Archeage
This combination provides smooth gameplay with an average of 93 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 32 | 47 | 68 | 73 |
| 1440p QHD | 50 | 79 | 114 | 128 |
| 1080p Full HD | 77 | 113 | 164 | 167 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with Intel Core i5-10400F + AMD Radeon RX 7800 XT, In-Depth Analysis
The Intel Core i5-10400F paired with the AMD Radeon RX 7800 XT delivers a broadly playable experience in Archeage, but the data reveals a system that is heavily constrained by graphics load at higher resolutions and settings. The measured frame rates show a clear pattern: the combo excels at 1080p, becomes demanding at 1440p, and struggles to maintain smooth performance at 4K, particularly when settings are pushed beyond Medium. This analysis breaks down the measured FPS, explores the scaling behavior, and examines what the underlying hardware specifications reveal about these results.
Resolution Scaling
The transition from 1920x1080 to 3840x2160 reveals a steep performance curve that points directly at the GPU as the primary bottleneck. At High settings, the average frame rate drops from 113.0 FPS at 1080p to 78.5 FPS at 1440p, then falls sharply to 46.5 FPS at 4K. That represents a 31% reduction from 1080p to 1440p, followed by a 41% further drop when moving to 4K. The scaling is not linear — the 4K penalty is disproportionately severe, indicating that the RX 7800 XT’s memory bandwidth of 624.1 GB/s and 16 GB of GDDR6 are being saturated by the pixel throughput required at 3840x2160.
The Low preset tells a similar story but with a much higher absolute ceiling. At Low, the combo achieves 167.2 FPS at 1080p, 127.9 FPS at 1440p, and 73.1 FPS at 4K. The 4K figure is still above the 60 FPS threshold, which suggests that when the render workload is minimized, the GPU can keep up. However, the fact that 4K Low (73.1 FPS) is slower than 1080p Ultra (77.1 FPS) is telling: even at the lowest settings, resolution scaling remains the dominant factor, and the CPU is not the limiting component here.
The gap between Medium and High is also informative. At 1080p, Medium runs at 164.4 FPS versus High’s 113.0 FPS — a 45% difference. At 4K, that gap narrows to 67.5 FPS versus 46.5 FPS, a 45% difference as well. This consistency suggests that the performance delta between presets is largely driven by GPU workload, and the i5-10400F’s six cores and twelve threads are not introducing a variable that changes the scaling pattern. The data implies that for this MMORPG, the RX 7800 XT is the component that determines how far you can push resolution, not the processor.
Settings Recommendations
The measured rows indicate that Medium is the sweet spot for this combo across all resolutions. At 1920x1080, Medium delivers 164.4 FPS, which is nearly identical to Low’s 167.2 FPS — the visual uplift from Low to Medium costs only 2.8 FPS, an excellent trade. At 2560x1440, Medium drops to 113.7 FPS, still comfortably above 100 FPS and far smoother than High’s 78.5 FPS. Even at 4K, Medium manages 67.5 FPS, which is playable, whereas High falls to 46.5 FPS and Ultra becomes a slideshow at 31.8 FPS.
Ultra is clearly not viable for this pairing. At 1080p, Ultra yields 77.1 FPS, which is playable but 53% slower than Medium. At 1440p, Ultra drops to 50.3 FPS, and at 4K it hits 31.8 FPS — a frame rate that would feel stuttery in a fast-moving MMORPG environment. The data suggests that Ultra is designed for a more powerful GPU, and the RX 7800 XT, while capable, does not have enough headroom for this preset at higher resolutions.
For users prioritizing smoothness, Low at 1440p (127.9 FPS) or Medium at 1080p (164.4 FPS) are the best measured configurations. For those with a 4K display, Medium at 67.5 FPS is the only realistic option above the 60 FPS line. High is a middle ground that works at 1080p (113.0 FPS) and 1440p (78.5 FPS) but fails at 4K. The recommendation is to stick with Medium unless visual fidelity at the cost of frame rate is acceptable.
FAQ
Q: Does the Core i5-10400F bottleneck the Radeon RX 7800 XT in Archeage?
A: The data does not show a CPU bottleneck. At 1080p Low, the combo reaches 167.2 FPS, which is high but not extreme. The frame rate drops consistently as resolution increases, indicating the GPU is the limiting factor. The CPU’s 6 cores and 12 threads, with a boost clock of 4.30 GHz, are sufficient to feed the GPU in this MMORPG.
Q: What is the best preset for 1440p gaming with this combo?
A: Medium is the best measured preset at 2560x1440, delivering 113.7 FPS. This is 35 FPS higher than High (78.5 FPS) and 63 FPS higher than Ultra (50.3 FPS). Low runs at 127.9 FPS, but the visual quality trade-off is unnecessary when Medium is only 14 FPS slower.
Q: Can this system handle 4K resolution in Archeage?
A: Yes, but only at Low or Medium settings. At 4K Low, the combo averages 73.1 FPS, and at Medium it averages 67.5 FPS. High drops to 46.5 FPS, and Ultra falls to 31.8 FPS, both of which are below the 60 FPS threshold for smooth gameplay.
Q: How much faster is 1080p compared to 4K at the same settings?
A: At Low, 1080p (167.2 FPS) is 2.3 times faster than 4K (73.1 FPS). At Medium, the ratio is 2.4 times (164.4 FPS versus 67.5 FPS). At High, it is 2.4 times (113.0 FPS versus 46.5 FPS). The consistent ratio confirms that resolution scaling is the primary performance driver.
Q: Is the RX 7800 XT’s 16 GB VRAM sufficient for Archeage at any resolution?
A: The measured data shows no VRAM-related stutters or anomalies. The 16 GB of GDDR6 memory is more than enough for this 2014 MMORPG, even at 4K Ultra, where the frame rate is limited by compute and bandwidth rather than memory capacity.
Q: What frame rate can I expect at 1080p Ultra?
A: The measured average is 77.1 FPS. This is playable but notably lower than Medium (164.4 FPS) and High (113.0 FPS). The 70 FPS range suggests that Ultra settings impose a heavy load that this GPU handles with difficulty.
Measured FPS Breakdown
At 1920x1080, the combo delivers its best performance. Low settings produce an average of 167.2 FPS, Medium is nearly identical at 164.4 FPS, and High drops to 113.0 FPS. Ultra is the worst performer at 1080p, with 77.1 FPS. The gap between Low and Medium is just 2.8 FPS, indicating that Medium is essentially free performance-wise. The step to High costs 51 FPS, and the step to Ultra costs another 36 FPS.
At 2560x1440, the pattern holds but the numbers are lower. Low runs at 127.9 FPS, Medium at 113.7 FPS, High at 78.5 FPS, and Ultra at 50.3 FPS. The delta between Low and Medium is 14 FPS, which is still small enough to justify Medium. High represents a 45% drop from Medium, and Ultra is below 60 FPS, making it unsuitable for competitive play.
At 3840x2160, the system struggles. Low averages 73.1 FPS, Medium 67.5 FPS, High 46.5 FPS, and Ultra 31.8 FPS. Only Low and Medium clear the 60 FPS bar. High is borderline unplayable for fast-paced action, and Ultra is effectively a screenshot mode. The 4K results confirm that this combo is not designed for ultra-high-resolution gaming with high fidelity settings.
The overall trend shows that the RX 7800 XT has enough power for 1080p and 1440p, but the 4K results expose its limits. The GPU’s 96 ROPs and 233.3 GPixel/s pixel rate are likely the limiting factors at 4K, as the sheer number of pixels to fill overwhelms the render output units.
How This Combo Ranks
In the database of tested combinations for Archeage, this pairing ranks 650th out of 1727 combos. That places it in the 62nd percentile — above the median but not near the top. The rank suggests that while this is a competent setup, there are many other combinations that deliver higher frame rates in this specific game. The percentile rank of 62% indicates that roughly 38% of tested combos outperform it.
The combo’s position is likely influenced by the CPU’s modest multi-threaded performance. The i5-10400F has an average benchmark score of 14168, with a percentile of 73 among all CPUs. Its nearest rivals include the AMD EPYC 7552 (0.4% faster) and the AMD Ryzen 3 7320C (0.8% slower). These are not high-end gaming processors, which suggests the CPU is a mid-range part. The GPU, on the other hand, has an average score of 32619 and a percentile of 76, with rivals like the AMD FirePro S9300 X2 (0.2% faster) and the NVIDIA P104-100 (0.4% slower). The GPU is a stronger component relative to the CPU.
The rank of 650 out of 1727 implies that Archeage is sensitive to the combination of CPU and GPU, and this pairing is decent but not exceptional. The data shows that the GPU is doing most of the heavy lifting, and a stronger CPU might push this combo higher in the rankings.
CPU Role
The Intel Core i5-10400F is a 10th generation desktop processor with 6 cores and 12 threads. Its base clock is 2.90 GHz, and it boosts to 4.30 GHz. The processor has 12 MB of shared L3 cache and supports dual-channel DDR4 memory with a bandwidth of 42.7 GB/s. In Archeage, these specifications translate to a CPU that can handle the game’s MMO workloads without becoming the primary bottleneck.
Benchmark data shows the CPU scores 10297 in Cinebench R23 multi-core and 1453 in single-core. These are mid-range results, and the nearest rivals include the AMD EPYC 7552 (0.4% faster) and the Intel Core i5-8500 (1.1% slower). The single-thread score of 1453 is important for MMOs, which often rely on a single main thread for game logic. The 4.30 GHz boost clock helps in this regard, but the CPU’s overall performance is not top-tier.
In the measured FPS data, the CPU’s role is evident at 1080p Low, where the combo hits 167.2 FPS. This is high, but not limited by the CPU — if the CPU were the constraint, the frame rate would plateau regardless of resolution. Instead, the frame rate drops consistently with resolution, confirming that the GPU is the limiting factor. The i5-10400F has enough headroom to feed the RX 7800 XT in this game.
GPU Role
The AMD Radeon RX 7800 XT is a RDNA 3.0 architecture GPU with 3840 shading units, 240 TMUs, and 96 ROPs. It operates at a base clock of 1295 MHz and boosts to 2430 MHz, with a game clock of 2124 MHz. The GPU has 16 GB of GDDR6 memory on a 256-bit bus, providing 624.1 GB/s of bandwidth. These specs place it in the upper mid-range of GPUs, with a percentile of 76 among all GPUs.
The GPU’s benchmark scores include 24176 in Passmark G3D and 139381 in Geekbench OpenCL. Its nearest rivals are the AMD FirePro S9300 X2 (0.2% faster) and the NVIDIA P104-100 (0.4% slower). These are professional or older gaming GPUs, indicating the RX 7800 XT is a solid performer.
In Archeage, the GPU’s role is dominant. The measured FPS at 1080p Medium (164.4 FPS) and High (113.0 FPS) show that the GPU has ample power for lower resolutions. However, at 4K, the GPU’s 233.3 GPixel/s pixel rate becomes a limiting factor. The 4K Ultra result of 31.8 FPS is evidence that the GPU cannot sustain the fill rate required at that resolution with high settings. The 16 GB VRAM is more than sufficient, but the compute and memory bandwidth are stretched at 4K. The data suggests that the RX 7800 XT is best paired with 1440p displays for a balance of visual quality and frame rate.
Hardware Specifications
Intel Core i5-10400F
AMD Radeon RX 7800 XT
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-10400F + AMD Radeon RX 7800 XT in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 73.1 |
| 3840x2160 | Medium | 67.5 |
| 3840x2160 | High | 46.5 |
| 3840x2160 | Ultra | 31.8 |
| 2560x1440 | Low | 127.9 |
| 2560x1440 | Medium | 113.7 |
| 2560x1440 | High | 78.5 |
| 2560x1440 | Ultra | 50.3 |
| 1920x1080 | Low | 167.2 |
| 1920x1080 | Medium | 164.4 |
| 1920x1080 | High | 113.0 |
| 1920x1080 | Ultra | 77.1 |
Archeage with ii5-10400F + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 7800 XT + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with ii5-10400F + RX 7800 XT
Explore FPS benchmarks for other games using this same hardware combination.