Barony

The AMD Ryzen 7 7700 and NVIDIA GeForce GTX 1070 combination delivers a playable experience in Barony, but the data reveals a system where the GPU is the primary constraint at higher resolutions. The measured FPS ranges from a highly fluid 234 frames per second at 1080p Low to a demanding 35.8 frames per second at 4K Ultra. This spread of nearly 200 FPS between the easiest and hardest settings underscores how sensitive this pairing is to both resolution and graphical fidelity.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings, confirming that the GTX 1070 is the limiting component in this configuration. At High settings, the average frame rate falls from 150.7 FPS at 1920x1080 to 96.4 FPS at 2560x1440, a reduction of 54.3 FPS. Pushing further to 3840x2160, the average drops to 49.9 FPS, which is roughly one-third of the 1080p figure.

This scaling pattern is typical of a GPU-bound scenario. The Ryzen 7 7700, with its 8 cores and 16 threads, is more than capable of feeding the graphics card at lower resolutions. The data shows that at 1080p Low, the system achieves 234 FPS, a figure that is likely near the CPU's practical limit for this game engine. However, as resolution increases, the pixel fill rate and memory bandwidth demands on the GTX 1070 escalate, and performance degrades in a predictable, linear fashion.

The difference between Low and Ultra settings also widens with resolution. At 1080p, the gap between Low and Ultra is 123.6 FPS (234 vs 110.4). At 4K, that gap narrows to 43.4 FPS (79.2 vs 35.8). This suggests that at 4K, the GPU is so saturated that even reducing settings cannot fully compensate for the raw pixel count, whereas at 1080p, the settings have a much larger impact on the final frame rate.

How This Combo Ranks

Within the database of tested configurations, this combination of CPU and GPU ranks at position 1440 out of 1702 combos for Barony. This places it in the lower half of all tested pairings, which is consistent with the GTX 1070 being an older, mid-range card. The rank indicates that while the system is functional, a significant portion of other hardware pairings delivers higher average frame rates in this specific title.

The CPU itself does not appear to be the bottleneck in this ranking. The Ryzen 7 7700 sits in the 91st percentile against all CPUs, with an average benchmark score of 40468. Its nearest rivals, such as the AMD Ryzen 9 7940H and Intel Core i9-13905H, have average scores within 0.6% of the 7700. This shows that the processor is a high-performing part that should not drag down the system's ranking in a CPU-light game like Barony. The low rank is therefore attributable to the GPU's performance class, not the CPU.

GPU Role

The NVIDIA GeForce GTX 1070 is the determining factor for the frame rates observed. Its 8 GB of GDDR5 memory on a 256-bit bus provides a memory bandwidth of 256.3 GB/s, which is adequate for 1080p and 1440p gaming but becomes strained at 4K. The card's base clock of 1506 MHz and boost clock of 1683 MHz are the engine speeds that define its processing throughput.

The GPU's benchmarks show it performs at the 51st percentile against all GPUs, with an average score of 12331. Its nearest rival, the NVIDIA GeForce GTX 1650 SUPER, has a score of 12504, a delta of -1.4%. This indicates the GTX 1070 is a solid mid-range performer, but it is far from the top of the charts. In Barony, this translates to the system being able to handle 1440p High at 96.4 FPS, but falling below the 60 FPS threshold at 4K Ultra with 35.8 FPS. The data suggests that for a smooth 4K experience, a more powerful GPU would be necessary.

Settings Recommendations

Based on the measured FPS values, the optimal balance of visual quality and performance is found at 2560x1440 with High settings, yielding an average of 96.4 FPS. This provides a substantial frame rate cushion above the 60 FPS standard, ensuring smooth gameplay while maintaining high visual fidelity. At 1920x1080, the High preset delivers 150.7 FPS, which is excellent for high-refresh-rate monitors, but the visual upgrade to 1440p is often worth the performance trade-off.

For users prioritizing maximum frame rates, the Low preset at 1080p achieves 234 FPS, which is ideal for competitive play. However, the jump to Medium at 1080p provides 176.1 FPS, a significant visual improvement with only a 57.9 FPS reduction, making it a sensible middle ground. At 4K, the Medium preset's 55.3 FPS is the highest setting that remains above 50 FPS; any higher preset will dip below playable thresholds for most users. The Ultra preset at any resolution is demanding, but at 1440p it still hits 67 FPS, which is playable for those who prioritize image quality above all else.

Measured FPS Breakdown

At 1920x1080, the system performs exceptionally well. The Low preset achieves an average of 234 FPS, while Medium drops to 176.1 FPS. High settings provide 150.7 FPS, and the Ultra preset still delivers a very playable 110.4 FPS. This resolution is clearly where the GTX 1070 is most comfortable, with all presets exceeding 100 FPS.

At 2560x1440, performance remains strong but shows the GPU working harder. Low settings yield 145.6 FPS, which drops to 108 FPS on Medium. High settings provide 96.4 FPS, a marginal step down from the 1080p High result. The Ultra preset is the first to show significant strain, with an average of 67 FPS, which is still playable but noticeably lower than the other presets.

At 3840x2160, the GPU is heavily taxed. The Low preset manages 79.2 FPS, which is playable, while Medium drops to 55.3 FPS. High settings provide 49.9 FPS, and the Ultra preset falls to 35.8 FPS. The data clearly shows that 4K gaming with this combination requires a significant compromise on settings to maintain a consistent frame rate, with only the Low preset staying comfortably above 60 FPS.