Barony

The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 4070 delivers exceptional performance in Barony, a roguelike title that rarely stresses modern hardware. The measured frame rates show triple-digit averages across nearly every configuration tested, with the only sub-100 FPS result appearing at 4K Ultra. This combination places in the top quarter of all tested system pairings, ranking 403rd out of 1702 combos, indicating that users can expect a highly fluid experience regardless of their display choice.

Resolution Scaling

Resolution scaling in Barony reveals a predictable pattern: frame rates decline as pixel count rises, but the magnitude of that decline depends heavily on the graphics preset. Looking at the High preset, the system delivers 301.3 FPS at 1080p, dropping to 188.8 FPS at 1440p, and settling at 101.7 FPS at 4K. This represents a 37% reduction from 1080p to 1440p, and a further 46% drop when moving to 4K. The scaling suggests the GPU becomes progressively more influential at higher resolutions, though the RTX 4070 maintains playable performance throughout.

The Low preset shows the most dramatic scaling behavior. At 1080p, the combination produces 470 FPS, which falls to 297 FPS at 1440p and 154.6 FPS at 4K. The 1080p result is extraordinarily high, indicating that at this resolution the CPU is likely the limiting factor, as the frame rate exceeds what most displays can even refresh. The 4K Low result still exceeds 150 FPS, demonstrating that even at maximum pixel count, the RTX 4070 has ample headroom in this title.

Ultra settings present the steepest scaling curve. The system achieves 215 FPS at 1080p, 138 FPS at 1440p, and only 72.8 FPS at 4K. The 4K Ultra figure is the only measured result below 100 FPS, suggesting that this configuration pushes the GPU to its limits. Interestingly, the gap between Medium and Ultra at 4K is substantial: 116.1 FPS versus 72.8 FPS, a difference of roughly 37%. This indicates that Ultra settings impose a significant additional load compared to Medium, likely due to enhanced effects and draw distances.

The scaling pattern points to a balanced system where neither component is consistently the bottleneck. At 1080p Low, the CPU-bound nature is evident from the 470 FPS ceiling. At 4K Ultra, the GPU clearly dominates the performance equation. The middle ground—1440p Medium and High—represents the sweet spot where both components contribute meaningfully to the frame rate.

How This Combo Ranks

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 4070 combination ranks 403rd out of 1702 tested system pairings in Barony, placing it in the 76th percentile of all combos. This is a strong showing for a mid-range desktop configuration, especially considering the game’s roguelike nature, which often favors single-threaded CPU performance over raw GPU throughput.

The CPU itself sits in the 83rd percentile among all processors, with an average benchmark score of 26272. Its nearest rivals include the AMD Ryzen 7 PRO 6850U, which scores 26262 (a 0% delta), and the AMD Ryzen 7 5700X at 26214 (a 0.2% delta). The 7600X essentially matches these alternatives in synthetic benchmarks, though its 6-core, 12-thread configuration with a 5.30 GHz boost clock gives it a distinct advantage in lightly threaded workloads typical of roguelike games.

On the GPU side, the RTX 4070 achieves an 81st percentile ranking with an average benchmark score of 37283. Its nearest rival, the AMD Radeon RX Vega 56, scores 37507, a -0.6% delta, while the NVIDIA GeForce MX570 A trails at 38008 (-1.9%). The RTX 4070’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth provide ample resources for Barony, which does not appear to be memory-constrained based on the measured frame rates.

The combination’s rank of 403 suggests that roughly 76% of tested systems perform better, but context matters. Many of those higher-ranked combos likely feature flagship GPUs like the RTX 4090 or top-tier CPUs, which are unnecessary for a game that already delivers over 200 FPS at 1080p High. The 7600X + RTX 4070 pairing offers a compelling balance for high-refresh-rate gaming without excessive expenditure on components that would offer diminishing returns in this title.

FAQ

*Q: What is the highest frame rate this combo achieves in Barony?*

A: The maximum measured average FPS is 470, achieved at 1920x1080 with Low settings. This result is nearly double the 1080p High figure of 301.3 FPS.

*Q: Can this system handle 4K gaming in Barony?*

A: Yes, the combination produces 101.7 FPS at 4K High and 72.8 FPS at 4K Ultra. Even the most demanding preset remains playable, though the Ultra setting dips below the 100 FPS threshold.

Q: How does the RTX 4070 compare to its nearest GPU rival?

A: The RTX 4070’s average benchmark score is 37283, which is 0.6% lower than the AMD Radeon RX Vega 56’s 37507. The difference is negligible, translating to no perceptible performance gap in real-world gaming.

Q: Is the CPU a bottleneck at any resolution?

A: The 1080p Low result of 470 FPS suggests the CPU limits performance at this setting, as the frame rate exceeds what most displays can refresh. At higher resolutions and settings, the GPU becomes the primary constraint.

Q: What is the frame rate difference between Medium and Ultra at 1440p?

A: At 2560x1440, Medium delivers 221.2 FPS while Ultra produces 138 FPS, a difference of 83.2 FPS or roughly 38%. This gap indicates Ultra settings impose a significant additional burden.

Q: How does the 7600X’s single-thread performance compare to its multi-thread score?

A: The CPU scores 3406 in Cinebench R23 single-core and 24128 in multi-core, showing a roughly 7x scaling factor. This strong single-thread result benefits Barony, which relies on per-frame logic typical of roguelikes.

Measured FPS Breakdown

The full dataset shows consistent performance scaling across all resolutions and settings. At 1920x1080, the system delivers 301.3 FPS on High, 350.4 FPS on Medium, 215 FPS on Ultra, and 470 FPS on Low. The spread between Low and Ultra is 255 FPS, highlighting how dramatically settings impact frame rates at this resolution.

Moving to 2560x1440, the figures are 188.8 FPS on High, 221.2 FPS on Medium, 138 FPS on Ultra, and 297 FPS on Low. The gap between Low and Ultra narrows to 159 FPS, suggesting the GPU is beginning to exert more influence. The 1440p Medium result of 221.2 FPS is notable, as it exceeds the 1080p Ultra figure of 215 FPS, indicating that resolution has less impact than graphics preset in this mid-range.

At 3840x2160, the system produces 101.7 FPS on High, 116.1 FPS on Medium, 72.8 FPS on Ultra, and 154.6 FPS on Low. The 4K Medium result is particularly interesting, as it nearly matches the 1440p High figure of 188.8 FPS when scaled for pixel count. The 4K Ultra result of 72.8 FPS is the only sub-100 FPS measurement, and it represents a 66% reduction from the 1080p Ultra figure of 215 FPS.

Across all configurations, the pattern is consistent: Low settings always produce the highest frame rates, followed by Medium, then High, with Ultra trailing. The relative ordering never changes, though the absolute differences grow with resolution. At 1080p, Low beats Ultra by 118.5%; at 1440p, the gap shrinks to 115.2%; at 4K, it expands to 112.4%. This consistency indicates that Barony scales predictably with both resolution and quality settings.

GPU Role

The NVIDIA GeForce RTX 4070 plays a central role in determining Barony’s performance, particularly at higher resolutions and preset levels. The GPU features 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth. This memory configuration is more than sufficient for a roguelike title, as the game’s asset sizes are modest compared to modern AAA releases.

The Ada Lovelace architecture, built on a 5 nm process at TSMC, contains 35,800 million transistors across a 294 mm² die. The GPU operates at a base clock of 1920 MHz and boosts to 2475 MHz, with memory running at 1313 MHz (21 Gbps effective). These clocks contribute to a pixel rate of 158.4 GPixel/s and a texture rate of 455.4 GTexel/s, which translate directly into fill-rate capabilities that benefit Barony’s 2D-rendered environments.

The RTX 4070’s 5888 shading units, 184 texture mapping units, and 64 ROPs provide substantial compute resources. Its FP32 performance of 29.15 TFLOPS ensures that even the most complex shader effects at Ultra settings are handled without issue. The GPU’s 46 RT cores and 184 tensor cores are present, though Barony does not appear to utilize ray tracing or DLSS based on the measured results.

The RTX 4070 ranks in the 81st percentile of all GPUs, with an average benchmark score of 37283. Its nearest rival, the AMD Radeon RX Vega 56, scores 37507, a negligible 0.6% difference despite the architecture generation gap. The NVIDIA GeForce MX570 A trails by 1.9% at 38008, while the RTX 4080 Mobile is 2.2% behind at 38135. These comparisons underscore that the RTX 4070 delivers desktop-class performance that easily handles Barony’s requirements.

The GPU’s role becomes more pronounced at 4K, where the frame rate difference between Low and Ultra settings is 81.8 FPS (154.6 vs 72.8). This 53% reduction demonstrates that while the RTX 4070 is capable at 4K, the most demanding settings push it near its limits. At 1080p, the GPU is rarely the bottleneck, as evidenced by the 470 FPS Low result, which is more likely constrained by CPU single-thread performance.