Barony
This combination delivers exceptional performance with an average of 227 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 76 | 106 | 124 | 167 |
| 1440p QHD | 146 | 204 | 237 | 319 |
| 1080p Full HD | 231 | 323 | 374 | 417 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 2600 + AMD Radeon RX 7900 XT, In-Depth Analysis
The AMD Ryzen 5 2600 and AMD Radeon RX 7900 XT pairing in Barony produces a fascinating bottleneck dynamic. At 1080p, the combination delivers over 400 FPS on Low settings, but the scaling curve reveals a system that is primarily constrained by the CPU at lower resolutions and by the GPU at higher ones. The data indicates that this pairing is capable of extreme frame rates that far exceed the refresh rate of most displays, making the choice of settings and resolution a matter of consistency rather than raw playability.
Resolution Scaling
The measured FPS data for this combo shows a steep and predictable decline as resolution increases, but the rate of that decline is not uniform across all settings. At 1080p with Low settings, the average frame rate is 417 FPS. Moving to 1440p Low drops this to 319 FPS, a 23.5% reduction. At 4K Low, the average falls to 167 FPS, which is a 47.6% drop from the 1440p figure and a 60% drop from the 1080p baseline. This pattern indicates that at Low settings, the workload scales heavily with pixel count, which points toward the GPU becoming the primary limiting factor at higher resolutions.
However, the scaling behavior changes when looking at higher quality presets. On Ultra settings, the average FPS is 231 at 1080p, 146 at 1440p, and 76 at 4K. The transition from 1080p to 1440p on Ultra represents a 36.8% performance loss, while the jump from 1440p to 4K on Ultra is a 47.9% loss. This steeper scaling curve at Ultra settings suggests that the GPU is being pushed harder by the increased graphical complexity, making it the dominant bottleneck even at 1080p. The gap between Low and Ultra at 1080p is 186 FPS, but at 4K that gap narrows to just 91 FPS, which further confirms that the GPU is the limiting component as resolution climbs.
The Medium preset provides the most complete data set, including minimum and maximum frame rates. At 1080p Medium, the average is 374 FPS with a minimum of 318 FPS and a maximum of 430 FPS. At 1440p Medium, the average drops to 237 FPS, with a minimum of 202 and a maximum of 273. At 4K Medium, the average is 124 FPS, with a minimum of 105 and a maximum of 143. The consistency of the frame times, as evidenced by the relatively narrow min-max ranges, indicates that the system is not experiencing severe stuttering at any resolution. The fact that the 4K Medium minimum of 105 FPS is still well above 60 FPS demonstrates that this combo has substantial headroom even at the highest resolution tested.
CPU Role
The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, based on the Zen architecture. It has a base clock of 3.40 GHz and a boost clock of 3.90 GHz. In the context of Barony, a roguelike title, the CPU's role is primarily to handle game logic, entity updates, and draw call submission. The benchmark results for this CPU show a solid but not exceptional performance profile. Its Passmark single-thread score is 2239, and its Geekbench single-core score is 1154. These numbers indicate that per-core performance is adequate for the game's requirements.
The combination of 6 cores and 12 threads is generally sufficient for modern gaming, and Barony is not a title known for heavy multi-threading. However, the data suggests that the CPU does become a limiting factor at 1080p. The fact that the 1080p Low preset achieves 417 FPS while the 4K Low preset achieves 167 FPS shows that the CPU is capable of feeding the GPU with a massive number of frames at lower resolutions. The difference in FPS between 1080p and 4K on Low settings is not purely a GPU limitation; the CPU is likely hitting its own ceiling in terms of frame generation. The Ryzen 5 2600's Passmark multi-thread score of 13160 and Cinebench R15 multi-core score of 1248 are respectable, but they are not in the same league as the top-tier processors that would be needed to sustain frame rates beyond 400 FPS without any GPU pressure.
The CPU's percentile ranking of 75th among all tested CPUs indicates that it is better than the majority of processors in the database. Its average benchmark score of 21484 places it in close competition with several other processors. The nearest rivals include the Intel Core Ultra 5 228V, which is 0.2% faster, and the Intel Core i9-11900H, which is 0.5% faster. The AMD EPYC 9454 is 1.2% slower, and the Intel Xeon D-1746TER is 0.7% slower. These small delta percentages show that the Ryzen 5 2600 is in a tightly contested mid-range performance tier. In Barony, the practical impact of this CPU performance is that the system will deliver exceptionally high frame rates, but the CPU may prevent the system from reaching the absolute maximum potential of the GPU at 1080p.
FAQ
*Q: What is the highest average frame rate achieved by this combo in Barony?*
A: The highest average frame rate recorded is 417 FPS, which occurs at 1920x1080 resolution with Low settings.
Q: Does this system maintain 60 FPS at 4K resolution?
A: Yes. The lowest average frame rate recorded at 3840x2160 is 76 FPS on Ultra settings, with the Medium preset averaging 124 FPS and the Low preset reaching 167 FPS. All 4K results are well above the 60 FPS threshold.
Q: How does the Ryzen 5 2600 compare to its nearest rival in terms of overall benchmark score?
A: The Ryzen 5 2600 has an average benchmark score of 21484. The Intel Core Ultra 5 228V is its closest rival with a score of 21440, which is a 0.2% difference. The Intel Core i9-11900H is 0.5% faster, while the AMD EPYC 9454 is 1.2% slower.
Q: What is the frame rate difference between 1080p and 4K on High settings?
A: At 1920x1080 with High settings, the average frame rate is 323 FPS. At 3840x2160 with High settings, the average frame rate drops to 106 FPS. This represents a 67.2% reduction in performance when moving from 1080p to 4K.
Q: Is there a significant performance gap between the Low and Ultra presets at 1440p?
A: Yes. At 2560x1440, the Low preset averages 319 FPS, while the Ultra preset averages 146 FPS. The gap of 173 FPS represents a 54.2% performance loss when switching from Low to Ultra settings.
Q: What is the minimum frame rate recorded for this combo?
A: The only minimum frame rates recorded are for the Medium preset. At 1920x1080, the minimum is 318 FPS. At 2560x1440, the minimum is 202 FPS. At 3840x2160, the minimum is 105 FPS. No minimum frame rates were recorded for the Low, High, or Ultra presets.
Settings Recommendations
Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate consistency. For 1080p users, the Ultra preset is the clear recommendation. The average frame rate of 231 FPS is more than sufficient for any high-refresh-rate monitor, and the extra graphical fidelity is worth the 186 FPS drop from the Low preset. The High preset at 323 FPS offers a middle ground, but the Ultra preset provides a more complete visual experience without any risk of dropping below playable frame rates.
For 1440p, the High preset is the best balance. The average frame rate of 204 FPS is excellent, and the step down to Medium at 237 FPS does not provide a significant enough visual improvement over High to justify the 33 FPS loss. The Ultra preset at 146 FPS is still playable, but given that the game is a roguelike where consistent frame times can be important, the High preset offers a better safety margin. The Medium preset at 237 FPS is a viable option for those who prioritize frame rate above all else, but the High preset is the sweet spot.
At 4K, the Medium preset is the recommended choice. With an average of 124 FPS and a minimum of 105 FPS, it provides a smooth experience that is well above the 60 FPS standard. The High preset at 106 FPS is also acceptable, but the Medium preset's higher average and recorded minimum frame rate offer more headroom for demanding scenes. The Ultra preset at 76 FPS is playable but leaves little room for frame time spikes. The Low preset at 167 FPS is unnecessary, as the visual trade-offs are too significant for a game that can run well at Medium settings. The Medium preset at 4K provides the best combination of visual quality and performance stability.
How This Combo Ranks
The AMD Ryzen 5 2600 and AMD Radeon RX 7900 XT combination is ranked 826th out of 3717 tested combos in Barony. This places it in the top 22.2% of all tested configurations, which is a strong showing for a system pairing a mid-range 2018 CPU with a high-end 2022 GPU. The rank indicates that this combo outperforms the vast majority of systems in this specific game, but it also shows that there are over 800 combinations that deliver higher average frame rates.
The ranking is particularly notable given the CPU's age. The Ryzen 5 2600 was released in 2018, and its performance has been surpassed by many newer processors. However, the RX 7900 XT is a powerful GPU that can compensate for some CPU limitations. In a game like Barony, which is not extremely demanding, the GPU's raw power is able to push frame rates to very high levels even with an older CPU. The fact that this combo ranks in the top quarter of all tested systems demonstrates that the RX 7900 XT is doing the heavy lifting, and that the Ryzen 5 2600 is not holding the system back to a significant degree at most resolutions and settings.
The data shows that the combo's ranking is consistent with its performance profile. The GPU's average benchmark score of 13745 places it in the 55th percentile of all GPUs, while the CPU's average score of 21484 places it in the 75th percentile of all CPUs. The combination of a slightly above-average GPU and a well-above-average CPU results in a system that is well-suited for high-refresh-rate gaming. The 826th rank out of 3717 combos reflects the overall balance of this pairing, even though the CPU is clearly the older component.
Measured FPS Breakdown
The complete measured FPS data for this combo is as follows:
3840x2160 (4K)
- Low: average 167 FPS
- Medium: average 124 FPS, minimum 105 FPS, maximum 143 FPS
- High: average 106 FPS
- Ultra: average 76 FPS
2560x1440 (1440p)
- Low: average 319 FPS
- Medium: average 237 FPS, minimum 202 FPS, maximum 273 FPS
- High: average 204 FPS
- Ultra: average 146 FPS
1920x1080 (1080p)
- Low: average 417 FPS
- Medium: average 374 FPS, minimum 318 FPS, maximum 430 FPS
- High: average 323 FPS
- Ultra: average 231 FPS
The data reveals a clear hierarchy across resolutions and settings. At 1080p, the system is capable of producing frame rates that are far beyond what any current display can show. Even the Ultra preset at 231 FPS exceeds the refresh rate of most high-end gaming monitors. At 1440p, the frame rates remain exceptionally high, with the Low preset nearly hitting 320 FPS. At 4K, the system still delivers playable frame rates, with the Low preset achieving 167 FPS and the Medium preset maintaining a solid 124 FPS average. The Ultra preset at 4K is the only configuration that drops below 100 FPS, but at 76 FPS it is still smoother than what most consoles provide. The minimum frame rates recorded for the Medium preset are consistently high, indicating that the system maintains stable performance even during intense gameplay moments. Overall, this combo offers exceptional performance across the board, with the only real limitation being the CPU's ability to push frames at 1080p Low settings.
Hardware Specifications
AMD Ryzen 5 2600
AMD Radeon RX 7900 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + AMD Radeon RX 7900 XT in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 167.0 |
| 3840x2160 | Medium | 124.0 |
| 3840x2160 | High | 106.0 |
| 3840x2160 | Ultra | 76.0 |
| 2560x1440 | Low | 319.0 |
| 2560x1440 | Medium | 237.0 |
| 2560x1440 | High | 204.0 |
| 2560x1440 | Ultra | 146.0 |
| 1920x1080 | Low | 417.0 |
| 1920x1080 | Medium | 374.0 |
| 1920x1080 | High | 323.0 |
| 1920x1080 | Ultra | 231.0 |
Barony with Ryzen 5 2600 + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 7900 XT + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RX 7900 XT
Explore FPS benchmarks for other games using this same hardware combination.