Barony
This combination provides smooth gameplay with an average of 109 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 50 | 58 | 78 |
| 1440p QHD | 68 | 95 | 110 | 149 |
| 1080p Full HD | 108 | 150 | 175 | 235 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 7400F + NVIDIA GeForce GTX 1070, In-Depth Analysis
Barony is a roguelike that, on paper, should not be demanding, but the measured frame rates for this specific configuration—the AMD Ryzen 5 7400F paired with the NVIDIA GeForce GTX 1070—tell a more nuanced story. The data shows a system that is capable of high refresh rates at 1080p, but one where the GPU's age becomes increasingly apparent as resolution climbs. The combination ranks 2417 out of 2935 tested combos in this game, placing it in the lower third of all pairings, which suggests that while playable, this is not a high-end setup for Barony. The following analysis breaks down exactly what each component contributes to these results.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael. It operates on the AMD Socket AM5 platform and is built on a 5 nm process by TSMC. Its base clock is 3.70 GHz, with a boost clock of 4.70 GHz, and it has a 65 W TDP. The cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and a shared 32 MB of L3 cache. This is a modern, capable desktop CPU with a dual-channel DDR5 memory bus providing 83.2 GB/s of bandwidth.
In the context of Barony, the CPU's job is to handle game logic, entity updates, and the procedural generation that is central to the roguelike genre. The benchmark results for this chip are strong. In Cinebench R23, it scores 21765 points in multi-core and 3072 points in single-core. Its Passmark single-thread score is 3689, and its multithread score is 25645. These numbers indicate that the Ryzen 5 7400F has ample headroom for a game like Barony, which is unlikely to fully utilize all 12 threads. The single-core performance is particularly relevant, as many roguelikes rely heavily on a single main thread for simulation logic.
When looking at the measured FPS, the CPU appears to be more than sufficient. At 1080p with Low settings, the system achieves 235 FPS, which is a very high frame rate. Even at 1440p Low, it hits 149 FPS. These numbers suggest that the CPU is not the primary bottleneck at these settings; the GPU is handling the rendering load, and the CPU is keeping up without issue. The Ryzen 5 7400F's percentile rank of 83 among all CPUs shows it is a strong performer, sitting just ahead of the Intel Core i5-14600T by 0.1% and the Intel Core Ultra 7 155H by 0.2% in average benchmark score. It trails the AMD Ryzen 7 PRO 6850H by 0.2%. This places it in a competitive tier where CPU-bound scenarios are unlikely to be a problem for a game of Barony's scope.
The data shows that the CPU is not the limiting factor. The consistent scaling from Low to Ultra settings at each resolution points to the GPU being the primary constraint. The 7400F's 6 cores and 12 threads, combined with its high boost clock, provide a solid foundation. The L3 cache of 32 MB is also beneficial for keeping frequently accessed game data close to the cores. In practical terms, for Barony, this CPU will sit idle waiting for the GTX 1070 to finish rendering frames, especially at higher resolutions. The only scenario where the CPU might become more relevant is if the game's logic becomes exceptionally heavy with many entities on screen, but the benchmark data does not indicate this is happening here.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce GTX 1070 is a Pascal-architecture GPU built on a 16 nm process. It features 8 GB of GDDR5 memory on a 256-bit bus, providing a bandwidth of 256.3 GB/s. The core clocks are 1506 MHz base and 1683 MHz boost. It has 1920 shading units, 120 texture mapping units, and 64 ROPs. Its compute power is rated at 6.463 TFLOPS for FP32. The card is end-of-life and was released in 2016, making it a veteran component in 2025.
The GTX 1070's role in Barony is significant. The measured FPS data shows that it is the main determinant of performance. At 1080p, the card delivers 235 FPS on Low, 175 FPS on Medium, 150 FPS on High, and 108 FPS on Ultra. This is a clear demonstration of the GPU's scaling with settings. The 8 GB of VRAM is likely sufficient for Barony at 1080p, but at higher resolutions with Ultra settings, it might become a factor. The card's percentile rank is 47, meaning it is squarely in the middle of all GPUs, which is expected for a card of its age.
Comparing to its nearest rivals, the GTX 1070 is positioned very closely to the AMD FirePro W5000, with the latter being 0.2% faster. It is also 0.5% slower than the NVIDIA Quadro M2000M and 0.6% faster than the NVIDIA Tesla M10. This shows that in raw benchmark terms, the GTX 1070 is a known quantity with performance that has been surpassed by newer entries but remains functional for less demanding titles.
The benchmark results for the GPU show a score of 13498 in Passmark G3D, which is a measure of general 3D performance. In DirectX 11, it scores 100, and in DirectX 12, it scores 48. This is notable because Barony, being a 2015 game, likely uses an older DirectX version. The GTX 1070's strong DirectX 11 performance (a score of 100) is a good indicator for this game. The card's Vulkan score of 22121 suggests it can handle modern APIs, but the game's age means it probably does not use them. The GPU's 150 W TDP and suggested 450 W PSU are standard for its class, but the performance data shows it is clearly the bottleneck in this system for Barony at higher resolutions.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data reveals a classic GPU-bound scaling pattern. At 1080p, the system is capable of very high frame rates, but these drop significantly as resolution increases to 1440p and then to 4K. This is a textbook sign that the GTX 1070 is the limiting component, not the Ryzen 5 7400F.
Looking at the High preset, the average FPS at 1080p is 150. At 1440p, it drops to 95, and at 4K, it falls to 50. This represents a 37% drop from 1080p to 1440p, and a further 47% drop from 1440p to 4K. The total drop from 1080p to 4K is 67%. This steep decline is indicative of the GPU's fillrate and bandwidth limits being pushed hard at higher resolutions.
The Low preset shows a similar trend. At 1080p, the system hits 235 FPS. At 1440p, it drops to 149 FPS (a 37% reduction), and at 4K, it falls to 78 FPS (a 48% reduction from 1440p). The 4K Low setting still delivers a playable 78 FPS, but the scaling is consistent with a GPU that is running out of pixel processing power.
The Medium and Ultra presets follow the same pattern. For Medium, the FPS goes from 175 at 1080p to 110 at 1440p and then to 58 at 4K. For Ultra, it goes from 108 at 1080p to 68 at 1440p and then to 36 at 4K. The 4K Ultra result is the only one that drops below 40 FPS, making it not a smooth experience.
This scaling behavior confirms that the CPU is not holding the system back. If the CPU were the bottleneck, we would expect to see similar FPS at 1080p and 1440p, with a drop only at 4K. Instead, the FPS drops consistently at each resolution step, which is a direct result of the GPU having to render more pixels. The Ryzen 5 7400F has enough headroom to feed the GTX 1070 at all resolutions, but the GPU simply cannot keep up with the increased pixel count. The data shows that for a smooth experience, users should target 1080p or 1440p, where the GTX 1070 can maintain high frame rates.
FAQ
Q: Is the AMD Ryzen 5 7400F a good match for the GTX 1070 in Barony?
A: The data shows the CPU is not a bottleneck. The FPS scales consistently with resolution, indicating the GPU is the limiting factor. The Ryzen 5 7400F's single-thread score of 3072 in Cinebench R23 is more than adequate for this game.
Q: What is the best resolution to play Barony with this setup?
A: Based on the measured FPS, 1080p is the sweet spot. It delivers 150 FPS on High and 108 FPS on Ultra. 1440p is also viable, with 95 FPS on High and 68 FPS on Ultra, but 4K should be avoided for high settings.
Q: How does the GTX 1070 perform at 4K in Barony?
A: The GTX 1070 can handle 4K at 50 FPS on High, but this drops to 36 FPS on Ultra. For a consistent experience, Low settings at 4K (78 FPS) are preferable to Ultra.
Q: Will the 8 GB of VRAM in the GTX 1070 be sufficient for Barony?
A: The measured data suggests it is. There are no signs of texture pop-in or stuttering that would indicate VRAM limits. However, the card's overall compute power, not VRAM, is what limits performance at higher resolutions.
Q: How does this CPU compare to its closest rivals?
A: The Ryzen 5 7400F has an average benchmark score of 32750. This is 0.1% higher than the Intel Core i5-14600T and 0.2% higher than the Intel Core Ultra 7 155H. It is 0.2% lower than the AMD Ryzen 7 PRO 6850H.
Q: Is the GTX 1070 a weak link in this system?
A: Yes, the GPU is the clear bottleneck. Its percentile rank of 47 places it in the middle of all GPUs, and its performance scaling with resolution confirms it is the component that prevents higher frame rates at 1440p and 4K.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The following is the complete set of measured average FPS data for this configuration.
At 1920x1080, the system performs as follows:
- Low: 235 FPS average.
- Medium: 175 FPS average, with a minimum of 149 FPS and a maximum of 201 FPS.
- High: 150 FPS average.
- Ultra: 108 FPS average.
At 2560x1440, the performance drops:
- Low: 149 FPS average.
- Medium: 110 FPS average, with a minimum of 94 FPS and a maximum of 127 FPS.
- High: 95 FPS average.
- Ultra: 68 FPS average.
At 3840x2160, the GPU is heavily taxed:
- Low: 78 FPS average.
- Medium: 58 FPS average, with a minimum of 49 FPS and a maximum of 66 FPS.
- High: 50 FPS average.
- Ultra: 36 FPS average.
These numbers show a clear hierarchy. The Medium preset at each resolution provides the only data points with min/max FPS recorded. At 1080p, the Medium preset has a 149 FPS minimum, which is still very smooth. At 1440p, the Medium minimum is 94 FPS, which is acceptable. At 4K, the Medium minimum is 49 FPS, which is borderline. The Ultra preset at 4K is the only configuration that falls below 40 FPS, making it the least desirable option.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS, the best experience depends on the user's target resolution and preference for frame rate versus visual fidelity.
For 1080p, the High preset at 150 FPS is the recommended choice. It provides a significant visual upgrade over Medium (175 FPS) while still maintaining a frame rate well above 144 Hz, which is ideal for high-refresh-rate monitors. The Ultra preset at 108 FPS is also viable, but the drop from 150 to 108 FPS is substantial for a gain in settings that may not be noticeable in a roguelike with simple graphics. If the user prioritizes maximum smoothness, Low at 235 FPS is an option, but High offers a better balance.
For 1440p, the High preset at 95 FPS is the best balance. It is above 60 FPS, which is the standard for smooth gameplay, and provides good visual quality. The Medium preset at 110 FPS is a bit faster, but the step up to High is worth it for the improved detail. The Ultra preset at 68 FPS is playable but not as fluid. For users with a 144 Hz monitor, Medium at 110 FPS might be preferable, but for most, High is the sweet spot.
For 4K, the data suggests that High settings are not ideal, with only 50 FPS. The Medium preset at 58 FPS is the best playable option, but it is still not a high-refresh-rate experience. The Low preset at 78 FPS is smoother but sacrifices visual quality. Given that 4K Ultra drops to 36 FPS, it should be avoided. For 4K, the recommendation is to use Low or Medium settings, accepting that this GPU is not designed for high-fidelity 4K gaming in this title. The Medium preset's recorded minimum of 49 FPS means it will occasionally dip below 50 FPS, which could be noticeable.
In summary, the data supports 1080p High as the optimal experience for this configuration, with 1440p High being a strong alternative for those with higher-resolution monitors. 4K should be reserved for users who prioritize resolution over frame rate and are willing to use lower presets. The Ryzen 5 7400F provides the headroom, but the GTX 1070's age is evident at higher resolutions.
Hardware Specifications
AMD Ryzen 5 7400F
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce GTX 1070 in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 78.0 |
| 3840x2160 | Medium | 58.0 |
| 3840x2160 | High | 50.0 |
| 3840x2160 | Ultra | 36.0 |
| 2560x1440 | Low | 149.0 |
| 2560x1440 | Medium | 110.0 |
| 2560x1440 | High | 95.0 |
| 2560x1440 | Ultra | 68.0 |
| 1920x1080 | Low | 235.0 |
| 1920x1080 | Medium | 175.0 |
| 1920x1080 | High | 150.0 |
| 1920x1080 | Ultra | 108.0 |
Barony with GTX 1070 + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.