Archeage

The Intel Core Ultra 7 270K Plus paired with the AMD Radeon RX 9060 delivers a playable but heavily resolution-dependent experience in Archeage. The data shows a system where the 8 GB RX 9060 becomes the primary bottleneck as pixel count rises, while the 24-thread CPU provides ample headroom for the MMO’s logic. This combination ranks in the 41st percentile of tested combos for this title, indicating a mid-pack performance tier that favors 1080p and 1440p gaming over 4K.

Resolution Scaling

The measured FPS data reveals a steep performance cliff as resolution increases, a clear sign that the GPU is the limiting component at higher settings. At 1080p with Low settings, the combo produces an average of 142 FPS, which drops to 95 FPS at 1440p and further to 55 FPS at 4K. This represents a 33% reduction from 1080p to 1440p and a 61% reduction from 1080p to 4K, showing that the RX 9060’s rendering throughput falls off sharply with pixel count.

The scaling pattern becomes more pronounced at higher quality presets. At Ultra settings, the average frame rate plummets from 58 FPS at 1080p to 39 FPS at 1440p and finally to 23 FPS at 4K. The 4K Ultra result is below playable thresholds, while the 1080p Ultra figure remains acceptable for a slower-paced MMO. Interestingly, the gap between Low and Ultra at 1080p is 84 FPS, but at 4K that same gap narrows to just 32 FPS, suggesting that the GPU saturates at 4K regardless of the preset, minimizing the impact of quality reductions.

The Medium preset provides the most complete data with min and max FPS values, offering insight into frame pacing. At 1080p Medium, the system averages 126 FPS with a range of 107 to 145 FPS, showing tight frame delivery. At 1440p Medium, the average is 85 FPS with a range of 72 to 98 FPS, and at 4K Medium, it falls to 49 FPS with a range of 41 to 56 FPS. The consistency of these ranges indicates that the CPU is not causing stutter; rather, the GPU’s raw throughput dictates the averages. The scaling from 1080p to 1440p at Medium is a 33% drop, while 1440p to 4K is a 42% drop, confirming that the transition to 4K is disproportionately taxing.

GPU Role

The AMD Radeon RX 9060, built on the RDNA 4.0 architecture with the Navi 44 chip, has a boost clock of 2990 MHz and a game clock of 2400 MHz. Its 8 GB of GDDR6 memory on a 128-bit bus delivers a bandwidth of 288.0 GB/s, a figure that proves insufficient for Archeage at 4K Ultra, where the average FPS collapses to 23. The memory capacity is the likely culprit, as the 8 GB frame buffer becomes saturated with high-resolution textures, forcing the GPU to swap data and tanking performance.

The GPU’s benchmark scores place it in the 59th percentile of all GPUs, with an average benchmark score of 16014. Its nearest rival is the NVIDIA GeForce RTX 3060 Ti, which scores 16129, a delta of -0.7%, meaning the RX 9060 is essentially neck-and-neck with that older card in synthetic tests. In Archeage specifically, the GPU’s limits are exposed at 4K, where even Low settings only manage 55 FPS. This suggests that the game’s draw calls and shader complexity at 4K exceed what the 1792 shading units and 64 ROPs can handle efficiently.

The RX 9060’s 21.43 TFLOPS of FP32 compute is respectable, but the game’s performance at 1440p High (58 FPS) versus 1080p High (86 FPS) shows a 33% penalty, which aligns with the pixel count increase from 2.07 million to 3.69 million pixels. This linear scaling indicates that the GPU is compute-bound rather than bandwidth-bound at these settings. However, the jump from 1440p High to 4K High (33 FPS) is a 43% drop, which is steeper than the 44% pixel increase, pointing to the 8 GB memory limit as the additional constraint at 4K.

FAQ

Q: Can this combo handle Archeage at 4K?

A: At 4K Medium, the average FPS is 49 with a range of 41 to 56, which is playable. At 4K High, it drops to 33 FPS, and at 4K Ultra, it falls to 23 FPS, making those settings unsuitable for smooth gameplay.

Q: What is the best resolution for this CPU/GPU pair?

A: The data shows 1440p Medium yielding 85 FPS average with a range of 72 to 98 FPS, offering a strong balance between visual quality and frame rate. 1080p Low produces 142 FPS for maximum smoothness, but 1440p Medium is the sweet spot.

Q: How does the RX 9060 compare to its nearest rival in synthetic benchmarks?

A: The RX 9060 has an average benchmark score of 16014, which is 0.7% lower than the NVIDIA GeForce RTX 3060 Ti’s score of 16129. It is also 1% faster than the AMD Radeon RX 7700’s 15852 score.

Q: Is the CPU or GPU the bottleneck in this game?

A: The resolution scaling data indicates the GPU is the limiting factor. FPS drops significantly from 1080p to 4K across all settings, while the CPU’s 24 threads and high single-core performance (5068 in Passmark) provide no such scaling bottlenecks.

Q: What frame rates can I expect at 1080p with High settings?

A: The measured average is 86 FPS at 1080p High. This is below the 1080p Medium average of 126 FPS, but still comfortably playable for an MMORPG.

Q: Does the combo rank well among other tested configurations?

A: The combo ranks 2174 out of 3708 tested combos, placing it in the lower half of all configurations for Archeage. This suggests it is not a top-tier performer but is far from the bottom.

Settings Recommendations

The measured data points to Medium settings as the optimal choice for this combo. At 1080p Medium, the system delivers an average of 126 FPS with a minimum of 107 FPS, ensuring fluid gameplay even in crowded areas. The jump from Low to Medium at 1080p costs only 16 FPS (from 142 to 126), while the jump from Medium to High costs 40 FPS (from 126 to 86). This makes Medium the highest preset that maintains a triple-digit average at 1080p.

For 1440p users, Medium is again the recommended preset, producing an 85 FPS average with a 72 FPS minimum. This keeps the frame rate above the 60 FPS threshold for most displays, whereas High at 1440p drops to 58 FPS average, risking dips below 60 in intense scenarios. The 4K Medium result of 49 FPS is borderline, but it is the only 4K preset that exceeds 30 FPS, making it the only viable option for 4K displays, though players should expect a less smooth experience.

Low settings are only advisable for competitive play or when aiming for the highest possible frame rates, as they yield 142 FPS at 1080p and 95 FPS at 1440p. Ultra settings are not recommended at any resolution, as the 4K Ultra result of 23 FPS is unplayable, and even 1080p Ultra at 58 FPS offers no advantage over High at 86 FPS. The data clearly favors Medium for a consistent experience, with High as a fallback for 1080p users who prioritize visuals over frame rate.

How This Combo Ranks

In the grand scheme of tested hardware combinations for Archeage, this pairing sits at rank 2174 out of 3708 total combos. This places it in the 41st percentile, meaning 58.6% of tested configurations achieve better performance in this specific game. The rank reflects the RX 9060’s mid-tier standing, as the GPU’s overall percentile is 59, but the game’s particular demands on VRAM and shader throughput drag the combo down.

The CPU, Intel Core Ultra 7 270K Plus, is a high-end part with a 96th percentile ranking among all CPUs, but its power is largely underutilized in Archeage. The game’s frame rates scale with resolution, indicating that the GPU is the sole determinant of the combo’s rank. The CPU’s nearest rivals in overall benchmark scores include the Intel Xeon 6520P, which matches the Ultra 7’s average score of 93785, and the AMD EPYC 4564P, which is 1.5% faster with a score of 95183. These rival comparisons are irrelevant to in-game performance, though, as the RX 9060’s 8 GB memory capacity is the primary constraint in Archeage.

The combo’s rank is consistent with the GPU’s position relative to its rivals. The RX 9060 is 0.7% slower than the RTX 3060 Ti, which is a common mid-range card, and 1% faster than the RX 7700. This places the combo in a crowded mid-field of hardware, capable of 60+ FPS at 1080p and 1440p Medium, but not competitive with high-end configurations that would rank in the top 10% of the 3708 tested combos. Players seeking higher rankings would need a GPU with more VRAM and bandwidth, as the CPU clearly has headroom to spare.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best performance. Low settings produce an average of 142 FPS, Medium produces 126 FPS with a range of 107 to 145 FPS, High produces 86 FPS, and Ultra produces 58 FPS. The data shows a clear hierarchy: Low and Medium are the only presets that exceed 100 FPS average, while High and Ultra sacrifice significant frame rates for visual fidelity.

At 2560x1440, performance drops proportionally. Low settings average 95 FPS, Medium averages 85 FPS with a range of 72 to 98 FPS, High averages 58 FPS, and Ultra averages 39 FPS. The Medium preset remains the most balanced, staying above 72 FPS at minimum. High at 1440p matches the 4K Medium average of 49 FPS, but with a wider margin to 60 FPS.

At 3840x2160, the GPU struggles. Low settings average 55 FPS, Medium averages 49 FPS with a range of 41 to 56 FPS, High averages 33 FPS, and Ultra averages 23 FPS. Only Low and Medium exceed 30 FPS, with Medium being the only preset that offers a consistent experience above 40 FPS. The Ultra result is the worst measured, indicating that the 8 GB VRAM and 128-bit bus are overwhelmed by 4K textures and effects. Across all resolutions, the Medium preset provides the most stable frame ranges, with min FPS values that stay within 15% of the average, confirming its suitability for this hardware.