, placing it in the 47th percentile of all tested systems. This mid-pack positioning indicates that while the combination is far from the top tier, it sits comfortably above the median performer, delivering frame rates that are more than adequate for the game’s roguelike gameplay. The ranking reflects a balance where neither component is a severe bottleneck at most settings, though the data reveals that the RTX 4060 is the primary constraint at higher resolutions and presets. In the context of the broader benchmark database, this combo outperforms a significant majority of systems, yet it trails the top 50% by a considerable margin, suggesting that enthusiasts seeking maximum headroom would need to look toward higher-end GPUs or CPUs to climb the ranks.

How This Combo Ranks

The combo’s rank of 1555 out of 2935 tested configurations places it in the 47th percentile, meaning it outperforms approximately 47% of all recorded system pairings in Barony. This is a respectable result for a mid-range GPU like the RTX 4060, which holds a 61st percentile ranking among all GPUs, paired with a high-end CPU like the Ryzen 7 9850X3D, which ranks in the 92nd percentile among all CPUs. The discrepancy between the CPU’s high percentile and the GPU’s more modest percentile suggests that the GPU is the limiting factor in most scenarios, dragging the overall combo rank down from what the CPU alone might achieve. When compared to other combos in the database, this pairing lands in the lower-middle tier, indicating that users with this setup will enjoy smooth gameplay at most settings but will not experience the extreme frame rates seen in top-tier configurations. The data shows that the combo’s position is primarily determined by the GPU’s performance ceiling, as the CPU’s strong benchmark scores cannot compensate for the GPU’s limitations at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 4060 features 8 GB of GDDR6 memory on a 128-bit bus, providing a memory bandwidth of 272.0 GB/s. Its boost clock reaches 2460 MHz, with a base clock of 1830 MHz, and the GPU is built on the Ada Lovelace architecture using a 5 nm process. In Barony, the GPU’s role is decisive across all measured resolutions, as evidenced by the frame rate scaling when settings change. At 1080p, the GPU delivers 340 fps on Low settings, which drops to 156 fps on Ultra, showing that the GPU can handle even the most demanding presets at this resolution with ease. However, at 4K, the same settings produce 112 fps on Low and 51 fps on Ultra, indicating that the GPU’s 8 GB VRAM and 128-bit memory bus become significant bottlenecks at higher pixel counts. The GPU’s passmark G3D score of 19545 and its 61st percentile ranking among all GPUs reinforce that it is a mid-range performer, capable of maintaining playable frame rates in Barony but not achieving the high refresh rates that more powerful GPUs might offer. The RTX 4060’s nearest rivals include the AMD Radeon HD 7790 with a deltaPct of -0.2 and the AMD Radeon 780M with a deltaPct of 0.3, highlighting that the GPU’s performance is closely matched by integrated solutions in some synthetic benchmarks, though in-game results show a clear advantage for the dedicated card.

Resolution Scaling

Frame rates drop significantly as resolution increases from 1080p to 4K, which reveals the limiting component in this system. At 1080p High settings, the combo achieves 217 fps, which falls to 137 fps at 1440p and further to 72 fps at 4K. This represents a 67% drop in performance from 1080p to 4K, indicating that the GPU is the primary bottleneck at higher resolutions. The pattern is consistent across all settings: at Low, the frame rate drops from 340 fps at 1080p to 215 fps at 1440p and 112 fps at 4K, a 67% reduction; at Medium, it falls from 253 fps at 1080p to 160 fps at 1440p and 83 fps at 4K, a 67% drop; at Ultra, it goes from 156 fps at 1080p to 98 fps at 1440p and 51 fps at 4K, again a 67% reduction. This consistent scaling suggests that the GPU’s processing power and memory bandwidth are the limiting factors, as the CPU’s high performance (with 8 cores and 16 threads) is more than sufficient to feed the GPU at all resolutions. The data shows that the RTX 4060’s 8 GB VRAM is likely a constraint at 4K, where the higher pixel count demands more memory bandwidth, but at 1080p and 1440p, the GPU remains the primary limiter, with the CPU having little impact on frame rates.

Measured FPS Breakdown

At 1080p, the RTX 4060 paired with the Ryzen 7 9850X3D delivers exceptional performance across all settings. On Low settings, the average frame rate is 340 fps, which is exceptionally high and indicates that the CPU is not a bottleneck at this resolution. Medium settings yield 253 fps, with minimum and maximum frame rates of 215 and 291 fps, respectively, providing a smooth experience with minimal frame time variance. High settings produce 217 fps, while Ultra settings drop to 156 fps, still well above the 144 Hz refresh rate of most monitors. Moving to 1440p, the frame rates remain highly playable: Low settings achieve 215 fps, Medium settings 160 fps (with min/max of 136 and 183 fps), High settings 137 fps, and Ultra settings 98 fps. The transition from 1080p to 1440p results in a performance penalty of approximately 37% across settings, which is expected given the increased pixel count. At 4K, the system struggles to maintain high frame rates: Low settings produce 112 fps, Medium settings 83 fps (with min/max of 71 and 96 fps), High settings 72 fps, and Ultra settings 51 fps. The 4K results show that while the game remains playable at Low and Medium settings, Ultra settings dip below 60 fps, making it less ideal for smooth gameplay at maximum quality. The measured data indicates that the sweet spot for this combo is 1440p, where the frame rates are high enough for competitive play while maintaining visual fidelity.

Settings Recommendations

Based on the measured frame rates, the best experience for this combo in Barony is achieved at 1440p with High settings, which delivers 137 fps on average. This provides a balance between visual quality and performance, ensuring smooth gameplay without the frame rate drops seen at 4K. For users prioritizing maximum frame rates, 1080p with Low settings offers 340 fps, which is ideal for high-refresh-rate monitors or competitive play, though the visual fidelity is reduced. At 4K, the data suggests that Low settings (112 fps) or Medium settings (83 fps) are the most viable options, as they maintain playable frame rates above 60 fps. Ultra settings at 4K should be avoided, as the 51 fps average dips below the 60 fps threshold that many players consider the minimum for smooth gameplay. For those with 144 Hz monitors, 1440p with Medium settings (160 fps) is an excellent choice, as it stays above the refresh rate while offering better visuals than Low settings. The data shows that the combo is best utilized at 1080p or 1440p, where the GPU’s limitations are less pronounced, and users should reserve 4K for less demanding presets to ensure a consistent experience.

CPU Role

The AMD Ryzen 7 9850X3D is a high-end desktop processor with 8 cores and 16 threads, based on the Zen 5 architecture (Granite Ridge) and manufactured on a 4 nm process. It has a base clock of 4.70 GHz and a boost clock of 5.60 GHz, with a large 96 MB shared L3 cache that is characteristic of the X3D series. In Barony, the CPU’s role is largely supportive, as the game’s roguelike genre typically relies more on GPU performance than CPU processing. However, the CPU’s strong benchmark scores—such as a Cinebench R23 multi-core score of 22807 and a single-core score of 2228—indicate that it is more than capable of handling the game’s logic and AI without bottlenecking the GPU. The CPU’s percentile ranking of 92 among all CPUs places it in the top tier, and its nearest rivals include the Intel Core i9-14900 (deltaPct of 0.5) and the AMD Ryzen AI 9 HX 470 (deltaPct of -0.7), showing that its performance is competitive with other high-end processors. In the measured frame rates, the CPU’s impact is minimal, as evidenced by the consistent performance scaling across resolutions, which suggests that the GPU is the limiting factor. At 1080p Low settings, the frame rate of 340 fps is close to the CPU’s maximum throughput, but at higher resolutions, the GPU becomes the bottleneck, and the CPU’s high single-thread performance ensures that frame times remain stable. The CPU’s 16 threads and high clock speeds provide ample headroom for background tasks and future game updates, but in Barony, its primary contribution is ensuring that the GPU is never starved of data, which is confirmed by the high frame rates at all resolutions.

FAQ

Q: What is the combo’s rank among all tested systems in Barony?

A: The combo ranks 1555 out of 2935 tested combinations, placing it in the 47th percentile of all systems.

Q: How does the RTX 4060 compare to its nearest rivals in synthetic benchmarks?

A: The RTX 4060 has an average benchmark score of 17639, with its closest rivals being the AMD Radeon HD 7790 (deltaPct of -0.2), AMD Radeon 780M (deltaPct of 0.3), AMD Radeon Pro 560 (deltaPct of 0.5), and AMD Radeon Pro 460 (deltaPct of 0.7).

Q: What is the best resolution and settings for this combo to maintain 60+ fps?

A: At 4K, Low settings (112 fps) and Medium settings (83 fps) both exceed 60 fps, while High (72 fps) also qualifies. Ultra settings at 4K (51 fps) fall below 60 fps. At 1440p, all settings exceed 60 fps, with Ultra at 98 fps.

Q: How much does performance drop from 1080p to 4K?

A: Across all settings, the frame rate drops by approximately 67% from 1080p to 4K. For example, at High settings, it goes from 217 fps at 1080p to 72 fps at 4K.

Q: What is the CPU’s percentile ranking and how does it compare to rivals?

A: The Ryzen 7 9850X3D ranks in the 92nd percentile among all CPUs. Its nearest rivals include the Intel Xeon Platinum 8260M (deltaPct of 0.1), Intel Xeon w5-2545 (deltaPct of -0.2), Intel Core i9-14900 (deltaPct of 0.5), and AMD Ryzen AI 9 HX 470 (deltaPct of -0.7).

Q: Is the GPU or CPU the limiting factor in this combo?

A: The GPU is the limiting factor, as evidenced by the consistent 67% performance drop from 1080p to 4K across all settings. The CPU’s high benchmark scores (e.g., 22807 in Cinebench R23 multi-core) ensure it does not bottleneck the GPU.